* move f4 config files
* don't need this
* f7
* f7
* h7
* this was duplicated
* turn off smart build
* loader too
* update prometheus paths
* bootloader should include confdir
* fix the flash size while we're at it
* move chconf_common
* use wait
* normalize board.mk
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* remove EFI_ADC_TEMP_SENSOR
* implement
* comment
* s
* switch adc_inputs over
* header
* s
* I think aligned-on-stack should work ok
* num channels
* cache safety
* move adc init too
* don't compile that file for the h7
* cypress & kinetis
* ports
* guard against bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* move board.c
* set explicit cpu type for simulator
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* ChibiOS: add support for STM32F765
This chip is used on Subaru EG33 p'n'p RusEFI board from Dron_Gus
* drivers: gpio: mc33810: commulative update
- use BIT macro
- fix wake-up method
- fix order of arguments in _add function
* port: stm32f4/7: detectCanDevice check for enabled interfaces only
* ADC: fix internal array size
internalAdcIndexByHardwareIndex should be EFI_ADC_LAST_CHANNEL size
couse adc_channel_e is used as index
* status LEDs: support status LEDs that driven by low level
* LCD: check if settings are valid on each access
* Lada Kalina: remove duplicate code
All LCD pins are set to GPIO_UNASSIGNED in disableLCD()
* Remove duplicate code
* We still need to know when invalid gpio is used...
This reverts commit c17775231a.
* gpios: isBrainPinValid helper
* LCD HD44780: do not touch pins if DM_NONE or invalid gpio
* Fix isEnabled checks for GPS and Joystick
* LCD HD44780: writePad use this method wider
* ADC: remove ADC_TwoSamplingDelay*
1. it is related to double or triple interlived mode only
2. it should be writen to CCR register, not CR1
* ADC: use designated initializers
* hard pwm
* fix, comments
* PC6-9 and PD12-15
* PB6-9
* dynamic frequency
* f7 mcuconf
* format
* relocate to common, support variable frequency
* error handling
* oops
* fix test build
* noop kinetis
* better guards
* guard for bl
* guards don't work if they have typos
* more mapping
* oops
* don't use for slow pwm
* enable pwm
* guard properly
* save a little memory
* use less mem
* correct timers
* all your ram are belong to us
* update limit & comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* aux serial updates from last PR
* trying to guess
* wow that's old! also not working maybe?
* hiding diag code which was messing with GP2/GP3 i.e. TLE8888_PIN_22 TLE8888_PIN_23
* date
* Mc33 undervolt (#1421)
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* fixed {}
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: NOx-z <50815960+NOx-z@users.noreply.github.com>
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
Co-authored-by: kon <dev@triggerdevel>
* Update ChibiOS
* Fix coexistance of ChibiOS and our flash drivers
* Add 'int' = internal prefix for all on-chip flash functions
This avoid conflict with ChibiOS functions available after
enabling HAL_USE_EFL
* Exclude ChibiOS flash driver from bootloader
* Makefile magic?
* Kinetis: fix build after ChibiOS update and switching to SMART_BUILD
* Bootloader now use SMART_BUILD too
* this flag did nothing
* header dedupe
* mre fix again
* get all dependencies in mpu_util.h
* guard can/spi
* more dedupe
* pragma once
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
Matthew Kennedy
Andrey G
rusefillc
rusefi
kon