mirror of https://github.com/rusefi/rusefi.git
Auto-generated configs and docs
This commit is contained in:
parent
f974df0da7
commit
4589f81a7d
|
@ -408,7 +408,7 @@
|
|||
#define GAUGE_CATEGORY_ETB "ETB more"
|
||||
#define GAUGE_CATEGORY_FUEL_MATH "Fuel: math"
|
||||
#define GAUGE_CATEGORY_TIMING "Timing"
|
||||
#define GAUGE_COIL_DWELL_TIME "dwell: coil charge time"
|
||||
#define GAUGE_COIL_DWELL_TIME "Ignition: coil charge time"
|
||||
#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll"
|
||||
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
|
||||
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
|
||||
|
@ -446,7 +446,7 @@
|
|||
#define GAUGE_NAME_DEBUG_I5 "debug i5"
|
||||
#define GAUGE_NAME_DESIRED_GEAR "Desired Gear"
|
||||
#define GAUGE_NAME_DETECTED_GEAR "Detected Gear"
|
||||
#define GAUGE_NAME_DWELL_DUTY "dwell: coil duty cycle"
|
||||
#define GAUGE_NAME_DWELL_DUTY "Ignition: coil duty cycle"
|
||||
#define GAUGE_NAME_ECU_TEMPERATURE "ECU temperature"
|
||||
#define GAUGE_NAME_ENGINE_CRC16 "Engine CRC16"
|
||||
#define GAUGE_NAME_ETB_DUTY "ETB Duty"
|
||||
|
@ -483,7 +483,7 @@
|
|||
#define GAUGE_NAME_IAC "Idle Air Valve"
|
||||
#define GAUGE_NAME_IAT "IAT"
|
||||
#define GAUGE_NAME_IDLE_POSITION "Idle position sensor"
|
||||
#define GAUGE_NAME_IGNITION_LOAD "ign: load"
|
||||
#define GAUGE_NAME_IGNITION_LOAD "Ignition: load"
|
||||
#define GAUGE_NAME_INJECTOR_LAG "fuel: injector lag"
|
||||
#define GAUGE_NAME_ISS "Input Shaft Speed"
|
||||
#define GAUGE_NAME_KNOCK_1 "knock 1"
|
||||
|
@ -1060,7 +1060,7 @@
|
|||
#define SentEtbType_NONE 0
|
||||
#define show_Frankenso_presets true
|
||||
#define show_test_presets true
|
||||
#define SIGNATURE_HASH 2022377892
|
||||
#define SIGNATURE_HASH 4142870812
|
||||
#define specs_s_size 12
|
||||
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
|
||||
#define spi_device_e_SPI_DEVICE_1 1
|
||||
|
@ -1349,7 +1349,7 @@
|
|||
#define ts_show_vbatt true
|
||||
#define ts_show_vr_threshold_2 true
|
||||
#define ts_show_vr_threshold_all true
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.cypress.2022377892"
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.cypress.4142870812"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't'
|
||||
|
|
|
@ -408,7 +408,7 @@
|
|||
#define GAUGE_CATEGORY_ETB "ETB more"
|
||||
#define GAUGE_CATEGORY_FUEL_MATH "Fuel: math"
|
||||
#define GAUGE_CATEGORY_TIMING "Timing"
|
||||
#define GAUGE_COIL_DWELL_TIME "dwell: coil charge time"
|
||||
#define GAUGE_COIL_DWELL_TIME "Ignition: coil charge time"
|
||||
#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll"
|
||||
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
|
||||
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
|
||||
|
@ -446,7 +446,7 @@
|
|||
#define GAUGE_NAME_DEBUG_I5 "debug i5"
|
||||
#define GAUGE_NAME_DESIRED_GEAR "Desired Gear"
|
||||
#define GAUGE_NAME_DETECTED_GEAR "Detected Gear"
|
||||
#define GAUGE_NAME_DWELL_DUTY "dwell: coil duty cycle"
|
||||
#define GAUGE_NAME_DWELL_DUTY "Ignition: coil duty cycle"
|
||||
#define GAUGE_NAME_ECU_TEMPERATURE "ECU temperature"
|
||||
#define GAUGE_NAME_ENGINE_CRC16 "Engine CRC16"
|
||||
#define GAUGE_NAME_ETB_DUTY "ETB Duty"
|
||||
|
@ -483,7 +483,7 @@
|
|||
#define GAUGE_NAME_IAC "Idle Air Valve"
|
||||
#define GAUGE_NAME_IAT "IAT"
|
||||
#define GAUGE_NAME_IDLE_POSITION "Idle position sensor"
|
||||
#define GAUGE_NAME_IGNITION_LOAD "ign: load"
|
||||
#define GAUGE_NAME_IGNITION_LOAD "Ignition: load"
|
||||
#define GAUGE_NAME_INJECTOR_LAG "fuel: injector lag"
|
||||
#define GAUGE_NAME_ISS "Input Shaft Speed"
|
||||
#define GAUGE_NAME_KNOCK_1 "knock 1"
|
||||
|
@ -1060,7 +1060,7 @@
|
|||
#define SentEtbType_NONE 0
|
||||
#define show_Frankenso_presets true
|
||||
#define show_test_presets true
|
||||
#define SIGNATURE_HASH 274508648
|
||||
#define SIGNATURE_HASH 2654507984
|
||||
#define specs_s_size 12
|
||||
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
|
||||
#define spi_device_e_SPI_DEVICE_1 1
|
||||
|
@ -1349,7 +1349,7 @@
|
|||
#define ts_show_vbatt true
|
||||
#define ts_show_vr_threshold_2 true
|
||||
#define ts_show_vr_threshold_all true
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.kin.274508648"
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.kin.2654507984"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't'
|
||||
|
|
|
@ -402,7 +402,7 @@
|
|||
#define GAUGE_CATEGORY_ETB "ETB more"
|
||||
#define GAUGE_CATEGORY_FUEL_MATH "Fuel: math"
|
||||
#define GAUGE_CATEGORY_TIMING "Timing"
|
||||
#define GAUGE_COIL_DWELL_TIME "dwell: coil charge time"
|
||||
#define GAUGE_COIL_DWELL_TIME "Ignition: coil charge time"
|
||||
#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll"
|
||||
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
|
||||
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
|
||||
|
@ -440,7 +440,7 @@
|
|||
#define GAUGE_NAME_DEBUG_I5 "debug i5"
|
||||
#define GAUGE_NAME_DESIRED_GEAR "Desired Gear"
|
||||
#define GAUGE_NAME_DETECTED_GEAR "Detected Gear"
|
||||
#define GAUGE_NAME_DWELL_DUTY "dwell: coil duty cycle"
|
||||
#define GAUGE_NAME_DWELL_DUTY "Ignition: coil duty cycle"
|
||||
#define GAUGE_NAME_ECU_TEMPERATURE "ECU temperature"
|
||||
#define GAUGE_NAME_ENGINE_CRC16 "Engine CRC16"
|
||||
#define GAUGE_NAME_ETB_DUTY "ETB Duty"
|
||||
|
@ -477,7 +477,7 @@
|
|||
#define GAUGE_NAME_IAC "Idle Air Valve"
|
||||
#define GAUGE_NAME_IAT "IAT"
|
||||
#define GAUGE_NAME_IDLE_POSITION "Idle position sensor"
|
||||
#define GAUGE_NAME_IGNITION_LOAD "ign: load"
|
||||
#define GAUGE_NAME_IGNITION_LOAD "Ignition: load"
|
||||
#define GAUGE_NAME_INJECTOR_LAG "fuel: injector lag"
|
||||
#define GAUGE_NAME_ISS "Input Shaft Speed"
|
||||
#define GAUGE_NAME_KNOCK_1 "knock 1"
|
||||
|
@ -1010,7 +1010,7 @@
|
|||
#define show_Frankenso_presets false
|
||||
#define show_Proteus_presets false
|
||||
#define show_test_presets false
|
||||
#define SIGNATURE_HASH 190208777
|
||||
#define SIGNATURE_HASH 2234672049
|
||||
#define specs_s_size 12
|
||||
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
|
||||
#define spi_device_e_SPI_DEVICE_1 1
|
||||
|
@ -1300,7 +1300,7 @@
|
|||
#define ts_show_vbatt true
|
||||
#define ts_show_vr_threshold_2 true
|
||||
#define ts_show_vr_threshold_all true
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.subaru_eg33_f7.190208777"
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.subaru_eg33_f7.2234672049"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't'
|
||||
|
|
|
@ -61,7 +61,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -326,15 +326,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -451,7 +451,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -4,14 +4,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
|
|
@ -39,7 +39,7 @@ canReadCounter("canReadCounter", SensorCategory.SENSOR_INPUTS, FieldType.INT16,
|
|||
tpsAccelFuel("fuel: TPS acceleration add fuel ms", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 74, 0.0033333333333333335, 0.0, 0.0, "ms"),
|
||||
ignitionAdvance("timing", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 76, 0.02, 0.0, 0.0, "deg"),
|
||||
unusedDwellWasHere("unusedDwellWasHere", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 78, 1.0, -1.0, -1.0, ""),
|
||||
coilDutyCycle("dwell: coil duty cycle", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 80, 0.01, 0.0, 0.0, "%"),
|
||||
coilDutyCycle("Ignition: coil duty cycle", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 80, 0.01, 0.0, 0.0, "%"),
|
||||
idleAirValvePosition("Idle Air Valve", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 82, 0.01, 0.0, 0.0, "%"),
|
||||
etbTarget("ETB Target", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 84, 0.01, 0.0, 0.0, "%"),
|
||||
etb1DutyCycle("ETB Duty", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 86, 0.01, 0.0, 0.0, "%"),
|
||||
|
@ -385,16 +385,16 @@ targetAFR("fuel: target AFR", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 812
|
|||
stoichiometricRatio("fuel: stoich ratio", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 814, 0.001, 0.0, 0.0, "ratio"),
|
||||
sdTcharge_coff("sdTcharge_coff", SensorCategory.SENSOR_INPUTS, FieldType.INT, 816, 1.0, -1.0, -1.0, ""),
|
||||
sdAirMassInOneCylinder("SD cylinder mass\nSpeed-density logic: calculated air mass in one cylinder, in grams", SensorCategory.SENSOR_INPUTS, FieldType.INT, 820, 1.0, -1.0, -1.0, ""),
|
||||
baseDwell("baseDwell", SensorCategory.SENSOR_INPUTS, FieldType.INT, 828, 1.0, 0.0, 30.0, "ms"),
|
||||
sparkDwell("dwell: coil charge time", SensorCategory.SENSOR_INPUTS, FieldType.INT, 832, 1.0, 0.0, 30.0, "ms"),
|
||||
dwellAngle("ignition dwell duration\nas crankshaft angle\nNAN if engine is stopped\nSee also sparkDwell", SensorCategory.SENSOR_INPUTS, FieldType.INT, 836, 1.0, 0.0, 120.0, "deg"),
|
||||
cltTimingCorrection("cltTimingCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 840, 0.01, -20.0, 20.0, "deg"),
|
||||
timingIatCorrection("timingIatCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 842, 0.01, -20.0, 20.0, "deg"),
|
||||
timingPidCorrection("timingPidCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 844, 0.01, -20.0, 20.0, "deg"),
|
||||
baseDwell("Ignition: base dwell", SensorCategory.SENSOR_INPUTS, FieldType.INT, 828, 1.0, 0.0, 30.0, "ms"),
|
||||
sparkDwell("Ignition: coil charge time", SensorCategory.SENSOR_INPUTS, FieldType.INT, 832, 1.0, 0.0, 30.0, "ms"),
|
||||
dwellAngle("Ignition: dwell duration\nas crankshaft angle\nNAN if engine is stopped\nSee also sparkDwell", SensorCategory.SENSOR_INPUTS, FieldType.INT, 836, 1.0, 0.0, 120.0, "deg"),
|
||||
cltTimingCorrection("Ignition: CLT correction", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 840, 0.01, -20.0, 20.0, "deg"),
|
||||
timingIatCorrection("Ignition: IAT correction", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 842, 0.01, -20.0, 20.0, "deg"),
|
||||
timingPidCorrection("Ignition: PID correction", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 844, 0.01, -20.0, 20.0, "deg"),
|
||||
alignmentFill_at_18("need 4 byte alignment", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 846, 1.0, -20.0, 100.0, "units"),
|
||||
dwellVoltageCorrection("dwellVoltageCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT, 848, 1.0, -1.0, -1.0, ""),
|
||||
luaTimingAdd("luaTimingAdd", SensorCategory.SENSOR_INPUTS, FieldType.INT, 852, 1.0, -20.0, 20.0, "deg"),
|
||||
luaTimingMult("luaTimingMult", SensorCategory.SENSOR_INPUTS, FieldType.INT, 856, 1.0, -20.0, 20.0, "deg"),
|
||||
dwellVoltageCorrection("Ignition: dwell corr", SensorCategory.SENSOR_INPUTS, FieldType.INT, 848, 1.0, -1.0, -1.0, ""),
|
||||
luaTimingAdd("Ignition: Lua add", SensorCategory.SENSOR_INPUTS, FieldType.INT, 852, 1.0, -20.0, 20.0, "deg"),
|
||||
luaTimingMult("Ignition: Lua mult", SensorCategory.SENSOR_INPUTS, FieldType.INT, 856, 1.0, -20.0, 20.0, "deg"),
|
||||
m_knockRetard("Knock Degrees retarded\nlarger number = more retard", SensorCategory.SENSOR_INPUTS, FieldType.INT, 860, 1.0, -1.0, -1.0, ""),
|
||||
m_knockThreshold("m_knockThreshold", SensorCategory.SENSOR_INPUTS, FieldType.INT, 864, 1.0, -1.0, -1.0, ""),
|
||||
m_knockCount("m_knockCount", SensorCategory.SENSOR_INPUTS, FieldType.INT, 868, 1.0, -1.0, -1.0, ""),
|
||||
|
@ -442,7 +442,7 @@ alignmentFill_at_98("need 4 byte alignment", SensorCategory.SENSOR_INPUTS, Field
|
|||
fuelInjectionCounter("fuelInjectionCounter", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1080, 1.0, -1.0, -1.0, ""),
|
||||
sparkCounter("sparkCounter", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1084, 1.0, -1.0, -1.0, ""),
|
||||
fuelingLoad("fuel: load", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1088, 1.0, -1.0, -1.0, ""),
|
||||
ignitionLoad("ign: load", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1092, 1.0, -1.0, -1.0, ""),
|
||||
ignitionLoad("Ignition: load", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1092, 1.0, -1.0, -1.0, ""),
|
||||
veTableYAxis("veTableYAxis", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 1096, 0.01, 0.0, 0.0, "%"),
|
||||
alignmentFill_at_118("need 4 byte alignment", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 1098, 1.0, -20.0, 100.0, "units"),
|
||||
tpsFrom("tpsFrom", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1100, 1.0, -1.0, -1.0, ""),
|
||||
|
|
|
@ -40,7 +40,7 @@ static constexpr LogField fields[] = {
|
|||
{engine->outputChannels.canReadCounter, "canReadCounter", "", 0},
|
||||
{engine->outputChannels.tpsAccelFuel, "fuel: TPS acceleration add fuel ms", "ms", 3},
|
||||
{engine->outputChannels.ignitionAdvance, "timing", "deg", 1},
|
||||
{engine->outputChannels.coilDutyCycle, "dwell: coil duty cycle", "%", 0},
|
||||
{engine->outputChannels.coilDutyCycle, "Ignition: coil duty cycle", "%", 0},
|
||||
{engine->outputChannels.idleAirValvePosition, "Idle Air Valve", "%", 1},
|
||||
{engine->outputChannels.etbTarget, "ETB Target", "%", 2},
|
||||
{engine->outputChannels.etb1DutyCycle, "ETB Duty", "%", 1},
|
||||
|
@ -273,15 +273,15 @@ static constexpr LogField fields[] = {
|
|||
{engine->fuelComputer.stoichiometricRatio, "fuel: stoich ratio", "ratio", 2},
|
||||
{engine->fuelComputer.sdTcharge_coff, "sdTcharge_coff", "", 0},
|
||||
{engine->fuelComputer.sdAirMassInOneCylinder, "SD cylinder mass", "", 0},
|
||||
{engine->ignitionState.baseDwell, "baseDwell", "ms", 1, "Timing"},
|
||||
{engine->ignitionState.sparkDwell, "dwell: coil charge time", "ms", 1, "Timing"},
|
||||
{engine->ignitionState.dwellAngle, "ignition dwell duration", "deg", 1, "Timing"},
|
||||
{engine->ignitionState.cltTimingCorrection, "cltTimingCorrection", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.timingIatCorrection, "timingIatCorrection", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.timingPidCorrection, "timingPidCorrection", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.dwellVoltageCorrection, "dwellVoltageCorrection", "", 0},
|
||||
{engine->ignitionState.luaTimingAdd, "luaTimingAdd", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.luaTimingMult, "luaTimingMult", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.baseDwell, "Ignition: base dwell", "ms", 1, "Timing"},
|
||||
{engine->ignitionState.sparkDwell, "Ignition: coil charge time", "ms", 1, "Timing"},
|
||||
{engine->ignitionState.dwellAngle, "Ignition: dwell duration", "deg", 1, "Timing"},
|
||||
{engine->ignitionState.cltTimingCorrection, "Ignition: CLT correction", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.timingIatCorrection, "Ignition: IAT correction", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.timingPidCorrection, "Ignition: PID correction", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.dwellVoltageCorrection, "Ignition: dwell corr", "", 0},
|
||||
{engine->ignitionState.luaTimingAdd, "Ignition: Lua add", "deg", 2, "Timing"},
|
||||
{engine->ignitionState.luaTimingMult, "Ignition: Lua mult", "deg", 2, "Timing"},
|
||||
{engine->boostController.luaTargetAdd, "Boost: Lua Target Add", "v", 1, "Boost Control"},
|
||||
{engine->boostController.boostOutput, "Boost: Output", "percent", 2, "Boost Control"},
|
||||
{engine->boostController.luaTargetMult, "Boost: Lua Target Mult", "v", 1, "Boost Control"},
|
||||
|
@ -315,7 +315,7 @@ static constexpr LogField fields[] = {
|
|||
{engine->engineState.fuelInjectionCounter, "fuelInjectionCounter", "", 0},
|
||||
{engine->engineState.sparkCounter, "sparkCounter", "", 0},
|
||||
{engine->engineState.fuelingLoad, "fuel: load", "", 0},
|
||||
{engine->engineState.ignitionLoad, "ign: load", "", 0},
|
||||
{engine->engineState.ignitionLoad, "Ignition: load", "", 0},
|
||||
{engine->engineState.veTableYAxis, "veTableYAxis", "%", 0},
|
||||
{engine->triggerCentral.hwEventCounters[0], "Hardware events since boot 1", "", 0},
|
||||
{engine->triggerCentral.hwEventCounters[1], "Hardware events since boot 2", "", 0},
|
||||
|
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/ignition_state.txt Mon Jan 16 20:22:12 UTC 2023
|
||||
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/ignition_state.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
@ -6,6 +6,7 @@
|
|||
// start of ignition_state_s
|
||||
struct ignition_state_s {
|
||||
/**
|
||||
* "Ignition: base dwell"
|
||||
ms
|
||||
* offset 0
|
||||
*/
|
||||
|
@ -17,7 +18,7 @@ struct ignition_state_s {
|
|||
*/
|
||||
floatms_t sparkDwell = (floatms_t)0;
|
||||
/**
|
||||
* ignition dwell duration
|
||||
* Ignition: dwell duration
|
||||
* as crankshaft angle
|
||||
* NAN if engine is stopped
|
||||
* See also sparkDwell
|
||||
|
@ -26,16 +27,19 @@ struct ignition_state_s {
|
|||
*/
|
||||
angle_t dwellAngle = (angle_t)0;
|
||||
/**
|
||||
* "Ignition: CLT correction"
|
||||
deg
|
||||
* offset 12
|
||||
*/
|
||||
scaled_channel<int16_t, 100, 1> cltTimingCorrection = (int16_t)0;
|
||||
/**
|
||||
* "Ignition: IAT correction"
|
||||
deg
|
||||
* offset 14
|
||||
*/
|
||||
scaled_channel<int16_t, 100, 1> timingIatCorrection = (int16_t)0;
|
||||
/**
|
||||
* "Ignition: PID correction"
|
||||
deg
|
||||
* offset 16
|
||||
*/
|
||||
|
@ -47,15 +51,18 @@ struct ignition_state_s {
|
|||
*/
|
||||
uint8_t alignmentFill_at_18[2];
|
||||
/**
|
||||
* "Ignition: dwell corr"
|
||||
* offset 20
|
||||
*/
|
||||
float dwellVoltageCorrection = (float)0;
|
||||
/**
|
||||
* "Ignition: Lua add"
|
||||
deg
|
||||
* offset 24
|
||||
*/
|
||||
float luaTimingAdd = (float)0;
|
||||
/**
|
||||
* "Ignition: Lua mult"
|
||||
deg
|
||||
* offset 28
|
||||
*/
|
||||
|
@ -64,4 +71,4 @@ struct ignition_state_s {
|
|||
static_assert(sizeof(ignition_state_s) == 32);
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/ignition_state.txt Mon Jan 16 20:22:12 UTC 2023
|
||||
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/ignition_state.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
|
|
@ -408,7 +408,7 @@
|
|||
#define GAUGE_CATEGORY_ETB "ETB more"
|
||||
#define GAUGE_CATEGORY_FUEL_MATH "Fuel: math"
|
||||
#define GAUGE_CATEGORY_TIMING "Timing"
|
||||
#define GAUGE_COIL_DWELL_TIME "dwell: coil charge time"
|
||||
#define GAUGE_COIL_DWELL_TIME "Ignition: coil charge time"
|
||||
#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll"
|
||||
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
|
||||
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
|
||||
|
@ -446,7 +446,7 @@
|
|||
#define GAUGE_NAME_DEBUG_I5 "debug i5"
|
||||
#define GAUGE_NAME_DESIRED_GEAR "Desired Gear"
|
||||
#define GAUGE_NAME_DETECTED_GEAR "Detected Gear"
|
||||
#define GAUGE_NAME_DWELL_DUTY "dwell: coil duty cycle"
|
||||
#define GAUGE_NAME_DWELL_DUTY "Ignition: coil duty cycle"
|
||||
#define GAUGE_NAME_ECU_TEMPERATURE "ECU temperature"
|
||||
#define GAUGE_NAME_ENGINE_CRC16 "Engine CRC16"
|
||||
#define GAUGE_NAME_ETB_DUTY "ETB Duty"
|
||||
|
@ -483,7 +483,7 @@
|
|||
#define GAUGE_NAME_IAC "Idle Air Valve"
|
||||
#define GAUGE_NAME_IAT "IAT"
|
||||
#define GAUGE_NAME_IDLE_POSITION "Idle position sensor"
|
||||
#define GAUGE_NAME_IGNITION_LOAD "ign: load"
|
||||
#define GAUGE_NAME_IGNITION_LOAD "Ignition: load"
|
||||
#define GAUGE_NAME_INJECTOR_LAG "fuel: injector lag"
|
||||
#define GAUGE_NAME_ISS "Input Shaft Speed"
|
||||
#define GAUGE_NAME_KNOCK_1 "knock 1"
|
||||
|
@ -1060,7 +1060,7 @@
|
|||
#define SentEtbType_NONE 0
|
||||
#define show_Frankenso_presets true
|
||||
#define show_test_presets true
|
||||
#define SIGNATURE_HASH 281286402
|
||||
#define SIGNATURE_HASH 2661298106
|
||||
#define specs_s_size 12
|
||||
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
|
||||
#define spi_device_e_SPI_DEVICE_1 1
|
||||
|
@ -1349,7 +1349,7 @@
|
|||
#define ts_show_vbatt true
|
||||
#define ts_show_vr_threshold_2 true
|
||||
#define ts_show_vr_threshold_all true
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.f407-discovery.281286402"
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.f407-discovery.2661298106"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't'
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 3620637380
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.48way.3620637380"
|
||||
#define SIGNATURE_HASH 1504359036
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.48way.1504359036"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 616239127
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.alphax-2chan.616239127"
|
||||
#define SIGNATURE_HASH 2866751663
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.alphax-2chan.2866751663"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2279783457
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.alphax-4chan.2279783457"
|
||||
#define SIGNATURE_HASH 159810713
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.alphax-4chan.159810713"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 744088509
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.alphax-8chan.744088509"
|
||||
#define SIGNATURE_HASH 2721962757
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.alphax-8chan.2721962757"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1682046083
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.atlas.1682046083"
|
||||
#define SIGNATURE_HASH 3928343611
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.atlas.3928343611"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2872250312
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.core8.2872250312"
|
||||
#define SIGNATURE_HASH 626472816
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.core8.626472816"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2022377892
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.cypress.2022377892"
|
||||
#define SIGNATURE_HASH 4142870812
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.cypress.4142870812"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 281286402
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.f407-discovery.281286402"
|
||||
#define SIGNATURE_HASH 2661298106
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.f407-discovery.2661298106"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2022377892
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.f429-discovery.2022377892"
|
||||
#define SIGNATURE_HASH 4142870812
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.f429-discovery.4142870812"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1524230510
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.frankenso_na6.1524230510"
|
||||
#define SIGNATURE_HASH 3569209814
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.frankenso_na6.3569209814"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1602403564
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.harley81.1602403564"
|
||||
#define SIGNATURE_HASH 3521545300
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.harley81.3521545300"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 601870438
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen-gm-e67.601870438"
|
||||
#define SIGNATURE_HASH 2914773214
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen-gm-e67.2914773214"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 4252383189
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen-honda-k.4252383189"
|
||||
#define SIGNATURE_HASH 1930563437
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen-honda-k.1930563437"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2456590629
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen-nb1.2456590629"
|
||||
#define SIGNATURE_HASH 470327709
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen-nb1.470327709"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2478236242
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen121nissan.2478236242"
|
||||
#define SIGNATURE_HASH 500357866
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen121nissan.500357866"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 4147081444
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen121vag.4147081444"
|
||||
#define SIGNATURE_HASH 2034976860
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen121vag.2034976860"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 3736923103
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen128.3736923103"
|
||||
#define SIGNATURE_HASH 1356387175
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen128.1356387175"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1319097307
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen154hyundai.1319097307"
|
||||
#define SIGNATURE_HASH 3237735267
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen154hyundai.3237735267"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2907590097
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen72.2907590097"
|
||||
#define SIGNATURE_HASH 589985129
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen72.589985129"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1044703993
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen81.1044703993"
|
||||
#define SIGNATURE_HASH 2954940993
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen81.2954940993"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1785606005
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen88bmw.1785606005"
|
||||
#define SIGNATURE_HASH 3825866701
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellen88bmw.3825866701"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1377943935
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellenNA6.1377943935"
|
||||
#define SIGNATURE_HASH 3695573447
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellenNA6.3695573447"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2046308675
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellenNA8_96.2046308675"
|
||||
#define SIGNATURE_HASH 4154198523
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.hellenNA8_96.4154198523"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 274508648
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.kin.274508648"
|
||||
#define SIGNATURE_HASH 2654507984
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.kin.2654507984"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2802177183
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.m74_9.2802177183"
|
||||
#define SIGNATURE_HASH 694283303
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.m74_9.694283303"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2261629069
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.mre_f4.2261629069"
|
||||
#define SIGNATURE_HASH 145326133
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.mre_f4.145326133"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 2261629069
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.mre_f7.2261629069"
|
||||
#define SIGNATURE_HASH 145326133
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.mre_f7.145326133"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 677498946
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.prometheus_405.677498946"
|
||||
#define SIGNATURE_HASH 2785405178
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.prometheus_405.2785405178"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 677498946
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.prometheus_469.677498946"
|
||||
#define SIGNATURE_HASH 2785405178
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.prometheus_469.2785405178"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1447858259
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.proteus_f4.1447858259"
|
||||
#define SIGNATURE_HASH 3626543339
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.proteus_f4.3626543339"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1447858259
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.proteus_f7.1447858259"
|
||||
#define SIGNATURE_HASH 3626543339
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.proteus_f7.3626543339"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1447858259
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.proteus_h7.1447858259"
|
||||
#define SIGNATURE_HASH 3626543339
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.proteus_h7.3626543339"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 1475505402
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.s105.1475505402"
|
||||
#define SIGNATURE_HASH 3650507842
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.s105.3650507842"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 190208777
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.subaru_eg33_f7.190208777"
|
||||
#define SIGNATURE_HASH 2234672049
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.subaru_eg33_f7.2234672049"
|
||||
|
|
|
@ -2,5 +2,5 @@
|
|||
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
|
||||
//
|
||||
|
||||
#define SIGNATURE_HASH 4062520710
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.tdg-pdm8.4062520710"
|
||||
#define SIGNATURE_HASH 2084642110
|
||||
#define TS_SIGNATURE "rusEFI master.2023.03.05.tdg-pdm8.2084642110"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.f407-discovery.281286402"
|
||||
signature = "rusEFI master.2023.03.05.f407-discovery.2661298106"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.f407-discovery.281286402" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.f407-discovery.2661298106" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:52 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:43 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.48way.3620637380"
|
||||
signature = "rusEFI master.2023.03.05.48way.1504359036"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.48way.3620637380" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.48way.1504359036" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:35 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:28 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.alphax-2chan.616239127"
|
||||
signature = "rusEFI master.2023.03.05.alphax-2chan.2866751663"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.alphax-2chan.616239127" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.alphax-2chan.2866751663" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:09 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:05 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.alphax-4chan.2279783457"
|
||||
signature = "rusEFI master.2023.03.05.alphax-4chan.159810713"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.alphax-4chan.2279783457" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.alphax-4chan.159810713" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:10 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:06 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.alphax-8chan.744088509"
|
||||
signature = "rusEFI master.2023.03.05.alphax-8chan.2721962757"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.alphax-8chan.744088509" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.alphax-8chan.2721962757" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:11 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:07 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.atlas.1682046083"
|
||||
signature = "rusEFI master.2023.03.05.atlas.3928343611"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.atlas.1682046083" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.atlas.3928343611" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:49 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:41 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.core8.2872250312"
|
||||
signature = "rusEFI master.2023.03.05.core8.626472816"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.core8.2872250312" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.core8.626472816" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:33 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:27 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.cypress.2022377892"
|
||||
signature = "rusEFI master.2023.03.05.cypress.4142870812"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.cypress.2022377892" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.cypress.4142870812" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sun Mar 05 07:02:07 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sun Mar 05 16:51:03 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.f407-discovery.281286402"
|
||||
signature = "rusEFI master.2023.03.05.f407-discovery.2661298106"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.f407-discovery.281286402" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.f407-discovery.2661298106" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:47 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:39 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.f429-discovery.2022377892"
|
||||
signature = "rusEFI master.2023.03.05.f429-discovery.4142870812"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.f429-discovery.2022377892" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.f429-discovery.4142870812" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:48 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:40 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.frankenso_na6.1524230510"
|
||||
signature = "rusEFI master.2023.03.05.frankenso_na6.3569209814"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.frankenso_na6.1524230510" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.frankenso_na6.3569209814" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:39 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:32 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.harley81.1602403564"
|
||||
signature = "rusEFI master.2023.03.05.harley81.3521545300"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.harley81.1602403564" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.harley81.3521545300" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:13 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:09 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen-gm-e67.601870438"
|
||||
signature = "rusEFI master.2023.03.05.hellen-gm-e67.2914773214"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen-gm-e67.601870438" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen-gm-e67.2914773214" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:26 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:21 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen-honda-k.4252383189"
|
||||
signature = "rusEFI master.2023.03.05.hellen-honda-k.1930563437"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen-honda-k.4252383189" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen-honda-k.1930563437" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:18 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:13 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen-nb1.2456590629"
|
||||
signature = "rusEFI master.2023.03.05.hellen-nb1.470327709"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen-nb1.2456590629" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen-nb1.470327709" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:25 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:20 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen121nissan.2478236242"
|
||||
signature = "rusEFI master.2023.03.05.hellen121nissan.500357866"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen121nissan.2478236242" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen121nissan.500357866" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:17 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:12 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen121vag.4147081444"
|
||||
signature = "rusEFI master.2023.03.05.hellen121vag.2034976860"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen121vag.4147081444" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen121vag.2034976860" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:15 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:11 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen128.3736923103"
|
||||
signature = "rusEFI master.2023.03.05.hellen128.1356387175"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen128.3736923103" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen128.1356387175" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:14 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:10 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen154hyundai.1319097307"
|
||||
signature = "rusEFI master.2023.03.05.hellen154hyundai.3237735267"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen154hyundai.1319097307" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen154hyundai.3237735267" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:19 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:15 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen72.2907590097"
|
||||
signature = "rusEFI master.2023.03.05.hellen72.589985129"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen72.2907590097" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen72.589985129" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:22 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:17 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen81.1044703993"
|
||||
signature = "rusEFI master.2023.03.05.hellen81.2954940993"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen81.1044703993" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen81.2954940993" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:23 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:18 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellen88bmw.1785606005"
|
||||
signature = "rusEFI master.2023.03.05.hellen88bmw.3825866701"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellen88bmw.1785606005" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellen88bmw.3825866701" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:21 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:16 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellenNA6.1377943935"
|
||||
signature = "rusEFI master.2023.03.05.hellenNA6.3695573447"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellenNA6.1377943935" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellenNA6.3695573447" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:28 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:22 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.hellenNA8_96.2046308675"
|
||||
signature = "rusEFI master.2023.03.05.hellenNA8_96.4154198523"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.hellenNA8_96.2046308675" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.hellenNA8_96.4154198523" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:29 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:23 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.kin.274508648"
|
||||
signature = "rusEFI master.2023.03.05.kin.2654507984"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.kin.274508648" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.kin.2654507984" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sun Mar 05 07:02:05 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sun Mar 05 16:51:02 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.m74_9.2802177183"
|
||||
signature = "rusEFI master.2023.03.05.m74_9.694283303"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.m74_9.2802177183" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.m74_9.694283303" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:36 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:29 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.mre_f4.2261629069"
|
||||
signature = "rusEFI master.2023.03.05.mre_f4.145326133"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.mre_f4.2261629069" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.mre_f4.145326133" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:32 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:26 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.mre_f7.2261629069"
|
||||
signature = "rusEFI master.2023.03.05.mre_f7.145326133"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.mre_f7.2261629069" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.mre_f7.145326133" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:30 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:24 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.prometheus_405.677498946"
|
||||
signature = "rusEFI master.2023.03.05.prometheus_405.2785405178"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.prometheus_405.677498946" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.prometheus_405.2785405178" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:41 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:34 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.prometheus_469.677498946"
|
||||
signature = "rusEFI master.2023.03.05.prometheus_469.2785405178"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.prometheus_469.677498946" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.prometheus_469.2785405178" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:40 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:33 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.proteus_f4.1447858259"
|
||||
signature = "rusEFI master.2023.03.05.proteus_f4.3626543339"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.proteus_f4.1447858259" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.proteus_f4.3626543339" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:44 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:36 UTC 2023
|
||||
|
||||
pageSize = 26432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.proteus_f7.1447858259"
|
||||
signature = "rusEFI master.2023.03.05.proteus_f7.3626543339"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.proteus_f7.1447858259" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.proteus_f7.3626543339" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:42 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:35 UTC 2023
|
||||
|
||||
pageSize = 26432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.proteus_h7.1447858259"
|
||||
signature = "rusEFI master.2023.03.05.proteus_h7.3626543339"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.proteus_h7.1447858259" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.proteus_h7.3626543339" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:45 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:37 UTC 2023
|
||||
|
||||
pageSize = 26432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.s105.1475505402"
|
||||
signature = "rusEFI master.2023.03.05.s105.3650507842"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.s105.1475505402" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.s105.3650507842" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:37 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:30 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.subaru_eg33_f7.190208777"
|
||||
signature = "rusEFI master.2023.03.05.subaru_eg33_f7.2234672049"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.subaru_eg33_f7.190208777" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.subaru_eg33_f7.2234672049" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:08 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:04 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -34,12 +34,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI master.2023.03.05.tdg-pdm8.4062520710"
|
||||
signature = "rusEFI master.2023.03.05.tdg-pdm8.2084642110"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmware version for title bar.
|
||||
signature= "rusEFI master.2023.03.05.tdg-pdm8.4062520710" ; signature is expected to be 7 or more characters.
|
||||
signature= "rusEFI master.2023.03.05.tdg-pdm8.2084642110" ; signature is expected to be 7 or more characters.
|
||||
|
||||
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
|
||||
useLegacyFTempUnits = false
|
||||
|
@ -87,7 +87,7 @@ enable2ndByteCanID = false
|
|||
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
|
||||
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:50 UTC 2023
|
||||
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:42 UTC 2023
|
||||
|
||||
pageSize = 22432
|
||||
page = 1
|
||||
|
@ -3974,14 +3974,14 @@ running_timeSinceCrankingInSecsGauge = running_timeSinceCrankingInSecs,"running_
|
|||
targetLambdaGauge = targetLambda,"fuel: target lambda", "", 0.5,1.5, 0.5,1.5, 0.5,1.5, 2,2
|
||||
targetAFRGauge = targetAFR,"fuel: target AFR", "ratio", 10.0,20.0, 10.0,20.0, 10.0,20.0, 2,2
|
||||
gaugeCategory = "Timing"
|
||||
baseDwellGauge = baseDwell,"baseDwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"dwell: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"ignition dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"cltTimingCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"timingIatCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"timingPidCorrection", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"luaTimingAdd", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"luaTimingMult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
baseDwellGauge = baseDwell,"Ignition: base dwell", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
sparkDwellGauge = sparkDwell,"Ignition: coil charge time", "ms", 0.0,30.0, 0.0,30.0, 0.0,30.0, 1,1
|
||||
dwellAngleGauge = dwellAngle,"Ignition: dwell duration", "deg", 0.0,120.0, 0.0,120.0, 0.0,120.0, 1,1
|
||||
cltTimingCorrectionGauge = cltTimingCorrection,"Ignition: CLT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingIatCorrectionGauge = timingIatCorrection,"Ignition: IAT correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
timingPidCorrectionGauge = timingPidCorrection,"Ignition: PID correction", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingAddGauge = luaTimingAdd,"Ignition: Lua add", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
luaTimingMultGauge = luaTimingMult,"Ignition: Lua mult", "deg", -20.0,20.0, -20.0,20.0, -20.0,20.0, 2,2
|
||||
gaugeCategory = "Boost Control"
|
||||
luaTargetAddGauge = luaTargetAdd,"Boost: Lua Target Add", "v", -100.0,100.0, -100.0,100.0, -100.0,100.0, 1,1
|
||||
boostOutputGauge = boostOutput,"Boost: Output", "percent", -100.0,100.0, -100.0,100.0, -100.0,100.0, 2,2
|
||||
|
@ -4166,8 +4166,8 @@ gaugeCategory = Ignition
|
|||
sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
dwellGauge = sparkDwell, "Dwell", "mSec", 0, 10, 0.5, 1.0, 6.0, 8.0, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "dwell: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "ign: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
coilDutyCycleGauge = coilDutyCycle, "Ignition: coil duty cycle", "%", 0, 110, 0, 0, 90, 100, 1, 1
|
||||
ignitionLoadGauge = ignitionLoad, "Ignition: load", "%", 0, 300, 0, 0, 300, 300, 1, 1
|
||||
|
||||
gaugeCategory = Acceleration Enrichment
|
||||
deltaTpsGauge = deltaTps, "AE: TPS change", "", 0, 120, 10, 10, 100, 100, 1, 1
|
||||
|
@ -4453,7 +4453,7 @@ entry = deltaTpsValue, "fuel: TPS change", float, "%.3f"
|
|||
entry = canReadCounter, "canReadCounter", int, "%d"
|
||||
entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f"
|
||||
entry = ignitionAdvance, "timing", float, "%.3f"
|
||||
entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f"
|
||||
entry = coilDutyCycle, "Ignition: coil duty cycle", float, "%.3f"
|
||||
entry = idleAirValvePosition, "Idle Air Valve", float, "%.3f"
|
||||
entry = etbTarget, "ETB Target", float, "%.3f"
|
||||
entry = etb1DutyCycle, "ETB Duty", float, "%.3f"
|
||||
|
@ -4718,15 +4718,15 @@ entry = stoichiometricRatio, "fuel: stoich ratio", float, "%.3f"
|
|||
entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f"
|
||||
entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f"
|
||||
entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d"
|
||||
entry = baseDwell, "baseDwell", float, "%.3f"
|
||||
entry = sparkDwell, "dwell: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "ignition dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f"
|
||||
entry = timingIatCorrection, "timingIatCorrection", float, "%.3f"
|
||||
entry = timingPidCorrection, "timingPidCorrection", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f"
|
||||
entry = luaTimingAdd, "luaTimingAdd", float, "%.3f"
|
||||
entry = luaTimingMult, "luaTimingMult", float, "%.3f"
|
||||
entry = baseDwell, "Ignition: base dwell", float, "%.3f"
|
||||
entry = sparkDwell, "Ignition: coil charge time", float, "%.3f"
|
||||
entry = dwellAngle, "Ignition: dwell duration", float, "%.3f"
|
||||
entry = cltTimingCorrection, "Ignition: CLT correction", float, "%.3f"
|
||||
entry = timingIatCorrection, "Ignition: IAT correction", float, "%.3f"
|
||||
entry = timingPidCorrection, "Ignition: PID correction", float, "%.3f"
|
||||
entry = dwellVoltageCorrection, "Ignition: dwell corr", float, "%.3f"
|
||||
entry = luaTimingAdd, "Ignition: Lua add", float, "%.3f"
|
||||
entry = luaTimingMult, "Ignition: Lua mult", float, "%.3f"
|
||||
entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f"
|
||||
entry = m_knockThreshold, "m_knockThreshold", float, "%.3f"
|
||||
entry = m_knockCount, "m_knockCount", int, "%d"
|
||||
|
@ -4843,7 +4843,7 @@ entry = desiredRpmLimit, "User-defined RPM hard limit", int, "%d"
|
|||
entry = fuelInjectionCounter, "fuelInjectionCounter", int, "%d"
|
||||
entry = sparkCounter, "sparkCounter", int, "%d"
|
||||
entry = fuelingLoad, "fuel: load", float, "%.3f"
|
||||
entry = ignitionLoad, "ign: load", float, "%.3f"
|
||||
entry = ignitionLoad, "Ignition: load", float, "%.3f"
|
||||
entry = veTableYAxis, "veTableYAxis", float, "%.3f"
|
||||
entry = tpsFrom, "tpsFrom", float, "%.3f"
|
||||
entry = tpsTo, "tpsTo", float, "%.3f"
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/ac_control.txt Sun Feb 19 03:53:01 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/ac_control.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class AcControl {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class AcControl {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class AcControl {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/antilag_system_state.txt Sat Feb 25 03:30:19 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/antilag_system_state.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class AntilagSystem {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class AntilagSystem {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class AntilagSystem {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/boost_control.txt Sun Feb 19 03:53:01 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/boost_control.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class BoostControl {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class BoostControl {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class BoostControl {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/dc_motors.txt Sat Mar 04 19:07:02 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/dc_motors.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class DcMotors {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class DcMotors {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class DcMotors {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/electronic_throttle.txt Sat Mar 04 19:07:02 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/electronic_throttle.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class ElectronicThrottle {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class ElectronicThrottle {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class ElectronicThrottle {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Sun Feb 19 03:53:01 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class EngineState {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class EngineState {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class EngineState {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 07:02:54 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Mar 05 16:51:45 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -389,7 +389,7 @@ public class Fields {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -427,7 +427,7 @@ public class Fields {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -464,7 +464,7 @@ public class Fields {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
@ -1004,7 +1004,6 @@ public class Fields {
|
|||
public static final int SentEtbType_FORD_TYPE_1 = 2;
|
||||
public static final int SentEtbType_GM_TYPE_1 = 1;
|
||||
public static final int SentEtbType_NONE = 0;
|
||||
public static final int SIGNATURE_HASH = 281286402;
|
||||
public static final int specs_s_size = 12;
|
||||
public static final int spi_device_e_SPI_DEVICE_1 = 1;
|
||||
public static final int spi_device_e_SPI_DEVICE_2 = 2;
|
||||
|
@ -1226,7 +1225,7 @@ public class Fields {
|
|||
public static final int TS_RESPONSE_UNDERRUN = 0x80;
|
||||
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
|
||||
public static final char TS_SET_LOGGER_SWITCH = 'l';
|
||||
public static final String TS_SIGNATURE = "rusEFI master.2023.03.05.f407-discovery.281286402";
|
||||
public static final String TS_SIGNATURE = "rusEFI master.2023.03.05.f407-discovery.2661298106";
|
||||
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
|
||||
public static final char TS_TEST_COMMAND = 't';
|
||||
public static final int TS_TOTAL_OUTPUT_SIZE = 1360;
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Sun Feb 19 03:53:01 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class FuelComputer {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class FuelComputer {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class FuelComputer {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/ignition_state.txt Sun Feb 19 03:53:01 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/ignition_state.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class IgnitionState {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class IgnitionState {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class IgnitionState {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/sensors//sent_state.txt Sat Mar 04 19:07:02 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/sensors//sent_state.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class SentState {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class SentState {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class SentState {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state.txt Sat Mar 04 19:07:02 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class TriggerState {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class TriggerState {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class TriggerState {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state_primary.txt Sat Mar 04 19:07:02 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state_primary.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class TriggerStatePrimary {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class TriggerStatePrimary {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class TriggerStatePrimary {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) console/binary/output_channels.txt Tue Feb 21 04:56:32 UTC 2023
|
||||
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) console/binary/output_channels.txt Sun Mar 05 16:51:01 UTC 2023
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
@ -107,7 +107,7 @@ public class TsOutputs {
|
|||
public static final String GAUGE_CATEGORY_ETB = "ETB more";
|
||||
public static final String GAUGE_CATEGORY_FUEL_MATH = "Fuel: math";
|
||||
public static final String GAUGE_CATEGORY_TIMING = "Timing";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "dwell: coil charge time";
|
||||
public static final String GAUGE_COIL_DWELL_TIME = "Ignition: coil charge time";
|
||||
public static final String GAUGE_NAME_ACCEL_ROLL = "Acceleration: Roll";
|
||||
public static final String GAUGE_NAME_ACCEL_X = "Acceleration: X";
|
||||
public static final String GAUGE_NAME_ACCEL_Y = "Acceleration: Y";
|
||||
|
@ -145,7 +145,7 @@ public class TsOutputs {
|
|||
public static final String GAUGE_NAME_DEBUG_I5 = "debug i5";
|
||||
public static final String GAUGE_NAME_DESIRED_GEAR = "Desired Gear";
|
||||
public static final String GAUGE_NAME_DETECTED_GEAR = "Detected Gear";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "dwell: coil duty cycle";
|
||||
public static final String GAUGE_NAME_DWELL_DUTY = "Ignition: coil duty cycle";
|
||||
public static final String GAUGE_NAME_ECU_TEMPERATURE = "ECU temperature";
|
||||
public static final String GAUGE_NAME_ENGINE_CRC16 = "Engine CRC16";
|
||||
public static final String GAUGE_NAME_ETB_DUTY = "ETB Duty";
|
||||
|
@ -182,7 +182,7 @@ public class TsOutputs {
|
|||
public static final String GAUGE_NAME_IAC = "Idle Air Valve";
|
||||
public static final String GAUGE_NAME_IAT = "IAT";
|
||||
public static final String GAUGE_NAME_IDLE_POSITION = "Idle position sensor";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "ign: load";
|
||||
public static final String GAUGE_NAME_IGNITION_LOAD = "Ignition: load";
|
||||
public static final String GAUGE_NAME_INJECTOR_LAG = "fuel: injector lag";
|
||||
public static final String GAUGE_NAME_ISS = "Input Shaft Speed";
|
||||
public static final String GAUGE_NAME_KNOCK_1 = "knock 1";
|
||||
|
|
Loading…
Reference in New Issue