53 lines
2.1 KiB
Makefile
53 lines
2.1 KiB
Makefile
# Combine the related files for a specific platform and MCU.
|
|
|
|
# Target ECU board design
|
|
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen81/board_configuration.cpp \
|
|
$(BOARDS_DIR)/hellen/hellen_common.cpp
|
|
BOARDINC = $(BOARDS_DIR)/hellen/hellen81
|
|
|
|
# Set this if you want a default engine type other than normal Hellen81
|
|
ifeq ($(DEFAULT_ENGINE_TYPE),)
|
|
DEFAULT_ENGINE_TYPE = -DDEFAULT_ENGINE_TYPE=MINIMAL_PINS
|
|
endif
|
|
|
|
ifeq ($(LED_CRITICAL_ERROR_BRAIN_PIN),)
|
|
LED_CRITICAL_ERROR_BRAIN_PIN = -DLED_CRITICAL_ERROR_BRAIN_PIN=GPIOH_8
|
|
endif
|
|
|
|
ifeq ($(LED_COMMUNICATION_BRAIN_PIN),)
|
|
LED_COMMUNICATION_BRAIN_PIN = -DEFI_COMMUNICATION_PIN=GPIOH_10
|
|
endif
|
|
|
|
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
|
|
|
|
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
|
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
|
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
|
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
|
|
|
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
|
|
DDEFS += -DTS_NO_PRIMARY -DTS_NO_SECONDARY
|
|
DDEFS += -DEFI_CAN_SERIAL=TRUE
|
|
# todo debug:
|
|
DDEFS += -DDISABLE_CAN_UPDATE_DASH=TRUE
|
|
|
|
# Add them all together
|
|
DDEFS += -DEFI_USE_OSC=TRUE -DFIRMWARE_ID=\"hellen81\" $(DEFAULT_ENGINE_TYPE) $(LED_CRITICAL_ERROR_BRAIN_PIN) $(LED_COMMUNICATION_BRAIN_PIN)
|
|
#DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
|
|
#DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE -DHAL_VSS_USE_PAL=TRUE
|
|
DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_ADC=TRUE -DHAL_VSS_USE_PAL=TRUE
|
|
# todo: is it broken?
|
|
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
|
|
|
|
TRIGGER_USE_ADC = yes
|
|
|
|
# we need fast ADC for software trigger detector
|
|
#DDEFS += -DEFI_OVERRIDE_FAST_ADC_FOR_STM32H7=TRUE -DADC_FAST_DEVICE=ADCD1 -DADC_SLOW_DEVICE=ADCD3 -DSTM32_ADC_USE_ADC3=TRUE
|
|
#DDEFS += -DADC_SLOW_DEVICE=ADCD3 -DSTM32_ADC_USE_ADC3=TRUE
|
|
|
|
DDEFS += -DEFI_OVERRIDE_FAST_ADC_FOR_STM32H7=TRUE -DADC_FAST_DEVICE=ADCD1 -DEFI_USE_ONLY_FAST_ADC=TRUE -DEFI_FASTER_UNIFORM_ADC=TRUE -DADC_MAX_CHANNELS_COUNT=16 -DADC_BUF_DEPTH_FAST=1 -DADC_BUF_NUM_AVG=1
|
|
#DDEFS += -DADC_SLOW_DEVICE=ADCD1
|
|
|
|
# We are running on Hellen-One hardware!
|
|
DDEFS += -DHW_HELLEN=1
|