TinerStudio: no need to have 3s timeout, 300mS is ok for single-back devices. fix #4360

firmware/config/boards/subaru_eg33/prepend.txt

@@ -17,3 +17,5 @@
 #define show_test_presets false
 #define show_Frankenso_presets false
 #define show_Proteus_presets false
+
+#define TS_BLOCK_READ_TIMEOUT 300

firmware/integration/rusefi_config.txt

@@ -1947,6 +1947,10 @@ end_struct
 #define TS_RESPONSE_OUT_OF_RANGE 0x84
 #define TS_RESPONSE_FRAMING_ERROR 0x8D
 
+! we need 3 seconds on single-bank to survive write-to-flash reconnect
+! dual-bank devices can go with 300 for better TS reconnect experience
+#define TS_BLOCK_READ_TIMEOUT 3000
+
 #define MLQ_HEADER_SIZE 22
 #define MLQ_FIELD_HEADER_SIZE 55
 

firmware/tunerstudio/rusefi.input

@@ -74,7 +74,7 @@ enable2ndByteCanID = false
 ;e.g. put writeblocks off and add an interwrite delay
    writeBlocks = on
    interWriteDelay = 10
-   blockReadTimeout    = 3000; Milliseconds general timeout
+   blockReadTimeout    = @@TS_BLOCK_READ_TIMEOUT@@; Milliseconds general timeout
    
  ; delayAfterPortOpen = 500