9bea1190a4
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/controllers/algo/engine_configuration.cpp
2020-09-07 15:55:43 -04:00
be0bbf3dc8
Hellen says merge #1772 misc #2
2020-09-07 15:53:26 -04:00
0e14e51179
reorder ADC channel index ( #1763 )
...
* change config
* correct logic
* clearing these no longer needed
* test expected this to be set
2020-09-06 18:25:26 -04:00
faea28e521
OBD-II default rate is 500kbps
2020-09-01 22:24:25 -04:00
6f6eb0f561
BCM
2020-08-29 14:29:34 -04:00
7a3b6387b5
BCM
2020-08-29 10:06:14 -04:00
f225e63544
Revert "removing a bit of dead code?"
...
This reverts commit b5ab6930
2020-08-25 15:50:50 -04:00
b5ab693083
removing a bit of dead code?
2020-08-25 15:19:37 -04:00
c53979a017
Configurable stoichiometric ratio ( #1710 )
...
* configurable stoich ratio
* afr table always in gas afr
* default
* typo
* use defined ratio
* do it in config too
* missed a spot
* oops wrong one
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-08-21 19:43:30 -04:00
553820ecc8
gimme my preset!
2020-08-19 20:40:10 -04:00
e936c2742c
self-stimulation RPM is wrong by 50% if switching from NA6 to NB2 configuration fix #1682
2020-08-08 17:00:14 -04:00
5925ca5125
trigger and VSS hw integrated testing #1668
2020-08-08 11:45:02 -04:00
80663b25a9
missed a spot
2020-08-03 12:22:41 -07:00
51804a4eb9
no more setFuelMap
2020-08-03 12:14:11 -07:00
2c653ad333
@andreika I believe this is no longer needed since all fields have TS metadata?
2020-08-02 15:34:47 -04:00
978fa20916
Merge remote-tracking branch 'upstream/master' into remove-plain-maf
2020-07-31 14:56:29 -07:00
1703152427
reducing code duplication?
2020-07-29 23:01:55 -04:00
cf4bfa8d91
NA6 progress
2020-07-29 21:38:34 -04:00
c7590aa8a4
NA6 progress
2020-07-29 15:51:01 -04:00
67e4fcb2a2
goodbye plain maf
2020-07-23 02:46:45 -07:00
29e3c71df4
https://rusefi.com/forum/viewtopic.php?p=37401#p37401
2020-07-10 14:19:51 -04:00
42541da76c
more on wipeString
2020-07-05 14:09:43 -04:00
9f3106db39
refactoring
2020-07-05 13:34:51 -04:00
015293ee43
wipe strings in configuration images
2020-07-05 11:16:07 -04:00
dec8aafa38
BUG? handleCrc32Check does not use 'offset' parameter #1429
2020-06-19 00:17:05 -04:00
7d8384d7fa
1 byte issue in TuneReadWriteTest fix #1512
2020-06-18 23:29:08 -04:00
fc5dd7d0c3
a few unneeded properties
2020-06-13 22:46:10 -04:00
1a645bda1a
unused parameter
2020-06-13 22:30:43 -04:00
d1a30f362c
tuneCrc16 - we use it to match logs to tunes
2020-06-04 20:43:52 -04:00
b11c5cd8c8
switch some firmware warnings to errors ( #1465 )
...
* warnings as errors
* throw instead of exit
* test massaging
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-23 10:46:28 -04:00
6b35e01f7d
code style
2020-05-22 18:07:19 -04:00
db2e6ec60f
HW test progress
2020-05-21 21:45:01 -04:00
82e788ef3a
MRE pre-sets
2020-05-21 20:44:14 -04:00
aac7712df5
test fixture progress
2020-05-21 18:36:32 -04:00
9dda1a21bc
Redundant tps ( #1427 )
...
* add redundant sensor
* add tests
* add configure, info printing
* tests
* tests
* partial hookup
* fix
* fix
* bad makefile merge
* use second TPS config
* update test
* update test
* sensor names
* set second pin by default
* fix auto cal
* auto cal both sensors
* add reconfigure of secondary sensors
* gobblin' up your ram
* slow down write a little bit
* put split in debug gauge
* s
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.local>
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-18 14:32:00 -04:00
c7fadd475f
configuration for secondary (redundant) TPS sensors ( #1419 )
...
* add new fields
* add tps 2 secondary
* sensible error detection limits
* UI mods
* grey out as appropriate
* defaults
* either it's unused or its not
2020-05-10 16:13:15 -04:00
fcbba66e89
rusEFI online engine crc
2020-05-09 22:43:39 -04:00
e9e95ec5f3
Merge remote-tracking branch 'origin/master'
2020-05-07 00:56:22 -04:00
016da58bbd
field useful for rusEFI online catalog
2020-05-07 00:55:59 -04:00
aa3bf51723
short term fuel trim: part 1 ( #1402 )
...
* add cell
* add stft cell tests
* add bit
* minimally generate
* config defaults
2020-05-06 21:00:40 -04:00
f456799310
reducing confusion?
2020-05-02 22:06:11 -04:00
f128b33694
General purpose PWM: implementation & tests ( #1366 )
...
* config
* significant digits
* renumber enum, no need for a "none"
* ui
* impl base
* error handle MAP
* init & update
* don't need arg
* don't lie about sensor
* fix test build
* test stub
* initialize
* null check
* fix clamping
* test output
* types & enums
* don't need param
* test getOutput
* fix
* output pin instead of brain pin
* default config
2020-04-26 14:06:28 -04:00
83cca6ec7a
allow overriding configuration ( #1341 )
...
* config overrides
* proteus too
* comment
* remove wno-error
* comment
2020-04-26 00:07:59 -04:00
474d5e64cf
Update chibios ( #1364 )
...
* Update ChibiOS
* Fix coexistance of ChibiOS and our flash drivers
* Add 'int' = internal prefix for all on-chip flash functions
This avoid conflict with ChibiOS functions available after
enabling HAL_USE_EFL
* Exclude ChibiOS flash driver from bootloader
* Makefile magic?
* Kinetis: fix build after ChibiOS update and switching to SMART_BUILD
* Bootloader now use SMART_BUILD too
2020-04-25 16:32:32 -04:00
a8f466c615
trigger emulator refactoring ( #1358 )
...
* trigger gen refactoring
* missed one
* fix makefile
* commentary
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-24 14:00:06 -04:00
1bad5f3047
don't store self stim in config ( #1356 )
...
* kill
* add bench test
* fix
2020-04-23 22:38:14 -04:00
d65a244fc7
unused config field ( #1314 )
2020-04-18 07:57:28 -04:00
044766ec70
New clt consumers part 1 ( #1301 )
...
* idle
* CLT test prep
* idle target
* header
* air interpolate
* ancient comment
* fuel cut
* fuel cut, idle tests
* cleanup
2020-04-15 09:48:17 -04:00
89474adb63
cj125 progress
2020-04-08 23:14:21 -04:00
81211219f2
CAN progress
2020-03-31 16:49:19 -04:00
6ff928a798
f4-slave
2020-03-29 22:10:13 -04:00
d52ec6a58f
refactoring + MAP broadcast consumption
2020-03-29 21:15:06 -04:00
a5d4d06868
Multispark implementation ( #1192 )
...
* multispark prototype
* only multispark if not cut
* typo
* do some reasonableish math
* consume cfg
* todo
* bad merge
* move math out of engine2.cpp
* engine state config
* consume generated
* use new
* hand generate
* doc, debugging
* debug channel names
* don't depend on rpmcalc
* safer, fix math
* tests
* default multispark config
* remove todo
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-26 01:49:36 -04:00
7ab0a9cd76
startStopDialog
2020-03-25 00:58:59 -04:00
96c79012f0
At least read all TPS inputs
2020-03-20 19:55:36 -04:00
a4b5570223
"rusefi CAN" config #1198
2020-03-19 09:22:16 -04:00
d047340725
v12
2020-03-12 00:16:32 -04:00
620088cdc1
v12
2020-03-11 20:48:09 -04:00
1892cfe6b7
logicAnalyzerMode was unused, removing for now
2020-03-08 09:14:49 -04:00
ce2ec3d544
TEST_33816
2020-02-25 21:35:21 -05:00
8647abd22b
Add single flag for omitting PnP configs ( #1157 )
...
* switch to single enable flag
* engine_configuration.cpp
2020-02-24 19:08:02 -05:00
84995652df
reviving FRANKENSO_QA_ENGINE
2020-02-18 17:53:56 -05:00
a00c1a5be9
Sensor reconfiguration while running ( #1131 )
...
* reconfigure sensors
* docs
* doc
2020-02-08 06:22:23 -03:00
52c710bb62
move flash addr in to mpu_util ( #1123 )
...
* move flash addr in to mpu_util
* this _may_ work
* don't use offsetof
* proper header + defines
2020-02-05 08:06:38 +05:30
d49e253bff
Some initial work at Launch/ALS
...
(cherry picked from commit 07b3a0632f6673ad57db5b2d6b8ad21674cf3509)
2020-02-02 12:17:06 -05:00
4b4e683957
Boost pr ( #1114 )
...
* boost control
* cleanup
* Delete rusefi_config.txt
* Add files via upload
* Delete rusefi_config.txt
* Add files via upload
* Update rusefi.input
* Update boost_control.cpp
2020-02-02 03:56:21 -05:00
6022838656
looking forward
2020-02-01 17:55:58 -05:00
b83a5310be
happy new year
2020-01-08 00:02:40 -05:00
6e881d53b7
improvements around weird engine types
2019-12-28 23:22:16 -05:00
b83816b9ef
laughable gdi progress
2019-12-26 22:30:12 -05:00
0d0298ac98
boring test mule stuff
2019-12-15 22:21:49 -05:00
9403b2a8fc
fixing build is my most favourite time!
2019-12-13 18:02:24 -05:00
af4f20551b
getting rid of boardConfiguration / binary compatible change
2019-12-11 17:48:55 -05:00
00840d99ec
copyArray helper ( #1048 )
...
* add functions
* uses
* use for proteus
* do it for warmup mult
* do it for cranking settings
* cleanup
2019-12-10 18:04:50 -05:00
c5cfd21a70
just a trivial massive rename: TriggerState > TriggerWaveform
2019-12-08 01:09:39 -05:00
9fdf74bc18
Base configuration for Proteus ( #1040 )
...
* cfg
* add enum value
* add ci
* actually build the board config
* this is pretty close
* proteus case
2019-12-02 23:54:40 -05:00
2eab39d3ff
auxFastSensor
2019-12-02 17:49:01 -05:00
b04166d173
that's how we can move all fields one by one from boardConfiguration to engineConfiguration
...
my approach is to move fields from the bottom of BC struct
2019-11-30 10:24:37 -05:00
1ab40aec35
one step backwards :)
2019-11-29 01:39:02 -05:00
316d7ab63b
steps towards dual ETB
2019-11-29 00:26:17 -05:00
784610c5c3
steps towards dual ETB
2019-11-29 00:23:15 -05:00
9a0b66791b
unregisterOutput() + isPinOrModeChanged() + Stepper::stepPin+enablePin + Kinetis fix ( #1029 )
...
* Fix isConfigurationChanged() for EFI_ACTIVE_CONFIGURATION_IN_FLASH
* unregisterOutput() -> unregisterOutputIfPinOrModeChanged()
* clutchUpPinMode for unregisterPin()
* Fix Kinetis: EFI_ACTIVE_CONFIGURATION_IN_FLASH & EFI_MAIN_RELAY_CONTROL
* Stepper: enablePin & stepPin with modes support
2019-11-25 00:02:53 -05:00
56ff75004b
consistency
2019-11-23 15:53:22 -05:00
9ee8616cb0
Use templated array references ( #1027 )
...
* update defs
* consumers, use default params
* setArrayValues in tests
* floats
* test fixing
2019-11-22 23:27:24 -05:00
67b434e43a
v12
2019-11-18 23:45:35 -05:00
c3b793fc55
prometheus cleanup
2019-11-15 00:01:03 -05:00
3530c68a18
M73
2019-11-14 23:58:04 -05:00
8525c48036
evil manual merge of https://github.com/DonaldBecker/rusefi
2019-11-06 18:26:50 -05:00
8f5895321c
refactoring
2019-11-05 23:17:44 -05:00
cc6381fe96
evil manual merge of https://github.com/DonaldBecker/rusefi
2019-11-05 20:07:55 -05:00
bab1744d1d
progress towards #961
2019-11-04 22:44:52 -05:00
d1afb9b183
moving setDefaultFrankensoConfiguration down is the way of righteousness
2019-11-03 21:29:12 -05:00
a2bee7f46b
moving setDefaultFrankensoConfiguration down is the way of righteousness
2019-11-03 19:36:56 -05:00
06b7524c1d
moving setDefaultFrankensoConfiguration down is the way of righteousness
2019-11-03 17:25:34 -05:00
9c94dd503e
moving setDefaultFrankensoConfiguration down is the way of righteousness
2019-11-03 17:17:43 -05:00
ee5ee1942c
Kinetis & TLE8888 compatibility & fixes... ( #991 )
...
* TLE8888: More compatibility & postTunerStudioState
* activeConfiguration & EFI_ACTIVE_CONFIGURATION_IN_FLASH fix
* Kinetis: jump_to_bootloader() impl.
* Kinetis: UART baudrate safety check
* Kinetis: OMG!..
2019-10-31 16:06:34 -04:00
4d095d4844
60/2 VW trigger has running issue on 19/10/19 snapshot fix #986
2019-10-30 20:51:20 -04:00
88348ebd09
refactoring: reducing code duplication
2019-10-21 23:47:40 -04:00
62577c47da
preparation for #961
...
more unified access to pre-calculated value
2019-10-10 08:25:58 -04:00
faa2a481ea
Simplify thermistor config ( #962 )
...
* simplify thermistor config
* fix test
2019-10-02 21:00:10 -04:00
rusefi
Matthew Kennedy
dron0gus
rusEfi
ola
andreika-git