rusefi
/
rusefi-full
mirror of https://github.com/rusefi/rusefi-full.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Tooltip and UI updates #2714 

cherry-pick
This commit is contained in:
rusefillc 2021-05-21 15:17:55 -04:00
parent 31797b52fa
commit 636fbbc393
1 changed files with 10 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
firmware/tunerstudio/rusefi.input
View File

@ -1999,7 +1999,8 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
dialog = multisparkSettings, "Multispark"
field = "#WARNING! These settings have the potential to overheat ignition components"
field = "#and cause other nasty misbehavior. Use with care, at your own risk!"
field = "Enable Multiple Sparks", multisparkEnable
field = "#Not recommended for use on distributor or wasted spark ignition systems."
field = "Enable multiple sparks", multisparkEnable
panel = multisparkMain
panel = multisparkDwellParams
@ -2614,7 +2615,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
dialog = idleGating, "Idle Detection Thresholds"
field = "TPS threshold", idlePidDeactivationTpsThreshold
field = "RPM upper limit", idlePidRpmUpperLimit
field = "RPM dead zone", idlePidRpmDeadZone
field = "RPM deadzone", idlePidRpmDeadZone
dialog = idleExtra, "Extra Idle Features"
field = "Extra idle air if throttle pressed", iacByTpsTaper
@ -2627,7 +2628,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
dialog = idleSettings, "", yAxis
field = "Idle control mode", idleMode
field = "! Solenoid idle control requires above zero RPM"
field = "! Solenoid idle control is disabled at zero RPM"
slider = "Open loop idle position", manIdlePosition, horizontal
field = ""
@ -2778,26 +2779,26 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
field = "Power region load", stft_minPowerLoad
dialog = stftPartitionSettingsMain, "Main Region", xAxis
field = "Time Const", stft_cellCfgs4_timeConstant
field = "Time const", stft_cellCfgs4_timeConstant
field = "Max add", stft_cellCfgs4_maxAdd
field = "Max remove", stft_cellCfgs4_maxRemove
dialog = stftPartitionSettingsIdle, "Idle Region", xAxis
field = "Time Const", stft_cellCfgs1_timeConstant
field = "Time const", stft_cellCfgs1_timeConstant
field = "Max add", stft_cellCfgs1_maxAdd
field = "Max remove", stft_cellCfgs1_maxRemove
dialog = stftPartitionSettingsPower, "Power Region", xAxis
field = "Time Const", stft_cellCfgs3_timeConstant
field = "Time const", stft_cellCfgs3_timeConstant
field = "Max add", stft_cellCfgs3_maxAdd
field = "Max remove", stft_cellCfgs3_maxRemove
dialog = stftPartitionSettingsOverrun, "Overrun Region", xAxis
field = "Time Const", stft_cellCfgs2_timeConstant
field = "Time const", stft_cellCfgs2_timeConstant
field = "Max add", stft_cellCfgs2_maxAdd
field = "Max remove", stft_cellCfgs2_maxRemove
dialog = fuelClosedLoopDialog, "Short-term fuel trim"
dialog = fuelClosedLoopDialog, "Closed loop fuel correction"
field = "Enabled", fuelClosedLoopCorrectionEnabled
field = "Startup delay" stft_startupDelay, {fuelClosedLoopCorrectionEnabled == 1}
@ -3056,7 +3057,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
; Cranking->Cranking Settings
dialog = crankingDialog, "Cranking Settings"
field = "Cranking RPM limit", cranking_rpm
field = "Enable cylinder cleanup", isCylinderCleanupEnabled
field = "Enable flood clear", isCylinderCleanupEnabled
field = ""
field = "Enable faster engine spin-up", isFasterEngineSpinUpEnabled
panel = primingFuelPulsePanel