rusefi-full/firmware/hw_layer/mc33816.cpp

/*
 * @file mc33816.cpp
 *
 * The NXP MC33816 is a programmable gate driver IC for precision solenoid control applications.
 *
 *
 * Useful wires:
 * 5v, 3(3.3v), Gnd, 12v, VccIO(3v) SPI, DRVEN, RSTB
 *
 * For MC33816 vs PT2000 differences see
 * https://www.nxp.com/docs/en/application-note/AN5203.pdf
 *
 * @date May 3, 2019
 * @author Andrey Belomutskiy, (c) 2012-2020
 */

#include "pch.h"

#if EFI_MC33816

#include "hardware.h"
#include "mpu_util.h"

static SPIConfig spiCfg = { .circular = false,
		.end_cb = NULL,
		.ssport = NULL,
		.sspad = 0,
		.cr1 =
				SPI_CR1_16BIT_MODE |
				SPI_CR1_MSTR |
//SPI_CR1_BR_1 // 5MHz
		SPI_CR1_CPHA | SPI_CR1_BR_0 | SPI_CR1_BR_1 | SPI_CR1_BR_2 | SPI_CR1_SPE,
		.cr2 = SPI_CR2_SSOE};

class Pt2001 : public Pt2001Base {
public:
	void init();
	void initIfNeeded();

protected:
	void select() override {
		spiSelect(driver);
	}

	void deselect() override {
		spiUnselect(driver);
	}

	uint16_t sendRecv(uint16_t tx) override {
		return spiPolledExchange(driver, tx);
	}

	// Send `count` number of 16 bit words from `data`
	void sendLarge(const uint16_t* data, size_t count) override {
		spiSend(driver, count, data);
	}

	// GPIO reset and enable pins
	void setResetB(bool state) override {
		resetB.setValue(state);
	}

	void setDriveEN(bool state) override {
		driven.setValue(state);
	}

	// GPIO inputs for various pins we need
	bool readFlag0() const override {
		return efiReadPin(engineConfiguration->mc33816_flag0);
	}

	// Get battery voltage - only try to init chip when powered
	float getVbatt() const override {
		return Sensor::get(SensorType::BatteryVoltage).value_or(VBAT_FALLBACK_VALUE);
	}

	// CONFIGURATIONS: currents, timings, voltages
	float getBoostVoltage() const override {
		return engineConfiguration->mc33_hvolt;
	}

	// Currents in amps
	float getBoostCurrent() const override {
		return engineConfiguration->mc33_i_boost;
	}

	float getPeakCurrent() const override {
		return engineConfiguration->mc33_i_peak;
	}

	float getHoldCurrent() const override {
		return engineConfiguration->mc33_i_hold;
	}

	float getPumpPeakCurrent() const override {
		return engineConfiguration->mc33_hpfp_i_peak;
	}

	float getPumpHoldCurrent() const override {
		return engineConfiguration->mc33_hpfp_i_hold;
	}

	// Timings in microseconds
	uint16_t getTpeakOff() const override {
		return engineConfiguration->mc33_t_peak_off;
	}

	uint16_t getTpeakTot() const override {
		return engineConfiguration->mc33_t_peak_tot;
	}

	uint16_t getTbypass() const override {
		return engineConfiguration->mc33_t_bypass;
	}

	uint16_t getTholdOff() const override {
		return engineConfiguration->mc33_t_hold_off;
	}

	uint16_t getTHoldTot() const override {
		return engineConfiguration->mc33_t_hold_tot;
	}

	uint16_t getTBoostMin() const override {
		return engineConfiguration->mc33_t_min_boost;
	}

	uint16_t getTBoostMax() const override {
		return engineConfiguration->mc33_t_max_boost;
	}

	uint16_t getPumpTholdOff() const override {
		return engineConfiguration->mc33_hpfp_i_hold_off;
	}

	uint16_t getPumpTholdTot() const override {
		return engineConfiguration->mc33_hpfp_max_hold;
	}

	// Print out an error message
	void onError(const char* why) override {
		efiPrintf("PT2001 error: %s", why);
	}

	void sleepMs(size_t ms) override {
		chThdSleepMilliseconds(ms);
	}

private:
	SPIDriver* driver;

	OutputPin resetB;
	OutputPin driven;
	OutputPin chipSelect;
};

void Pt2001::init() {
	//
	// see setTest33816EngineConfiguration for default configuration
	// Pins
	if (!isBrainPinValid(engineConfiguration->mc33816_cs) ||
		!isBrainPinValid(engineConfiguration->mc33816_rstb) ||
		!isBrainPinValid(engineConfiguration->mc33816_driven)) {
		return;
	}
	if (isBrainPinValid(engineConfiguration->mc33816_flag0)) {
		efiSetPadMode("mc33816 flag0", engineConfiguration->mc33816_flag0, getInputMode(PI_DEFAULT));
	}

	chipSelect.initPin("mc33 CS", engineConfiguration->mc33816_cs /*, &engineConfiguration->csPinMode*/);

	// Initialize the chip via ResetB
	resetB.initPin("mc33 RESTB", engineConfiguration->mc33816_rstb);
	// High Voltage via DRIVEN
	driven.initPin("mc33 DRIVEN", engineConfiguration->mc33816_driven);

	spiCfg.ssport = getHwPort("hip", engineConfiguration->mc33816_cs);
	spiCfg.sspad = getHwPin("hip", engineConfiguration->mc33816_cs);

	// hard-coded for now, just resolve the conflict with SD card!
	engineConfiguration->mc33816spiDevice = SPI_DEVICE_3;

	driver = getSpiDevice(engineConfiguration->mc33816spiDevice);
	if (driver == NULL) {
		// error already reported
		return;
	}

	spiStart(driver, &spiCfg);

	// addConsoleAction("mc33_stats", showStats);
	// addConsoleAction("mc33_restart", mcRestart);

	initIfNeeded();
}

static bool isInitializaed = false;

void Pt2001::initIfNeeded() {
	if (Sensor::get(SensorType::BatteryVoltage).value_or(VBAT_FALLBACK_VALUE) < LOW_VBATT) {
		isInitializaed = false;
	} else {
		if (!isInitializaed) {
			isInitializaed = restart();
		}
	}
}

static Pt2001 pt;

void initMc33816() {
	pt.init();
}

#endif /* EFI_MC33816 */