rusefi
/
rusefi-full
mirror of https://github.com/rusefi/rusefi-full.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

hbridge idle ui (#1178)

This commit is contained in:
Matthew Kennedy 2020-03-10 11:31:00 -07:00 committed by GitHub
parent ca8a3b1e1f
commit 1cdd1b86a9
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 28 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
firmware/tunerstudio/rusefi.input
View File

@ -2011,24 +2011,38 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "Idle Solenoid Pin", idle_solenoidPin, !useStepperIdle
field = "Second Idle Solenoid Pin", secondSolenoidPin, { !useStepperIdle && isDoubleSolenoidIdle }
field = "Idle Solenoid Frequency", idle_solenoidFrequency, !useStepperIdle
dialog = hbridgeHardware, "H-Bridge Hardware"
field = "PWM Frequency", etbFreq
field = "Two-wire mode", etb_use_two_wires
field = "No1 Direction #1", etbIo1_directionPin1
field = "No1 Direction #2", etbIo1_directionPin2
field = "No1 Control #1", etbIo1_controlPin1, { etb_use_two_wires == 0 }
field = "No2 Direction #1", etbIo2_directionPin1
field = "No2 Direction #2", etbIo2_directionPin2
field = "No2 Control #1", etbIo2_controlPin1, { etb_use_two_wires == 0}
dialog = idleStepperHw, "Stepper Hardware"
field = "Idle Stepper Step Pin", idle_stepperStepPin
field = "Idle Stepper Dir Pin", idle_stepperDirectionPin
field = "Idle Stepper Enable Pin", stepperEnablePin
field = "Idle Stepper Enable Pin Mode", stepperEnablePinMode
dialog = idleStepper, "Stepper"
field = "useHbridges", useHbridges
field = "Idle Stepper Step Pin", idle_stepperStepPin, useStepperIdle
field = "Idle Stepper Dir Pin", idle_stepperDirectionPin, useStepperIdle
field = "Idle Stepper Enable Pin", stepperEnablePin, useStepperIdle
field = "Idle Stepper Enable Pin Mode", stepperEnablePinMode, useStepperIdle
field = "Drive stepper with dual H bridges", useHbridges, useStepperIdle
field = "Stepper reaction time", idleStepperReactionTime, useStepperIdle
field = "Stepper total steps", idleStepperTotalSteps, useStepperIdle
field = "Stepper parking extra steps, %", stepperParkingExtraSteps, useStepperIdle
field = "Force parking every restart", stepperForceParkingEveryRestart, useStepperIdle
panel = idleStepperHw, { useStepperIdle && !useHbridges }
panel = hbridgeHardware, { useStepperIdle && useHbridges }
dialog = idleHwType, "Idle Valve Hardware", border
panel = idleSolenoid, West
panel = idleStepper, East
dialog = idlehw, "", yAxis
field = "!ECU reboot needed to apply these settings"
field = "!ECU reboot needed to apply these settings"
field = "Use Stepper", useStepperIdle
field = "Double Solenoid Mode", isDoubleSolenoidIdle
panel = idleHwType
@ -2615,17 +2629,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "Pause ETB control", pauseEtbControl
field = "Throttle Pedal Up", throttlePedalUpVoltage
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage
field = "Two-wire mode", etb_use_two_wires, {throttlePedalPositionAdcChannel != 16}
field = "PWM Frequency", etbFreq, {throttlePedalPositionAdcChannel != 16}
field = etbCalibrationOnStart, etbCalibrationOnStart
field = "No1 Direction #1", etbIo1_directionPin1, {throttlePedalPositionAdcChannel != 16}
field = "No1 Direction #2", etbIo1_directionPin2, {throttlePedalPositionAdcChannel != 16}
field = "No1 Control #1", etbIo1_controlPin1, {throttlePedalPositionAdcChannel != 16 && etb_use_two_wires == 0}
field = "No2 Direction #1", etbIo2_directionPin1, {throttlePedalPositionAdcChannel != 16}
field = "No2 Direction #2", etbIo2_directionPin2, {throttlePedalPositionAdcChannel != 16}
field = "No2 Control #1", etbIo2_controlPin1, {throttlePedalPositionAdcChannel != 16 && etb_use_two_wires == 0}
field = "TPS#2 min", tps2Min, {etbIo2_directionPin1 != 0}
field = "TPS#2 max", tps2Max, {etbIo2_directionPin1 != 0}
field = "TPS#2 min", tps2Min, { tps2_1AdcChannel != 16 }
field = "TPS#2 max", tps2Max, { tps2_1AdcChannel != 16 }
; we need the term about stepper idle in here, because there's a bug in TS that you can't have different visibility
; criteria for the same panel when used in multiple places
panel = hbridgeHardware, { throttlePedalPositionAdcChannel != 16 || useStepperIdle && useHbridges }
panel = etbPidDialog
dialog = etbDialogRight