mapping docs

firmware/config/boards/microrusefi/mapping.yaml

@@ -1,3 +1,8 @@
+#
+# microRusEfi board
+# https://github.com/rusefi/rusefi_documentation/wiki/Hardware_microRusEfi_wiring
+#
+
 outputs:
   # TLE8888 injector channels
   GPIOE_14: "37 - Injector 1"

firmware/config/boards/proteus/mapping.yaml

@@ -1,3 +1,8 @@
+#
+# proteus board
+# https://github.com/mck1117/proteus/blob/master/readme_pinout.md
+#
+
 outputs:
   GPIOD_7:  "Lowside 1"
   GPIOG_9:  "Lowside 2"
@@ -53,19 +58,35 @@ switch_inputs:
   GPIOE_15: "Digital 6"
 
 analog_inputs:
+  # PA0
   EFI_ADC_0: "Analog Volt 5"
+  # PA1
   EFI_ADC_1: "Analog Volt 6"
+  # PA2
   EFI_ADC_2: "Analog Volt 7"
+  # PA3
   EFI_ADC_3: "Analog Volt 8"
+  # PA4
   EFI_ADC_4: "Analog Volt 9"
+  # PA5
   EFI_ADC_5: "Analog Volt 10"
+  # PA6
   EFI_ADC_6: "Analog Volt 11"
+  # PA7
   EFI_ADC_7: "Analog Volt 12"
+  # CLT = Analog Temp 3 = PB0
   EFI_ADC_8: "Analog Temp 3"
+  # PB1
   EFI_ADC_9: "Analog Temp 4"
+  # MAP = Analog volt 1 = PC0
   EFI_ADC_10: "Analog Volt 1"
+  # TPS = Analog volt 2 = PC1
   EFI_ADC_11: "Analog Volt 2"
+  # PC2
   EFI_ADC_12: "Analog Volt 3"
+  # PC3
   EFI_ADC_13: "Analog Volt 4"
+  # PC4
   EFI_ADC_14: "Analog Temp 1"
+  # IAT = Analog Temp 2 = PC5
   EFI_ADC_15: "Analog Temp 2"