Use pch in lots of files (#3066)

* most engine.h

* most engine_configuration

* more

* more

* more

* more

* more

* moooooore

* ok I'm done for now

* oops

firmware/bootloader/src/rusefi_stubs.cpp

@@ -1,6 +1,6 @@
-#include "global.h"
+#include "pch.h"
+
 #include "hardware.h"
-#include "efi_gpio.h"
 
 /*
  * We need only a small portion of code from rusEFI codebase in the bootloader.

firmware/console/status_loop.cpp

@@ -24,10 +24,9 @@
  *
  */
 
-#include "global.h"
+#include "pch.h"
 #include "status_loop.h"
 #include "hip9011_logic.h"
-#include "engine_controller.h"
 
 #include "adc_inputs.h"
 #if EFI_LOGIC_ANALYZER
@@ -35,10 +34,7 @@
 #endif /* EFI_LOGIC_ANALYZER */
 
 #include "trigger_central.h"
-#include "allsensors.h"
 #include "sensor_reader.h"
-#include "io_pins.h"
-#include "efi_gpio.h"
 #include "mmc_card.h"
 #include "console_io.h"
 #include "malfunction_central.h"
@@ -48,15 +44,11 @@
 #include "tunerstudio.h"
 #include "fuel_math.h"
 #include "main_trigger_callback.h"
-#include "engine_math.h"
 #include "spark_logic.h"
 #include "idle_thread.h"
-#include "engine_configuration.h"
 #include "os_util.h"
 #include "svnversion.h"
-#include "engine.h"
 #include "lcd_controller.h"
-#include "settings.h"
 #include "can_hw.h"
 #include "periodic_thread_controller.h"
 #include "cdm_ion_sense.h"

firmware/controllers/actuators/ac_control.cpp

@@ -1,10 +1,7 @@
-#include "ac_control.h"
-#include "engine.h"
+#include "pch.h"
 
+#include "ac_control.h"
 #include "deadband.h"
-#include "efi_gpio.h"
-#include "sensor.h"
-#include "tunerstudio_outputs.h"
 
 // Deadbands to prevent rapid switching on/off of AC
 static Deadband<200> maxRpmDeadband;

firmware/controllers/actuators/alternator_controller.cpp

@@ -7,24 +7,14 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
-
-#if EFI_TUNER_STUDIO
-#include "tunerstudio_outputs.h"
-#endif /* EFI_TUNER_STUDIO */
+#include "pch.h"
 
 #if EFI_ALTERNATOR_CONTROL
-#include "engine.h"
-#include "rpm_calculator.h"
 #include "alternator_controller.h"
 #include "pid.h"
 #include "local_version_holder.h"
 #include "periodic_task.h"
 
-#include "pwm_generator_logic.h"
-#include "pin_repository.h"
-
-
 #if defined(HAS_OS_ACCESS)
 #error "Unexpected OS ACCESS HERE"
 #endif /* HAS_OS_ACCESS */

firmware/controllers/actuators/boost_control.cpp

@@ -4,18 +4,11 @@
  *  Created on: 13. des. 2019
  *      Author: Ola Ruud
  */
-#include "global.h"
+#include "pch.h"
 
 #if EFI_BOOST_CONTROL
 
-#if EFI_TUNER_STUDIO
-#include "tunerstudio_outputs.h"
-#endif /* EFI_TUNER_STUDIO */
-#include "engine.h"
 #include "boost_control.h"
-#include "sensor.h"
-#include "pin_repository.h"
-#include "pwm_generator_logic.h"
 #include "pid_auto_tune.h"
 #include "electronic_throttle.h"
 

firmware/controllers/actuators/dc_motors.cpp

@@ -5,18 +5,13 @@
  * @author Matthew Kennedy (c) 2020
  */
 
-#include "engine.h"
-#include "io_pins.h"
-#include "engine_configuration.h"
-#include "engine_controller.h"
+#include "pch.h"
+
 #include "periodic_task.h"
 
 #include "dc_motors.h"
 #include "dc_motor.h"
 
-#include "efi_gpio.h"
-#include "pwm_generator_logic.h"
-
 class DcHardware {
 private:
 	OutputPin m_pinEnable;

firmware/controllers/actuators/electronic_throttle.cpp

@@ -72,14 +72,11 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if EFI_ELECTRONIC_THROTTLE_BODY
 
 #include "electronic_throttle_impl.h"
-#include "engine.h"
-#include "tps.h"
-#include "sensor.h"
 #include "dc_motor.h"
 #include "dc_motors.h"
 #include "pid_auto_tune.h"

firmware/controllers/actuators/fan_control.cpp

@@ -1,9 +1,8 @@
+#include "pch.h"
+
 #include "fan_control.h"
-#include "engine.h"
 
 #include "bench_test.h"
-#include "efi_gpio.h"
-#include "sensor.h"
 
 static void fanControl(bool acActive, OutputPin& pin, int8_t fanOnTemp, int8_t fanOffTemp, bool enableWithAc, bool disableWhenStopped DECLARE_ENGINE_PARAMETER_SUFFIX) {
 	auto [cltValid, clt] = Sensor::get(SensorType::Clt);

firmware/controllers/actuators/gppwm/gppwm.cpp

@@ -1,10 +1,7 @@
 
-#include "global.h"
-#include "engine.h"
-#include "pin_repository.h"
+#include "pch.h"
 
 #include "gppwm_channel.h"
-#include "pwm_generator_logic.h"
 
 static GppwmChannel channels[GPPWM_CHANNELS];
 static OutputPin pins[GPPWM_CHANNELS];

firmware/controllers/actuators/gppwm/gppwm_channel.cpp

@@ -1,12 +1,10 @@
 
+#include "pch.h"
+
 #include "gppwm_channel.h"
 
-#include "engine.h"
-#include "pwm_generator_logic.h"
 #include "table_helper.h"
 #include "expected.h"
-#include "sensor.h"
-#include "engine_math.h"
 
 expected<float> readGppwmChannel(gppwm_channel_e channel DECLARE_ENGINE_PARAMETER_SUFFIX) {
 	switch (channel) {

firmware/controllers/actuators/idle_hardware.cpp

@@ -7,20 +7,16 @@
  * This is just the hardware interface - deciding where to put the valve happens in idle_thread.cpp
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if EFI_IDLE_CONTROL
-#include "engine_configuration.h"
 #include "idle_hardware.h"
 
-#include "engine.h"
 #include "electronic_throttle.h"
 
-#include "pwm_generator_logic.h"
 #include "dc_motors.h"
 #if ! EFI_UNIT_TEST
 #include "stepper.h"
-#include "pin_repository.h"
 static StepDirectionStepper iacStepperHw;
 static DualHBridgeStepper iacHbridgeHw;
 StepperMotor iacMotor;

firmware/controllers/actuators/idle_thread.cpp

@@ -27,20 +27,14 @@
  *
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if EFI_IDLE_CONTROL
-#include "engine_configuration.h"
-#include "rpm_calculator.h"
 #include "idle_thread.h"
 #include "idle_hardware.h"
-#include "engine_math.h"
 
-#include "engine.h"
 #include "periodic_task.h"
-#include "allsensors.h"
 #include "vehicle_speed.h"
-#include "sensor.h"
 #include "dc_motors.h"
 
 #if EFI_TUNER_STUDIO

firmware/controllers/actuators/pwm_tester.cpp

@@ -6,14 +6,11 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if EFI_PWM_TESTER
 
 #include "pwm_tester.h"
-#include "state_requence.h"
-#include "pwm_generator_logic.h"
-#include "engine.h"
 
 static SimplePwm pwmTest[5];
 

firmware/controllers/actuators/vvt.cpp

@@ -5,14 +5,12 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
+#include "pch.h"
+
 #include "local_version_holder.h"
-#include "allsensors.h"
 #include "vvt.h"
 
-#include "tunerstudio_outputs.h"
 #include "fsio_impl.h"
-#include "engine_math.h"
-#include "pin_repository.h"
 
 #define NO_PIN_PERIOD 500
 

firmware/controllers/algo/accel_enrichment.cpp

@@ -21,16 +21,9 @@
  * @author Matthew Kennedy
  */
 
-#include "global.h"
-#include "engine.h"
+#include "pch.h"
 #include "trigger_central.h"
 #include "accel_enrichment.h"
-#include "allsensors.h"
-#include "engine_math.h"
-#include "perf_trace.h"
-#if EFI_TUNER_STUDIO
-#include "tunerstudio_outputs.h"
-#endif /* EFI_TUNER_STUDIO */
 
 static tps_tps_Map3D_t tpsTpsMap;
 

firmware/controllers/algo/advance_map.cpp

@@ -18,15 +18,10 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
-#include "engine_configuration.h"
-#include "engine.h"
+#include "pch.h"
+
 #include "advance_map.h"
-#include "interpolation.h"
-#include "engine_math.h"
-#include "sensor.h"
 #include "idle_thread.h"
-#include "allsensors.h"
 #include "launch_control.h"
 
 #if EFI_ENGINE_CONTROL

firmware/controllers/algo/airmass/airmass.cpp

@@ -1,5 +1,6 @@
+#include "pch.h"
+
 #include "airmass.h"
-#include "sensor.h"
 #include "idle_thread.h"
 
 AirmassVeModelBase::AirmassVeModelBase(const ValueProvider3D& veTable) : m_veTable(&veTable) {}

firmware/controllers/algo/airmass/alphan_airmass.cpp

@@ -1,5 +1,6 @@
+#include "pch.h"
+
 #include "alphan_airmass.h"
-#include "sensor.h"
 
 AirmassResult AlphaNAirmass::getAirmass(int rpm) {
 	auto tps = Sensor::get(SensorType::Tps1);

firmware/controllers/algo/airmass/maf_airmass.cpp

@@ -1,5 +1,4 @@
-#include "global.h"
-#include "engine.h"
+#include "pch.h"
 #include "maf_airmass.h"
 #include "maf.h"
 

firmware/controllers/algo/airmass/speed_density_airmass.cpp

@@ -1,7 +1,5 @@
-#include "global.h"
-#include "engine.h"
+#include "pch.h"
 #include "speed_density_airmass.h"
-#include "perf_trace.h"
 
 AirmassResult SpeedDensityAirmass::getAirmass(int rpm) {
 	ScopePerf perf(PE::GetSpeedDensityFuel);

firmware/controllers/algo/defaults/default_base_engine.cpp

@@ -1,5 +1,6 @@
+#include "pch.h"
+
 #include "defaults.h"
-#include "engine_configuration.h"
 
 static void setDefaultAlternatorParameters(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
 	engineConfiguration->alternatorOffAboveTps = 120;

firmware/controllers/algo/defaults/default_cranking.cpp

@@ -1,5 +1,6 @@
+#include "pch.h"
+
 #include "defaults.h"
-#include "engine_configuration.h"
 #include "table_helper.h"
 
 void setDefaultCranking(DECLARE_CONFIG_PARAMETER_SIGNATURE) {

firmware/controllers/algo/defaults/default_fuel.cpp

@@ -1,5 +1,6 @@
+#include "pch.h"
+
 #include "defaults.h"
-#include "engine_configuration.h"
 #include "table_helper.h"
 #include "mazda_miata_vvt.h"
 

firmware/controllers/algo/defaults/default_ignition.cpp

@@ -1,6 +1,6 @@
+#include "pch.h"
+
 #include "defaults.h"
-#include "engine_configuration.h"
-#include "engine_math.h"
 #include "table_helper.h"
 
 static void setDefaultMultisparkParameters(DECLARE_CONFIG_PARAMETER_SIGNATURE) {

firmware/controllers/algo/dynoview.cpp

@@ -5,18 +5,12 @@
  * @author Alexandru Miculescu, (c) 2012-2020
  */
 
-#include "engine.h"
-#include "pin_repository.h"
+#include "pch.h"
 
 #if EFI_DYNO_VIEW
 #include "dynoview.h"
 #include "vehicle_speed.h"
 
-#if EFI_TUNER_STUDIO
-#include "tunerstudio_outputs.h"
-extern TunerStudioOutputChannels tsOutputChannels;
-#endif /* EFI_TUNER_STUDIO */
-
 DynoView dynoInstance;
 
 void DynoView::update(vssSrc src) {

firmware/controllers/algo/engine2.cpp

@@ -7,21 +7,16 @@
 
 // todo: move this code to more proper locations
 
-#include "engine.h"
+#include "pch.h"
 #include "thermistors.h"
 #include "speed_density.h"
-#include "allsensors.h"
 #include "fuel_math.h"
-#include "engine_math.h"
 #include "advance_map.h"
 #include "aux_valves.h"
-#include "perf_trace.h"
 #include "closed_loop_fuel.h"
-#include "sensor.h"
 #include "launch_control.h"
 #include "injector_model.h"
 
-
 #if EFI_PROD_CODE
 #include "svnversion.h"
 #endif

firmware/controllers/algo/engine_configuration.cpp

@@ -20,16 +20,12 @@
  *
  */
 
-#include "global.h"
+#include "pch.h"
+
 #include "os_access.h"
-#include "engine_configuration.h"
 #include "fsio_impl.h"
-#include "allsensors.h"
-#include "interpolation.h"
-#include "engine_math.h"
 #include "speed_density.h"
 #include "advance_map.h"
-#include "sensor.h"
 #include "flash_main.h"
 
 #include "hip9011_logic.h"

firmware/controllers/algo/event_registry.cpp

@@ -20,9 +20,9 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "pch.h"
+
 #include "event_registry.h"
-#include "global.h"
-#include "engine_math.h"
 
 InjectionEvent::InjectionEvent() {
 	memset(outputs, 0, sizeof(outputs));

firmware/controllers/algo/fuel/injector_model.cpp

@@ -1,6 +1,6 @@
+#include "pch.h"
+
 #include "injector_model.h"
-#include "tunerstudio_outputs.h"
-#include "map.h"
 
 void InjectorModelBase::prepare() {
 	m_massFlowRate = getInjectorMassFlowRate();

firmware/controllers/algo/fuel_math.cpp

@@ -21,7 +21,8 @@
  *
  */
 
-#include "global.h"
+#include "pch.h"
+
 #include "airmass.h"
 #include "alphan_airmass.h"
 #include "maf_airmass.h"
@@ -29,14 +30,7 @@
 #include "fuel_math.h"
 #include "fuel_computer.h"
 #include "injector_model.h"
-#include "interpolation.h"
-#include "engine_configuration.h"
-#include "allsensors.h"
-#include "engine_math.h"
-#include "rpm_calculator.h"
 #include "speed_density.h"
-#include "perf_trace.h"
-#include "sensor.h"
 #include "speed_density_base.h"
 #include "lua_hooks.h"
 

firmware/controllers/algo/launch_control.cpp

@@ -5,21 +5,13 @@
  *      Author: Ola Ruud
  */
 
-#include "engine.h"
+#include "pch.h"
 
 #if EFI_LAUNCH_CONTROL
 #include "boost_control.h"
 #include "vehicle_speed.h"
 #include "launch_control.h"
-#include "io_pins.h"
-#include "engine_configuration.h"
-#include "engine_controller.h"
 #include "periodic_task.h"
-#include "pin_repository.h"
-#include "allsensors.h"
-#include "sensor.h"
-#include "engine_math.h"
-#include "efi_gpio.h"
 #include "advance_map.h"
 #include "engine_state.h"
 #include "advance_map.h"
@@ -28,11 +20,6 @@ static bool isInit = false;
 
 LaunchControlBase launchInstance;
 
-#if EFI_TUNER_STUDIO
-#include "tunerstudio_outputs.h"
-extern TunerStudioOutputChannels tsOutputChannels;
-#endif /* EFI_TUNER_STUDIO */
-
 static int retardThresholdRpm;
 
 /**

firmware/controllers/bench_test.cpp

@@ -21,7 +21,7 @@
  */
 
 // todo: rename this file
-#include "global.h"
+#include "pch.h"
 
 #if EFI_ENGINE_CONTROL
 #if !EFI_UNIT_TEST
@@ -29,19 +29,12 @@
 #include "os_access.h"
 #include "flash_main.h"
 #include "bench_test.h"
-#include "io_pins.h"
 #include "main_trigger_callback.h"
-#include "engine_configuration.h"
-#include "pin_repository.h"
-#include "efi_gpio.h"
-#include "settings.h"
 #include "idle_thread.h"
 #include "periodic_thread_controller.h"
-#include "tps.h"
 #include "electronic_throttle.h"
 #include "cj125.h"
 #include "malfunction_central.h"
-#include "tunerstudio_outputs.h"
 #include "trigger_emulator_algo.h"
 #include "microsecond_timer.h"
 

firmware/controllers/buttonshift.cpp

@@ -5,8 +5,10 @@
  * @date Aug 31, 2020
  * @author David Holdeman, (c) 2020
  */
+
+#include "pch.h"
+
 #include "buttonshift.h"
-#include "engine.h"
 
 ButtonShiftController buttonShiftController;
 

firmware/controllers/can/can_dash.cpp

@@ -7,15 +7,12 @@
  * @author Matthew Kennedy, (c) 2020
  */
 
-#include "globalaccess.h"
-#if EFI_CAN_SUPPORT
+#include "pch.h"
 
-#include "engine.h"
+#if EFI_CAN_SUPPORT
 #include "can_dash.h"
 #include "can_msg_tx.h"
 
-#include "sensor.h"
-#include "allsensors.h"
 #include "vehicle_speed.h"
 #include "rtc_helper.h"
 #include "fuel_math.h"

firmware/controllers/can/can_rx.cpp

@@ -8,8 +8,7 @@
  * @author Matthew Kennedy, (c) 2020
  */
 
-#include "global.h"
-#include "engine.h"
+#include "pch.h"
 
 typedef float fsio_table_8x8_f32t_linear[FSIO_TABLE_8 * FSIO_TABLE_8];
 
@@ -53,7 +52,6 @@ bool acceptCanRx(int sid DECLARE_ENGINE_PARAMETER_SUFFIX) {
 
 #include "can.h"
 #include "obd2.h"
-#include "engine.h"
 #include "can_sensor.h"
 #include "can_vss.h"
 #include "rusefi_wideband.h"

firmware/controllers/can/can_tx.cpp

@@ -7,10 +7,9 @@
  * @author Matthew Kennedy, (c) 2020
  */
 
-#include "globalaccess.h"
-#if EFI_CAN_SUPPORT
+#include "pch.h"
 
-#include "engine.h"
+#if EFI_CAN_SUPPORT
 #include "can.h"
 #include "can_hw.h"
 #include "can_dash.h"

firmware/controllers/can/can_verbose.cpp

@@ -6,16 +6,12 @@
  * @author Matthew Kennedy, (c) 2020
  */
 
-#include "globalaccess.h"
+#include "pch.h"
 #if EFI_CAN_SUPPORT
 
-#include "engine.h"
-
 #include "scaled_channel.h"
 #include "can_msg_tx.h"
-#include "sensor.h"
 #include "can.h"
-#include "allsensors.h"
 #include "fuel_math.h"
 #include "spark_logic.h"
 #include "vehicle_speed.h"

firmware/controllers/can/can_vss.cpp

@@ -7,11 +7,10 @@
  * @author Alex Miculescu, (c) 2020
  */
 
-#include "globalaccess.h"
+#include "pch.h"
+
 #if EFI_CAN_SUPPORT
 #include "can.h"
-#include "engine_configuration.h"
-#include "engine.h"
 #include "vehicle_speed.h"
 #include "dynoview.h"
 

firmware/controllers/can/obd2.cpp

@@ -21,19 +21,14 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if EFI_CAN_SUPPORT
 #include "os_access.h"
-#include "engine.h"
 #include "obd2.h"
 #include "can.h"
 #include "can_msg_tx.h"
 #include "vehicle_speed.h"
-#include "map.h"
-#include "maf.h"
-#include "sensor.h"
-#include "engine_math.h"
 #include "fuel_math.h"
 #include "thermistors.h"
 

firmware/controllers/can/rusefi_wideband.cpp

@@ -1,12 +1,10 @@
-#include "global.h"
+#include "pch.h"
 
 #if EFI_WIDEBAND_FIRMWARE_UPDATE && EFI_CAN_SUPPORT
 
 #include "ch.h"
 #include "can_msg_tx.h"
 #include "rusefi_wideband.h"
-#include "sensor.h"
-#include "engine.h"
 
 // This file contains an array called build_wideband_noboot_bin
 // This array contains the firmware image for the wideband contoller

firmware/controllers/core/error_handling.cpp

@@ -5,9 +5,8 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "engine.h"
+#include "pch.h"
 #include "os_access.h"
-#include "perf_trace.h"
 
 static critical_msg_t warningBuffer;
 static critical_msg_t criticalErrorMessageBuffer;

firmware/controllers/core/fsio_impl.cpp

@@ -11,10 +11,9 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
+
 #include "fsio_impl.h"
-#include "allsensors.h"
-#include "sensor.h"
 
 #if EFI_PROD_CODE
 
@@ -25,10 +24,6 @@
 #if EFI_FSIO
 
 #include "os_access.h"
-#include "settings.h"
-#include "rpm_calculator.h"
-#include "efi_gpio.h"
-#include "pwm_generator_logic.h"
 
 /**
  * in case of zero frequency pin is operating as simple on/off. '1' for ON and '0' for OFF
@@ -177,9 +172,6 @@ FsioResult getEngineValue(le_action_e action DECLARE_ENGINE_PARAMETER_SUFFIX) {
 
 #if EFI_PROD_CODE
 
-#include "pin_repository.h"
-#include "pwm_generator_logic.h"
-
 static void setFsioAnalogInputPin(const char *indexStr, const char *pinName) {
 // todo: reduce code duplication between all "set pin methods"
 	int index = atoi(indexStr) - 1;

firmware/controllers/engine_controller.cpp

@@ -21,22 +21,18 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
+#include "pch.h"
+
 #include "os_access.h"
 #include "trigger_central.h"
-#include "engine_controller.h"
 #include "fsio_core.h"
 #include "fsio_impl.h"
 #include "idle_thread.h"
 #include "advance_map.h"
-#include "rpm_calculator.h"
 #include "main_trigger_callback.h"
-#include "io_pins.h"
 #include "flash_main.h"
 #include "bench_test.h"
 #include "os_util.h"
-#include "engine_math.h"
-#include "allsensors.h"
 #include "electronic_throttle.h"
 #include "map_averaging.h"
 #include "high_pressure_fuel_pump.h"
@@ -46,12 +42,10 @@
 #include "local_version_holder.h"
 #include "alternator_controller.h"
 #include "fuel_math.h"
-#include "settings.h"
 #include "spark_logic.h"
 #include "aux_valves.h"
 #include "accelerometer.h"
 #include "vvt.h"
-#include "perf_trace.h"
 #include "boost_control.h"
 #include "launch_control.h"
 #include "tachometer.h"
@@ -89,12 +83,10 @@
 #endif /* EFI_UNIT_TEST */
 
 #include "adc_inputs.h"
-#include "pwm_generator_logic.h"
 
 #if EFI_PROD_CODE
 #include "pwm_tester.h"
 #include "lcd_controller.h"
-#include "pin_repository.h"
 #endif /* EFI_PROD_CODE */
 
 #if EFI_CJ125

firmware/controllers/engine_controller_misc.cpp

@@ -5,10 +5,8 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "engine_controller.h"
-#include "perf_trace.h"
+#include "pch.h"
 #include "os_access.h"
-#include "settings.h"
 
 extern ButtonDebounce startStopButtonDebounce;
 

firmware/controllers/engine_cycle/aux_valves.cpp

@@ -13,11 +13,9 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "pin_repository.h"
-#include "engine_math.h"
+#include "pch.h"
+
 #include "aux_valves.h"
-#include "allsensors.h"
-#include "sensor.h"
 #include "trigger_central.h"
 #include "spark_logic.h"
 

firmware/controllers/engine_cycle/fuel_schedule.cpp

@@ -4,9 +4,7 @@
  * Handles injection scheduling
  */
 
-#include "global.h"
-#include "engine.h"
-#include "engine_math.h"
+#include "pch.h"
 #include "event_registry.h"
 
 #if EFI_ENGINE_CONTROL

firmware/controllers/engine_cycle/knock_logic.cpp

@@ -5,7 +5,7 @@
  * @author Andrey Gusakov
  */
 
-#include "engine.h"
+#include "pch.h"
 #include "knock_logic.h"
 #include "os_access.h"
 

firmware/controllers/engine_cycle/main_trigger_callback.cpp

@@ -21,7 +21,8 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
+#include "pch.h"
+
 #include "os_access.h"
 
 #if EFI_PRINTF_FUEL_DETAILS
@@ -31,27 +32,16 @@
 #if EFI_ENGINE_CONTROL && EFI_SHAFT_POSITION_INPUT
 
 #include "main_trigger_callback.h"
-#include "efi_gpio.h"
-#include "engine_math.h"
 #include "trigger_central.h"
 #include "spark_logic.h"
-#include "rpm_calculator.h"
-#include "engine_configuration.h"
-#include "interpolation.h"
 #include "advance_map.h"
-#include "allsensors.h"
 #include "cyclic_buffer.h"
 #include "fuel_math.h"
 #include "cdm_ion_sense.h"
-#include "engine_controller.h"
-#include "efi_gpio.h"
 #include "tooth_logger.h"
 #include "os_util.h"
 #include "local_version_holder.h"
 #include "event_queue.h"
-#include "engine.h"
-#include "perf_trace.h"
-#include "sensor.h"
 #include "injector_model.h"
 #if EFI_LAUNCH_CONTROL
 #include "launch_control.h"

firmware/controllers/engine_cycle/map_averaging.cpp

@@ -21,22 +21,15 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
-#include "os_access.h"
+#include "pch.h"
 
-#include "map.h"
+#include "os_access.h"
 
 #if EFI_MAP_AVERAGING
 
 #include "map_averaging.h"
 #include "trigger_central.h"
 #include "adc_inputs.h"
-#include "allsensors.h"
-#include "engine_configuration.h"
-#include "interpolation.h"
-#include "engine.h"
-#include "engine_math.h"
-#include "perf_trace.h"
 
 #if EFI_SENSOR_CHART
 #include "sensor_chart.h"

firmware/controllers/engine_cycle/rpm_calculator.cpp

@@ -13,15 +13,10 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "globalaccess.h"
+#include "pch.h"
 #include "os_access.h"
-#include "engine.h"
-#include "rpm_calculator.h"
 
 #include "trigger_central.h"
-#include "engine_configuration.h"
-#include "engine_math.h"
-#include "perf_trace.h"
 #include "tooth_logger.h"
 
 #if EFI_PROD_CODE

firmware/controllers/engine_cycle/spark_logic.cpp

@@ -5,25 +5,20 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
+#include "pch.h"
+
 #include "software_knock.h"
 #include "spark_logic.h"
 #include "os_access.h"
-#include "engine_math.h"
 
 #include "utlist.h"
 #include "event_queue.h"
-#include "perf_trace.h"
 #include "tooth_logger.h"
 
 #include "hip9011.h"
-#include "engine_ptr.h"
 
 #if EFI_ENGINE_CONTROL
 
-#if EFI_TUNER_STUDIO
-#include "tunerstudio_outputs.h"
-#endif /* EFI_TUNER_STUDIO */
-
 #if EFI_UNIT_TEST
 extern bool verboseMode;
 #endif /* EFI_UNIT_TEST */

firmware/controllers/flash_main.cpp

@@ -7,14 +7,14 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
+
 #if EFI_INTERNAL_FLASH
 #include "os_access.h"
 #include "flash_main.h"
 #include "eficonsole.h"
 
 #include "flash_int.h"
-#include "engine_math.h"
 
 #if EFI_TUNER_STUDIO
 #include "tunerstudio.h"
@@ -22,8 +22,6 @@
 
 #include "runtime_state.h"
 
-#include "engine_controller.h"
-
 static bool needToWriteConfiguration = false;
 
 extern persistent_config_container_s persistentState;

firmware/controllers/gauges/lcd_controller.cpp

@@ -16,19 +16,14 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if EFI_HD44780_LCD
 #include "os_access.h"
 
 #include "lcd_controller.h"
 #include "HD44780.h"
-#include "rpm_calculator.h"
-#include "allsensors.h"
-#include "engine.h"
 #include "rtc_helper.h"
-#include "io_pins.h"
-#include "efi_gpio.h"
 #include "svnversion.h"
 #include "joystick.h"
 #include "utlist.h"
@@ -36,12 +31,9 @@
 #include "memstreams.h"
 #include "settings.h"
 #include "bench_test.h"
-#include "engine_controller.h"
 #include "mmc_card.h"
 #include "idle_thread.h"
 #include "fuel_math.h"
-#include "sensor.h"
-
 
 static MenuItem ROOT(NULL, NULL);
 

firmware/controllers/gauges/lcd_menu_tree.cpp

@@ -5,9 +5,10 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
+#include "pch.h"
+
 #include "stddef.h"
 #include "lcd_menu_tree.h"
-#include "error_handling.h"
 
 MenuTree::MenuTree(MenuItem *root) {
 	this->root = root;

firmware/controllers/gauges/malfunction_indicator.cpp

@@ -25,13 +25,11 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if EFI_MALFUNCTION_INDICATOR
-#include "io_pins.h"
 #include "malfunction_central.h"
 #include "malfunction_indicator.h"
-#include "efi_gpio.h"
 #include "os_access.h"
 #include "periodic_thread_controller.h"
 

firmware/controllers/gauges/tachometer.cpp

@@ -8,9 +8,9 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "pin_repository.h"
+#include "pch.h"
+
 #include "tachometer.h"
-#include "pwm_generator_logic.h"
 
 static SimplePwm tachControl("tach"); 
 static float tachFreq;  

firmware/controllers/gear_controller.cpp

@@ -1,5 +1,6 @@
+#include "pch.h"
+
 #include "gear_controller.h"
-#include "tunerstudio_outputs.h"
 
 void GearControllerBase::init(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
     INJECT_ENGINE_REFERENCE(&transmissionController);

firmware/controllers/limp_manager.cpp

@@ -1,6 +1,6 @@
+#include "pch.h"
+
 #include "limp_manager.h"
-#include "engine.h"
-#include "efilib.h"
 
 void LimpManager::updateState(int rpm, efitick_t nowNt) {
 	Clearable allowFuel = CONFIG(isInjectionEnabled);

firmware/controllers/lua/lua.cpp

@@ -1,7 +1,7 @@
+#include "pch.h"
 
 #include "rusefi_lua.h"
 #include "thread_controller.h"
-#include "perf_trace.h"
 #include "thread_priority.h"
 
 #if EFI_LUA
@@ -13,8 +13,6 @@
 
 #if EFI_PROD_CODE || EFI_SIMULATOR
 #include "ch.h"
-#include "engine.h"
-#include "tunerstudio_outputs.h"
 
 #define LUA_HEAP_SIZE 20000
 

firmware/controllers/lua/lua_hooks.cpp

@@ -1,16 +1,13 @@
+#include "pch.h"
+
 #include "lua.hpp"
 #include "lua_hooks.h"
 
-#include "engine.h"
 #include "loggingcentral.h"
-#include "sensor.h"
 #include "adc_inputs.h"
-#include "efilib.h"
-#include "tunerstudio_outputs.h"
 #include "fuel_math.h"
 #include "airmass.h"
 #include "lua_airmass.h"
-#include "pwm_generator_logic.h"
 #include "can_msg_tx.h"
 
 // Some functions lean on existing FSIO implementation

firmware/controllers/math/closed_loop_fuel.cpp

@@ -1,10 +1,7 @@
+#include "pch.h"
+
 #include "closed_loop_fuel.h"
 #include "closed_loop_fuel_cell.h"
-
-#include "engine.h"
-
-#include "sensor.h"
-#include "engine_math.h"
 #include "deadband.h"
 
 struct FuelingBank {

firmware/controllers/math/closed_loop_fuel_cell.cpp

@@ -1,7 +1,6 @@
+#include "pch.h"
+
 #include "closed_loop_fuel_cell.h"
-#include "engine.h"
-#include "engine_configuration_generated_structures.h"
-#include "sensor.h"
 
 constexpr float integrator_dt = FAST_CALLBACK_PERIOD_MS * 0.001f;
 

firmware/controllers/math/engine_math.cpp

@@ -19,14 +19,9 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
-#include "engine_math.h"
-#include "engine_configuration.h"
-#include "interpolation.h"
-#include "allsensors.h"
-#include "sensor.h"
+#include "pch.h"
+
 #include "event_registry.h"
-#include "efi_gpio.h"
 #include "fuel_math.h"
 #include "advance_map.h"
 

firmware/controllers/math/speed_density.cpp

@@ -7,15 +7,9 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
 #include "speed_density.h"
 #include "fuel_math.h"
-#include "interpolation.h"
-#include "engine.h"
-#include "engine_math.h"
-#include "perf_trace.h"
-#include "sensor.h"
-#include "map.h"
 
 #if defined(HAS_OS_ACCESS)
 #error "Unexpected OS ACCESS HERE"

firmware/controllers/persistent_store.cpp

@@ -21,12 +21,11 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
+#include "pch.h"
+
 #if !EFI_UNIT_TEST
 #include "sensor_chart.h"
-#include "engine_configuration.h"
 #include "trigger_central.h"
-#include "engine_controller.h"
 
 persistent_config_container_s persistentState CCM_OPTIONAL;
 

firmware/controllers/sensors/AemXSeriesLambda.cpp

@@ -1,13 +1,7 @@
-#include "global.h"
+#include "pch.h"
 
 #if EFI_CAN_SUPPORT
 #include "AemXSeriesLambda.h"
-#include "efilib.h"
-
-#if EFI_TUNER_STUDIO
-#include "tunerstudio_outputs.h"
-#include "engine.h"
-#endif
 
 AemXSeriesWideband::AemXSeriesWideband(uint8_t sensorIndex, SensorType type)
 	: CanSensorBase(

firmware/controllers/sensors/allsensors.cpp

@@ -7,9 +7,7 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "engine.h"
-#include "pin_repository.h"
-#include "allsensors.h"
+#include "pch.h"
 
 ButtonDebounce acDebounce("ac_switch");
 

firmware/controllers/sensors/ego.cpp

@@ -11,9 +11,9 @@
  * 3) CJ125 internal wideband controller is known to work with both 4.2 and 4.9
  *
  */
+#include "pch.h"
+
 #include "ego.h"
-#include "interpolation.h"
-#include "engine.h"
 #include "adc_inputs.h"
 #include "cyclic_buffer.h"
 

firmware/controllers/sensors/flex_sensor.cpp

@@ -1,4 +1,5 @@
-#include "engine.h"
+#include "pch.h"
+
 #include "digital_input_exti.h"
 #include "flex_sensor.h"
 

firmware/controllers/sensors/maf.cpp

@@ -1,6 +1,4 @@
-#include "global.h"
-#include "engine.h"
-#include "maf.h"
+#include "pch.h"
 
 static void fillTheRest(persistent_config_s *e, int i) {
 	/**

firmware/controllers/sensors/map.cpp

@@ -5,19 +5,13 @@
  *
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
-#include "global.h"
-#include "engine_configuration.h"
-#include "engine_math.h"
+#include "pch.h"
+
 #include "adc_inputs.h"
-#include "interpolation.h"
-#include "map.h"
-#include "engine_controller.h"
-#include "sensor.h"
 
 #if EFI_PROD_CODE
 #include "digital_input_icu.h"
 #include "digital_input_exti.h"
-#include "pin_repository.h"
 #endif
 
 #if EFI_ANALOG_SENSORS

firmware/controllers/sensors/sensor.cpp

@@ -1,6 +1,5 @@
-#include "global.h"
-#include "sensor.h"
-#include "efilib.h"
+#include "pch.h"
+
 #include "loggingcentral.h"
 
 static const char* const s_sensorNames[] = {

firmware/controllers/sensors/software_knock.cpp

@@ -1,7 +1,6 @@
-#include "global.h"
-#include "engine.h"
+#include "pch.h"
+
 #include "biquad.h"
-#include "perf_trace.h"
 #include "thread_controller.h"
 #include "knock_logic.h"
 #include "software_knock.h"

firmware/controllers/sensors/thermistors.cpp

@@ -10,10 +10,9 @@
  * http://en.wikipedia.org/wiki/Steinhart%E2%80%93Hart_equation
  */
 
-#include "global.h"
+#include "pch.h"
+
 #include "thermistors.h"
-#include "engine_configuration.h"
-#include "engine_math.h"
 
 void setDodgeSensor(ThermistorConf *thermistorConf, float pullup) {
 	thermistorConf->config = {-40, 30, 120, 336660, 7550, 390, pullup};

firmware/controllers/sensors/tps.cpp

@@ -1,12 +1,7 @@
 /**
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
-#include "engine.h"
-#include "tps.h"
-#include "sensor.h"
-#if EFI_PROD_CODE
-#include "settings.h"
-#endif /* EFI_PROD_CODE */
+#include "pch.h"
 
 void grabTPSIsClosed() {
 #if EFI_PROD_CODE

firmware/controllers/serial/serial_rx.cpp

@@ -7,15 +7,13 @@
  * @author Konstantin Smola, (c) 2020
  */
 
-#include "globalaccess.h"
+#include "pch.h"
 
 #if EFI_AUX_SERIAL
-#include "engine.h"
 #include "serial.h"
 #include "serial_hw.h"
 #include "serial_sensor.h"
 
-#include "allsensors.h"
 #include "vehicle_speed.h"
 #include "thread_priority.h"
 

firmware/controllers/serial/serial_sensor.cpp

@@ -6,11 +6,11 @@
  * @author Konstantin Smola, (c) 2020
  */
 
-#include "global.h"
+#include "pch.h"
+
 #if EFI_AUX_SERIAL
 #include "serial.h"
 #include "serial_sensor.h"
-#include "engine.h"
 
 #define NUM_INNOVATE_O2_SENSORS 1
 #define AFR_MULTIPLIER 147

firmware/controllers/settings.cpp

@@ -6,36 +6,26 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
-#include "engine_configuration.h"
-#include "engine_math.h"
+#include "pch.h"
 
 #if !EFI_UNIT_TEST
 #include "os_access.h"
-#include "settings.h"
 #include "eficonsole.h"
 #include "adc_inputs.h"
-#include "engine_controller.h"
 #include "thermistors.h"
 #include "adc_inputs.h"
-#include "interpolation.h"
-#include "map.h"
 #include "trigger_decoder.h"
 #include "console_io.h"
-#include "engine.h"
-#include "efi_gpio.h"
 #include "idle_thread.h"
 #include "allsensors.h"
 #include "alternator_controller.h"
 #include "trigger_emulator_algo.h"
-#include "sensor.h"
 
 #if EFI_PROD_CODE
 #include "vehicle_speed.h"
 #include "rtc_helper.h"
 #include "can_hw.h"
 #include "rusefi.h"
-#include "pin_repository.h"
 #include "hardware.h"
 #endif /* EFI_PROD_CODE */
 

firmware/controllers/simple_tcu.cpp

@@ -1,7 +1,6 @@
+#include "pch.h"
+
 #include "simple_tcu.h"
-#include "efi_gpio.h"
-#include "tunerstudio_outputs.h"
-#include "engine_configuration.h"
 
 void SimpleTransmissionController::init() {
     for (size_t i = 0; i < efi::size(CONFIG(tcu_solenoid)); i++) {

firmware/controllers/start_stop.cpp

@@ -1,5 +1,6 @@
+#include "pch.h"
+
 #include "start_stop.h"
-#include "engine.h"
 
 ButtonDebounce startStopButtonDebounce("start_button");
 

firmware/controllers/system/dc_motor.cpp

@@ -6,9 +6,9 @@
  * @author Matthew Kennedy
  */
 
+#include "pch.h"
+
 #include "dc_motor.h"
-#include "efi_gpio.h"
-#include "pwm_generator_logic.h"
 
 TwoPinDcMotor::TwoPinDcMotor(OutputPin& disablePin)
 	: m_disable(&disablePin)

firmware/controllers/system/efi_gpio.cpp

@@ -6,18 +6,10 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
-#include "engine.h"
-#include "efi_gpio.h"
+#include "pch.h"
+
 #include "os_access.h"
 #include "drivers/gpio/gpio_ext.h"
-#include "perf_trace.h"
-#include "engine_controller.h"
-
-#if EFI_GPIO_HARDWARE
-#include "pin_repository.h"
-#include "io_pins.h"
-#endif /* EFI_GPIO_HARDWARE */
 
 #if EFI_ELECTRONIC_THROTTLE_BODY
 #include "electronic_throttle.h"

firmware/controllers/system/timer/pwm_generator_logic.cpp

@@ -8,14 +8,11 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
 #include "os_access.h"
-#include "pwm_generator_logic.h"
-#include "perf_trace.h"
 
 #if EFI_PROD_CODE
 #include "mpu_util.h"
-#include "engine.h"
 #endif // EFI_PROD_CODE
 
 // 1% duty cycle

firmware/controllers/system/timer/signal_executor_sleep.cpp

@@ -22,16 +22,11 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
+#include "pch.h"
 #include "os_access.h"
 #include "scheduler.h"
 #include "main_trigger_callback.h"
 
-#if EFI_SIMULATOR
-// this is about debugging
-#include "efi_gpio.h"
-#endif /* EFI_SIMULATOR */
-
 #if EFI_PRINTF_FUEL_DETAILS
 bool printSchedulerDebug = true;
 #endif // EFI_PRINTF_FUEL_DETAILS

firmware/controllers/system/timer/single_timer_executor.cpp

@@ -20,19 +20,17 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
+
 #include "os_access.h"
 #include "single_timer_executor.h"
 #include "efitime.h"
-#include "perf_trace.h"
 
 #if EFI_SIGNAL_EXECUTOR_ONE_TIMER
 
 #include "microsecond_timer.h"
-#include "tunerstudio_outputs.h"
 #include "os_util.h"
 
-#include "engine.h"
 uint32_t hwSetTimerDuration;
 
 void globalTimerCallback() {

firmware/controllers/tcu.cpp

@@ -6,8 +6,9 @@
  * @author David Holdeman, (c) 2020
  */
 
+#include "pch.h"
+
 #include "tcu.h"
-#include "tunerstudio_outputs.h"
 
 void TransmissionControllerBase::update(gear_e gear) {
     setCurrentGear(gear);

firmware/controllers/trigger/decoders/trigger_mazda.cpp

@@ -18,8 +18,9 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "pch.h"
+
 #include "trigger_mazda.h"
-#include "error_handling.h"
 
 #define NB_CRANK_MAGIC 70
 

firmware/controllers/trigger/decoders/trigger_structure.cpp

@@ -19,9 +19,9 @@
  */
 
 
-#include "global.h"
+#include "pch.h"
+
 #include "os_access.h"
-#include "engine.h"
 #include "trigger_chrysler.h"
 #include "trigger_gm.h"
 #include "trigger_nissan.h"
@@ -41,9 +41,6 @@
 #include "sensor_chart.h"
 #endif /* EFI_SENSOR_CHART */
 
-#include "engine_configuration.h"
-		extern persistent_config_container_s persistentState;
-
 void event_trigger_position_s::setAngle(angle_t angle DECLARE_ENGINE_PARAMETER_SUFFIX) {
 	findTriggerPosition(&ENGINE(triggerCentral.triggerShape),
 			&ENGINE(triggerCentral.triggerFormDetails),

firmware/controllers/trigger/decoders/trigger_universal.cpp

@@ -5,8 +5,9 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
+#include "pch.h"
+
 #include "trigger_universal.h"
-#include "error_handling.h"
 
 /**
  * @see getCycleDuration

firmware/controllers/trigger/decoders/trigger_vw.cpp

@@ -5,9 +5,9 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
+#include "pch.h"
 #include "trigger_vw.h"
 #include "trigger_universal.h"
-#include "error_handling.h"
 
 void setSkodaFavorit(TriggerWaveform *s) {
 	s->initialize(FOUR_STROKE_CRANK_SENSOR);

firmware/controllers/trigger/trigger_central.cpp

@@ -6,36 +6,25 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
 #include "os_access.h"
 
 #include "trigger_central.h"
 #include "trigger_decoder.h"
 #include "main_trigger_callback.h"
-#include "engine_configuration.h"
 #include "listener_array.h"
-#include "pwm_generator_logic.h"
 #include "tooth_logger.h"
 #include "hip9011.h"
 #include "logic_analyzer.h"
 
-#include "settings.h"
-#include "engine_math.h"
 #include "local_version_holder.h"
 #include "trigger_simulator.h"
 #include "trigger_emulator_algo.h"
 
-#include "rpm_calculator.h"
 #include "tooth_logger.h"
-#include "perf_trace.h"
 #include "map_averaging.h"
 #include "main_trigger_callback.h"
 
-
-#if EFI_PROD_CODE
-#include "pin_repository.h"
-#endif /* EFI_PROD_CODE */
-
 #if EFI_TUNER_STUDIO
 #include "tunerstudio.h"
 #endif /* EFI_TUNER_STUDIO */

firmware/controllers/trigger/trigger_decoder.cpp

@@ -24,18 +24,15 @@
  * If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "global.h"
+#include "pch.h"
+
 #include "os_access.h"
 
 #include "obd_error_codes.h"
 #include "trigger_decoder.h"
 #include "cyclic_buffer.h"
-#include "efi_gpio.h"
-#include "engine.h"
-#include "engine_math.h"
 #include "trigger_central.h"
 #include "trigger_simulator.h"
-#include "perf_trace.h"
 
 #if EFI_SENSOR_CHART
 #include "sensor_chart.h"

firmware/controllers/trigger/trigger_emulator_algo.cpp

@@ -13,10 +13,8 @@
  * @date Mar 3, 2014
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
-#include "state_sequence.h"
-#include "global.h"
-#include "efi_gpio.h"
-#include "pin_repository.h"
+
+#include "pch.h"
 
 int getPreviousIndex(const int currentIndex, const int size) {
 	return (currentIndex + size - 1) % size;
@@ -32,13 +30,9 @@ bool needEvent(const int currentIndex, const int size, const MultiChannelStateSe
 
 #if EFI_EMULATE_POSITION_SENSORS
 
-#include "engine.h"
 #include "trigger_emulator_algo.h"
-#include "engine_configuration.h"
 #include "trigger_central.h"
 #include "trigger_simulator.h"
-#include "settings.h"
-#include "pwm_generator_logic.h"
 
 TriggerEmulatorHelper::TriggerEmulatorHelper() {
 }

firmware/controllers/trigger/trigger_simulator.cpp

@@ -5,8 +5,8 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
-#include "engine.h"
+#include "pch.h"
+
 #include "trigger_simulator.h"
 #include "trigger_emulator_algo.h"
 

firmware/development/perf_trace.cpp

@@ -7,9 +7,8 @@
  */
 
 
-#include "efifeatures.h"
-#include "perf_trace.h"
-#include "efitime.h"
+#include "pch.h"
+
 #include "os_util.h"
 
 #ifndef ENABLE_PERF_TRACE

firmware/hw_layer/digital_input/digital_input_exti.cpp

@@ -5,13 +5,10 @@
  * @author Andrey Belomutskiy, (c) 2012-2021
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if HAL_USE_PAL && EFI_PROD_CODE
 #include "digital_input_exti.h"
-#include "efi_gpio.h"
-#include "error_handling.h"
-#include "pin_repository.h"
 
 /**
  * EXTI is a funny thing: you can only use same pin on one port. For example, you can use

firmware/hw_layer/drivers/can/can_msg_tx.cpp

@@ -7,13 +7,12 @@
  * @author Matthew Kennedy, (c) 2012-2020
  */
 
-#include "efifeatures.h"
-#include "global.h"
+#include "pch.h"
+
 #include "can_msg_tx.h"
 
 #if EFI_CAN_SUPPORT
 #include "can.h"
-#include "engine_configuration.h"
 
 extern int canWriteOk;
 extern int canWriteNotOk;

firmware/hw_layer/drivers/i2c/i2c_bb.cpp

@@ -6,11 +6,9 @@
  * @author Matthew Kennedy, (c) 2020
  */
 
-#include "i2c_bb.h"
+#include "pch.h"
 
-#include "io_pins.h"
-#include "efi_gpio.h"
-#include "pin_repository.h"
+#include "i2c_bb.h"
 
 void BitbangI2c::sda_high() {
 #if EFI_PROD_CODE

firmware/hw_layer/io_pins.cpp

@@ -7,11 +7,7 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
-#include "io_pins.h"
-#include "efi_gpio.h"
-#include "engine.h"
-#include "pin_repository.h"
+#include "pch.h"
 
 #if EFI_PROD_CODE
 #include "os_access.h"

firmware/hw_layer/mc33816.cpp

@@ -14,19 +14,15 @@
  * @author Andrey Belomutskiy, (c) 2012-2020
  */
 
-#include "global.h"
+#include "pch.h"
 
 #if EFI_MC33816
 
 #include "mc33816.h"
 #include "mc33816_memory_map.h"
-#include "engine.h"
-#include "efi_gpio.h"
-#include "pin_repository.h"
 #include "hardware.h"
 #include "mc33816_data.h"
 #include "mpu_util.h"
-#include "allsensors.h"
 
 static bool isInitializaed = false;