Clutch switch inverted options do not invert detected pedal position

#3044

firmware/integration/rusefi_config.txt

@@ -984,9 +984,8 @@ custom maf_sensor_type_e 4 bits, S32, @OFFSET@, [0:1], @@maf_sensor_type_e_enum@
 	uint16_t multisparkMaxRpm;+Disable multispark above this engine speed.;"rpm", 1, 0, 0, 3000, 0
 	uint8_t multisparkMaxSparkingAngle;+This parameter sets the latest that the last multispark can occur after the main ignition event. For example, if the ignition timing is 30 degrees BTDC, and this parameter is set to 45, no multispark will ever be fired after 15 degrees ATDC.;"deg", 1, 0, 0, 60, 0
 	uint8_t multisparkMaxExtraSparkCount;+Configures the maximum number of extra sparks to fire (does not include main spark);"count", 1, 0, 1, 5, 0
-! do we need those? https://github.com/rusefi/rusefi/issues/3044
-	bit todoClutchUpPinInverted
-	bit todoClutchDownPinInverted
+	bit clutchUpPinInverted
+	bit clutchDownPinInverted
 	bit useHbridges;+If enabled we use two H-bridges to drive stepper idle air valve
 	bit multisparkEnable
 	bit enableLaunchRetard

firmware/tunerstudio/rusefi.input

@@ -2194,9 +2194,12 @@ cmd_set_engine_type_default					= "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
 ;			Sensor Inputs
 	dialog = otherSensorInputs,					"Other Sensor Inputs"
 		field = "Clutch down switch",					clutchDownPin
-		field = "Clutch down inverted",					clutchDownPinMode
+		field = "Clutch down inverted",					clutchDownPinInverted
+		field = "Clutch down mode",						clutchDownPinMode
+		
 		field = "Clutch up switch",						clutchUpPin
-		field = "Clutch up inverted",					clutchUpPinMode
+		field = "Clutch up inverted",					clutchUpPinInverted					
+		field = "Clutch up mode",						clutchUpPinMode
 		field = "Throttle Up switch",					throttlePedalUpPin
 		field = "Brake pedal switch",					brakePedalPin
 		field = "Flex fuel sensor",					flexSensorPin