Export USART3, UART5(TX only) and USB to connector (#155)
CAN moved from PA11, PA12 to PB8, PB9 PA11, PA12 used as USB DISP4,5,6 moved to PB13,14,15 LED_GREEN is moved to PB7 5V and GND signals are added to connector (around UART and USB) can be used in both directions: - power device on table - power some ext devices !!!!!PCB and Gerber were not updated!!!!!
This commit is contained in:
parent
666dcad646
commit
6d4fa3d6c6