From 9481b4e3e05088efd6bbe7dc8136d72d5878a440 Mon Sep 17 00:00:00 2001 From: Matthew Kennedy Date: Wed, 6 Oct 2021 11:11:39 -0700 Subject: [PATCH] Add clt/iat presets (#3326) Co-authored-by: Matthew Kennedy --- firmware/tunerstudio/rusefi.input | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/firmware/tunerstudio/rusefi.input b/firmware/tunerstudio/rusefi.input index fdbc20e1ff..7759810364 100644 --- a/firmware/tunerstudio/rusefi.input +++ b/firmware/tunerstudio/rusefi.input @@ -2472,6 +2472,12 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00" field = "Input channel", clt_adcChannel field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != @@ADC_CHANNEL_NONE@@} + settingSelector = "Common CLT Sensors" + settingOption = "GM CLT", clt_tempC_1=0,clt_resistance_1=9240,clt_tempC_2=40,clt_resistance_2=1459,clt_tempC_3=100,clt_resistance_3=177,useLinearCltSensor=0 + settingOption = "Miata NA", clt_tempC_1=-20,clt_resistance_1=16150,clt_tempC_2=40,clt_resistance_2=1150,clt_tempC_3=80,clt_resistance_3=330,useLinearCltSensor=0 + settingOption = "Miata NB", clt_tempC_1=-10,clt_resistance_1=9000,clt_tempC_2=20,clt_resistance_2=2500,clt_tempC_3=80,clt_resistance_3=320,useLinearCltSensor=0 + settingOption = "Bosch Various", clt_tempC_1=0,clt_resistance_1=5896,clt_tempC_2=50,clt_resistance_2=834,clt_tempC_3=100,clt_resistance_3=187,useLinearCltSensor=0 + field = "#Input three pairs of thermistor temperature and resistance." field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C" field = "" @@ -2499,6 +2505,11 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00" field = "Input channel", iat_adcChannel field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != @@ADC_CHANNEL_NONE@@} + settingSelector = "Common IAT Sensors", {iat_adcChannel != 0} + settingOption = "GM IAT", iat_tempC_1=8.9,iat_resistance_1=7000,iat_tempC_2=30.6,iat_resistance_2=1930,iat_tempC_3=63.3,iat_resistance_3=560,useLinearIatSensor=0 + settingOption = "Miata NA/NB", iat_tempC_1=-20,iat_resistance_1=16150,iat_tempC_2=40,iat_resistance_2=1150,iat_tempC_3=80,iat_resistance_3=330,useLinearIatSensor=0 + settingOption = "Bosch Various", iat_tempC_1=-10,iat_resistance_1=9397,iat_tempC_2=30,iat_resistance_2=1707,iat_tempC_3=70,iat_resistance_3=436,useLinearIatSensor=0 + field = "#Input three pairs of thermistor temperature and resistance." field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C" field = ""