diff --git a/firmware/tunerstudio/rusefi.ini b/firmware/tunerstudio/rusefi.ini
index ee8a0aef76..5939ec123b 100644
--- a/firmware/tunerstudio/rusefi.ini
+++ b/firmware/tunerstudio/rusefi.ini
@@ -42,7 +42,7 @@ enable2ndByteCanID = false
 
 ; see PAGE_0_SIZE in C source code    
 ; CONFIG_DEFINITION_START
-; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Oct 02 13:12:05 EDT 2016
+; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sat Oct 08 21:51:08 EDT 2016
 
 pageSize            = 16376
 page = 1
@@ -1164,7 +1164,7 @@ fileVersion = { 20160702 }
    debugIntField3Gauge = debugIntField3, "debug i3", "%",     0,   100,     0,    0,    100,  100,   0,   0
    speedToRpmRatioGauge = speedToRpmRatio, "speed2rpm", "",     0,   100,     0,    0,    100,  100,   4,   4
    warningCounterGauge = warningCounter, "warn", "",     0,   100,     0,    0,    100,  100,   0,   0
-   lastErrorCodeGauge = lastErrorCode, "error", "",     0,   100,     0,    0,    100,  100,   0,   0
+   lastErrorCodeGauge = lastErrorCode, "error", "",     0,   8000,     0,    0,    8000,  8000,   0,   0
    internalMcuTemperatureGauge = internalMcuTemperature, "internal temperature", "C",     0,   100,     0,    0,    100,  100,   0,   0
    vvtPositionGauge = vvtPosition, "VVT position", "deg",     0,   100,     0,    0,    720,  720,   0,   0
    
@@ -1495,8 +1495,8 @@ cmd_test_idle_valve          = "w\x00\x17\x00\x01"
 		field = "!ECU reboot needed to apply these settings"
 		field = "#Cam is primary if you have cam sensor"
 		field = "Primary input channel", 				triggerInputPins1
-	    field = "Secondary channel", 					triggerInputPins2
-	    field = "VVT input",							camInput
+	    field = "Secondary channel", 					triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
+	    field = "Cam Sync/VVT input",					camInput
 	    field = "VVT mode",								vvtMode, {trigger_type != 80}
 	    field = "VVT use rise front",					vvtCamSensorUseRise, {trigger_type != 80}
 	    field = "Trigger error LED",					triggerErrorPin
diff --git a/firmware/tunerstudio/rusefi.input b/firmware/tunerstudio/rusefi.input
index f324689525..46107155a7 100644
--- a/firmware/tunerstudio/rusefi.input
+++ b/firmware/tunerstudio/rusefi.input
@@ -1472,8 +1472,8 @@ cmd_test_idle_valve          = "w\x00\x17\x00\x01"
 		field = "!ECU reboot needed to apply these settings"
 		field = "#Cam is primary if you have cam sensor"
 		field = "Primary input channel", 				triggerInputPins1
-	    field = "Secondary channel", 					triggerInputPins2
-	    field = "VVT input",							camInput
+	    field = "Secondary channel", 					triggerInputPins2, { trigger_type != 0 && trigger_type != 8 && trigger_type != 9 && trigger_type != 18 && trigger_type != 20}
+	    field = "Cam Sync/VVT input",					camInput
 	    field = "VVT mode",								vvtMode, {trigger_type != 80}
 	    field = "VVT use rise front",					vvtCamSensorUseRise, {trigger_type != 80}
 	    field = "Trigger error LED",					triggerErrorPin