add fuel/spark cut codes to TS indicators (#4592)

* add fuel/spark cut codes to TS indicators

* fix list

* only set clearReason if not cleared

firmware/console/binary/output_channels.txt

@@ -10,8 +10,6 @@
 struct_no_prefix output_channels_s
 
 bit sd_present
-bit isIgnitionEnabledIndicator;
-bit isInjectionEnabledIndicator;
 bit sd_logging_internal
 bit unusedb4;
 bit unusedb5;

firmware/console/status_loop.cpp

@@ -657,9 +657,6 @@ static void updateFlags() {
 	engine->outputChannels.isFanOn = enginePins.fanRelay.getLogicValue();
 	engine->outputChannels.isFan2On = enginePins.fanRelay2.getLogicValue();
 	engine->outputChannels.isO2HeaterOn = enginePins.o2heater.getLogicValue();
-	// todo: eliminate state copy logic by giving limpManager it's owm limp_manager.txt and leveraging LiveData
-	engine->outputChannels.isIgnitionEnabledIndicator = engine->limpManager.allowIgnition().value;
-	engine->outputChannels.isInjectionEnabledIndicator = engine->limpManager.allowInjection().value;
 	// todo: eliminate state copy logic by giving DfcoController it's owm xxx.txt and leveraging LiveData
 	engine->outputChannels.dfcoActive = engine->module<DfcoController>()->cutFuel();
 

firmware/controllers/engine_cycle/main_trigger_callback.cpp

@@ -226,6 +226,8 @@ static void handleFuel(uint32_t trgEventIndex, int rpm, efitick_t nowNt, float c
 	efiAssertVoid(CUSTOM_ERR_6628, trgEventIndex < getTriggerCentral()->engineCycleEventCount, "handleFuel/event index");
 
 	LimpState limitedFuelState = getLimpManager()->allowInjection();
+
+	// todo: eliminate state copy logic by giving limpManager it's owm limp_manager.txt and leveraging LiveData
 	engine->outputChannels.fuelCutReason = (int8_t)limitedFuelState.reason;
 	bool limitedFuel = !limitedFuelState.value;
 	if (limitedFuel) {

firmware/controllers/engine_cycle/spark_logic.cpp

@@ -434,6 +434,8 @@ void onTriggerEventSparkLogic(uint32_t trgEventIndex, int rpm, efitick_t edgeTim
 	}
 
 	LimpState limitedSparkState = engine->limpManager.allowIgnition();
+
+	// todo: eliminate state copy logic by giving limpManager it's owm limp_manager.txt and leveraging LiveData
 	engine->outputChannels.sparkCutReason = (int8_t)limitedSparkState.reason;
 	bool limitedSpark = !limitedSparkState.value;
 

firmware/controllers/limp_manager.h

@@ -4,6 +4,7 @@
 
 #include <cstdint>
 
+// Keep this list in sync with fuelIgnCutCodeList in rusefi.input!
 enum class ClearReason : uint8_t {
 	None, // 0
 	Fatal,
@@ -18,7 +19,9 @@ enum class ClearReason : uint8_t {
 	InjectorDutyCycle, // 10
 	FloodClear, // 11
 	EnginePhase, // 12
-	KickStart,
+	KickStart, // 13
+
+	// Keep this list in sync with fuelIgnCutCodeList in rusefi.input!
 };
 
 // Only allows clearing the value, but never resetting it.
@@ -32,8 +35,10 @@ public:
 	}
 
 	void clear(ClearReason clearReason) {
-		m_value = false;
-		this->clearReason = clearReason;
+		if (m_value) {
+			m_value = false;
+			this->clearReason = clearReason;
+		}
 	}
 
 	operator bool() const {

firmware/tunerstudio/rusefi.input

@@ -234,6 +234,8 @@ enable2ndByteCanID = false
 
 	wboFaultCodeList = bits, U08, [0:3], "OK", "Unk", "Unk", "failed to heat", "overheat", "underheat", "no supply"
 
+	fuelIgnCutCodeList = bits, U08, [0:7], "None", "fatal error", "setting disabled", "RPM limit", "fault RPM limit", "boost cut", "oil pressure", "stop requested", "ETB problem", "launch control", "max injector duty", "flood clear", "engine sync", "kickstart"
+
 [ConstantsExtensions]
      ; defaultValue is used to provide TunerStudio with a value to use in the case of
      ; the constant not yet being initialized. This is primarily important if the
@@ -1400,8 +1402,8 @@ gaugeCategory = GPPWM Outputs
    indicator =                   { isWarnNow },        "No warnings",           "Warning",  white,  black, yellow,  black
    indicator =                 { checkEngine },    "No Check Engine",      "Check Engine",  white,  black,    red,  black
    indicator =               { isTriggerError},         "Trigger OK",       "Trigger ERR",  white,  black,    red,  black
-   indicator =  { isIgnitionEnabledIndicator },       "Ignition cut",       "Ignition OK", yellow,  black,  white,  black
-   indicator = { isInjectionEnabledIndicator },      "Injection cut",      "Injection OK", yellow,  black,  white,  black
+   indicator = { fuelCutReason  != 0 }, "Injection OK", { Fuel cut: bitStringValue(fuelIgnCutCodeList, fuelCutReason)}, white, black, yellow, black
+   indicator = { sparkCutReason != 0 }, "Ignition OK",  { Ign cut: bitStringValue(fuelIgnCutCodeList, sparkCutReason)}, white, black, yellow, black
 
    ; this is required so that the "config error" feature works in TS
    ; DO NOT CHANGE THIS LINE - TS is looking for an indicator with particular text/styling
@@ -1416,7 +1418,6 @@ gaugeCategory = GPPWM Outputs
    indicator =                    { isFanOn },             "Fan off",            "Fan on",  white,  black,  green,  black
    indicator =                   { isFan2On },           "Fan 2 off",          "Fan 2 on",  white,  black,  green,  black
    indicator =              { isMainRelayOn },      "Main relay off",     "Main relay on",  white,  black,  green,  black
-   indicator =        { fuelCutReason == 11 },          "No cleanup",       "Cyl cleanup",  white,  black, yellow,  black
    ; Line 2
    ;         =                     expression,             off-label,            on-label, off-bg, off-fg,  on-bg,  on-fg
    indicator =               { isFuelPumpOn },       "Fuel pump off",      "Fuel pump on",  white,  black,  green,  black