mirror of https://github.com/rusefi/rusefi.git
implement fuel pressure sensors (#1897)
* add * remove old * remove more old * makefile * fix init * patch up other stuff * actually fix it this time * raw output channels * gauges, UI * scaled channel * fix field ordering
This commit is contained in:
Matthew Kennedy
GitHub
parent
a7a475a1df
commit
4e249889a6
|
|
@ -36,9 +36,9 @@ void setVwPassatB6(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
|||
engineConfiguration->throttlePedalPositionAdcChannel = EFI_ADC_7;
|
||||
|
||||
// "26 - AN volt 2"
|
||||
engineConfiguration->high_fuel_pressure_sensor_1 = EFI_ADC_6;
|
||||
engineConfiguration->highPressureFuel.hwChannel = EFI_ADC_6;
|
||||
// "19 - AN volt 4"
|
||||
engineConfiguration->low_fuel_pressure_sensor = EFI_ADC_12;
|
||||
engineConfiguration->lowPressureFuel.hwChannel = EFI_ADC_12;
|
||||
|
||||
CONFIG(isSdCardEnabled) = false;
|
||||
|
||||
|
|
|
|||
|
|
@ -250,10 +250,13 @@ typedef struct {
|
|||
scaled_percent wastegatePosition; // 268
|
||||
scaled_percent idlePositionSensor; // 270
|
||||
|
||||
scaled_voltage lowFuelPressure; // 272
|
||||
scaled_voltage highFuelPressure1; // 274
|
||||
scaled_voltage rawLowFuelPressure; // 272
|
||||
scaled_voltage rawHighFuelPressure; // 274
|
||||
|
||||
uint8_t unusedAtTheEnd[12]; // we have some unused bytes to allow compatible TS changes
|
||||
scaled_pressure lowFuelPressure; // 276
|
||||
scaled_high_pressure highFuelPressure; // 278
|
||||
|
||||
uint8_t unusedAtTheEnd[8]; // we have some unused bytes to allow compatible TS changes
|
||||
|
||||
// Temporary - will remove soon
|
||||
TsDebugChannels* getDebugChannels() {
|
||||
|
|
|
|||
|
|
@ -519,20 +519,12 @@ void updateTunerStudioState(TunerStudioOutputChannels *tsOutputChannels DECLARE_
|
|||
tsOutputChannels->rawClt = Sensor::getRaw(SensorType::Clt);
|
||||
tsOutputChannels->rawIat = Sensor::getRaw(SensorType::Iat);
|
||||
tsOutputChannels->rawOilPressure = Sensor::getRaw(SensorType::OilPressure);
|
||||
tsOutputChannels->rawLowFuelPressure = Sensor::getRaw(SensorType::FuelPressureLow);
|
||||
tsOutputChannels->rawHighFuelPressure = Sensor::getRaw(SensorType::FuelPressureHigh);
|
||||
|
||||
// offset 16
|
||||
tsOutputChannels->massAirFlowVoltage = hasMafSensor() ? getMafVoltage(PASS_ENGINE_PARAMETER_SIGNATURE) : 0;
|
||||
|
||||
|
||||
if (engineConfiguration->high_fuel_pressure_sensor_1 != EFI_ADC_NONE) {
|
||||
tsOutputChannels->highFuelPressure1 = getVoltage("highFP", engineConfiguration->high_fuel_pressure_sensor_1 PASS_ENGINE_PARAMETER_SUFFIX);
|
||||
}
|
||||
|
||||
if (engineConfiguration->low_fuel_pressure_sensor != EFI_ADC_NONE) {
|
||||
tsOutputChannels->lowFuelPressure = getVoltage("lowFP", engineConfiguration->low_fuel_pressure_sensor PASS_ENGINE_PARAMETER_SUFFIX);
|
||||
}
|
||||
|
||||
|
||||
// offset 20
|
||||
tsOutputChannels->airFuelRatio = Sensor::get(SensorType::Lambda).value_or(0) * 14.7f;
|
||||
|
||||
|
|
@ -613,6 +605,12 @@ void updateTunerStudioState(TunerStudioOutputChannels *tsOutputChannels DECLARE_
|
|||
tsOutputChannels->accelerationY = engine->sensors.accelerometer.y;
|
||||
// 280
|
||||
tsOutputChannels->oilPressure = Sensor::get(SensorType::OilPressure).Value;
|
||||
|
||||
// Low pressure is directly in kpa
|
||||
tsOutputChannels->lowFuelPressure = Sensor::get(SensorType::FuelPressureLow).Value;
|
||||
// High pressure is in bar, aka 100 kpa
|
||||
tsOutputChannels->highFuelPressure = Sensor::get(SensorType::FuelPressureHigh).Value * 0.01f;
|
||||
|
||||
// 288
|
||||
tsOutputChannels->injectionOffset = engine->engineState.injectionOffset;
|
||||
|
||||
|
|
|
|||
|
|
@ -309,43 +309,9 @@ void prepareVoidConfiguration(engine_configuration_s *engineConfiguration) {
|
|||
efiAssertVoid(OBD_PCM_Processor_Fault, engineConfiguration != NULL, "ec NULL");
|
||||
memset(engineConfiguration, 0, sizeof(engine_configuration_s));
|
||||
|
||||
|
||||
// Now that GPIO_UNASSIGNED == 0 we do not really need explicit zero assignments since memset above does that
|
||||
// todo: migrate 'EFI_ADC_NONE' to '0' and eliminate the need in this method altogether
|
||||
for (int i = 0; i < FSIO_ANALOG_INPUT_COUNT ; i++) {
|
||||
engineConfiguration->fsioAdc[i] = EFI_ADC_NONE;
|
||||
}
|
||||
|
||||
engineConfiguration->clt.adcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->iat.adcChannel = EFI_ADC_NONE;
|
||||
|
||||
engineConfiguration->cj125ua = EFI_ADC_NONE;
|
||||
engineConfiguration->cj125ur = EFI_ADC_NONE;
|
||||
engineConfiguration->auxTempSensor1.adcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->auxTempSensor2.adcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->baroSensor.hwChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->throttlePedalPositionAdcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->oilPressure.hwChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->vRefAdcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->vbattAdcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->map.sensor.hwChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->mafAdcChannel = EFI_ADC_NONE;
|
||||
/* this breaks unit tests lovely TODO: fix this?
|
||||
engineConfiguration->tps1_1AdcChannel = EFI_ADC_NONE;
|
||||
*/
|
||||
engineConfiguration->tps2_1AdcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->auxFastSensor1_adcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->externalKnockSenseAdc = EFI_ADC_NONE;
|
||||
engineConfiguration->fuelLevelSensor = EFI_ADC_NONE;
|
||||
engineConfiguration->hipOutputChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->afr.hwChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->high_fuel_pressure_sensor_1 = EFI_ADC_NONE;
|
||||
engineConfiguration->high_fuel_pressure_sensor_2 = EFI_ADC_NONE;
|
||||
|
||||
engineConfiguration->clutchDownPinMode = PI_PULLUP;
|
||||
engineConfiguration->clutchUpPinMode = PI_PULLUP;
|
||||
engineConfiguration->brakePedalPinMode = PI_PULLUP;
|
||||
|
||||
}
|
||||
|
||||
void setDefaultBasePins(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
||||
|
|
|
|||
|
|
@ -325,9 +325,8 @@ static void printAnalogInfo(void) {
|
|||
printAnalogChannelInfo("TPS1 Secondary", engineConfiguration->tps1_2AdcChannel);
|
||||
printAnalogChannelInfo("TPS2 Primary", engineConfiguration->tps2_1AdcChannel);
|
||||
printAnalogChannelInfo("TPS2 Secondary", engineConfiguration->tps2_2AdcChannel);
|
||||
printAnalogChannelInfo("LPF", engineConfiguration->low_fuel_pressure_sensor);
|
||||
printAnalogChannelInfo("HPF1", engineConfiguration->high_fuel_pressure_sensor_1);
|
||||
printAnalogChannelInfo("HPF2", engineConfiguration->high_fuel_pressure_sensor_2);
|
||||
printAnalogChannelInfo("LPF", engineConfiguration->lowPressureFuel.hwChannel);
|
||||
printAnalogChannelInfo("HPF", engineConfiguration->highPressureFuel.hwChannel);
|
||||
printAnalogChannelInfo("pPS1", engineConfiguration->throttlePedalPositionAdcChannel);
|
||||
printAnalogChannelInfo("pPS2", engineConfiguration->throttlePedalPositionSecondAdcChannel);
|
||||
printAnalogChannelInfo("CLT", engineConfiguration->clt.adcChannel);
|
||||
|
|
|
|||
|
|
@ -58,6 +58,9 @@ static const char* s_sensorNames[] = {
|
|||
|
||||
"Oil Pressure",
|
||||
|
||||
"Fuel Pressure (LP)",
|
||||
"Fuel Pressure (HP)",
|
||||
|
||||
"TPS 1",
|
||||
"TPS 1 Primary",
|
||||
"TPS 1 Secondary",
|
||||
|
|
|
|||
|
|
@ -26,6 +26,9 @@ enum class SensorType : unsigned char {
|
|||
|
||||
OilPressure,
|
||||
|
||||
FuelPressureLow,
|
||||
FuelPressureHigh,
|
||||
|
||||
// This is the "resolved" position, potentially composited out of the following two
|
||||
Tps1,
|
||||
// This is the first sensor
|
||||
|
|
|
|||
|
|
@ -571,9 +571,8 @@ static void configureInputs(void) {
|
|||
addChannel("AFR", engineConfiguration->afr.hwChannel, ADC_SLOW);
|
||||
addChannel("Oil Pressure", engineConfiguration->oilPressure.hwChannel, ADC_SLOW);
|
||||
|
||||
addChannel("HFP1", engineConfiguration->high_fuel_pressure_sensor_1, ADC_SLOW);
|
||||
addChannel("HFP2", engineConfiguration->high_fuel_pressure_sensor_2, ADC_SLOW);
|
||||
addChannel("LFP", engineConfiguration->low_fuel_pressure_sensor, ADC_SLOW);
|
||||
addChannel("LFP", engineConfiguration->lowPressureFuel.hwChannel, ADC_SLOW);
|
||||
addChannel("HFP", engineConfiguration->highPressureFuel.hwChannel, ADC_SLOW);
|
||||
|
||||
|
||||
if (CONFIG(isCJ125Enabled)) {
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
|
||||
INIT_SRC_CPP = $(PROJECT_DIR)/init/sensor/init_sensors.cpp \
|
||||
$(PROJECT_DIR)/init/sensor/init_oil_pressure.cpp \
|
||||
$(PROJECT_DIR)/init/sensor/init_fluid_pressure.cpp \
|
||||
$(PROJECT_DIR)/init/sensor/init_tps.cpp \
|
||||
$(PROJECT_DIR)/init/sensor/init_can_sensors.cpp \
|
||||
$(PROJECT_DIR)/init/sensor/init_thermistors.cpp \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,60 @@
|
|||
#include "init.h"
|
||||
#include "adc_subscription.h"
|
||||
#include "engine.h"
|
||||
#include "error_handling.h"
|
||||
#include "global.h"
|
||||
#include "functional_sensor.h"
|
||||
#include "linear_func.h"
|
||||
|
||||
EXTERN_ENGINE;
|
||||
|
||||
static LinearFunc oilpSensorFunc;
|
||||
static FunctionalSensor oilpSensor(SensorType::OilPressure, /* timeout = */ MS2NT(50));
|
||||
|
||||
static LinearFunc fuelPressureFuncLow;
|
||||
static FunctionalSensor fuelPressureSensorLow(SensorType::FuelPressureLow, /* timeout = */ MS2NT(50));
|
||||
|
||||
static LinearFunc fuelPressureFuncHigh;
|
||||
static FunctionalSensor fuelPressureSensorHigh(SensorType::FuelPressureHigh, /* timeout = */ MS2NT(50));
|
||||
|
||||
static void configureFluidPressure(LinearFunc& func, const linear_sensor_s& cfg) {
|
||||
float val1 = cfg.value1;
|
||||
float val2 = cfg.value2;
|
||||
|
||||
// Limit to max given pressure - val1 or val2 could be larger
|
||||
// (sensor may be backwards, high voltage = low pressure)
|
||||
float greaterOutput = val1 > val2 ? val1 : val2;
|
||||
|
||||
// Allow slightly negative output (-5kpa) so as to not fail the sensor when engine is off
|
||||
func.configure(cfg.v1, val1, cfg.v2, val2, /*minOutput*/ -5, greaterOutput);
|
||||
}
|
||||
|
||||
static void initFluidPressure(LinearFunc& func, FunctionalSensor& sensor, const linear_sensor_s& cfg, float bandwidth) {
|
||||
auto channel = cfg.hwChannel;
|
||||
|
||||
// Only register if we have a sensor
|
||||
if (channel == EFI_ADC_NONE) {
|
||||
return;
|
||||
}
|
||||
|
||||
configureFluidPressure(func, cfg);
|
||||
sensor.setFunction(func);
|
||||
|
||||
AdcSubscription::SubscribeSensor(sensor, channel, bandwidth);
|
||||
|
||||
if (!sensor.Register()) {
|
||||
firmwareError(CUSTOM_INVALID_TPS_SETTING, "Duplicate registration for sensor \"%s\"", sensor.getSensorName());
|
||||
}
|
||||
}
|
||||
|
||||
void initOilPressure(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
||||
initFluidPressure(oilpSensorFunc, oilpSensor, CONFIG(oilPressure), 10);
|
||||
initFluidPressure(fuelPressureFuncLow, fuelPressureSensorLow, CONFIG(lowPressureFuel), 10);
|
||||
initFluidPressure(fuelPressureFuncHigh, fuelPressureSensorHigh, CONFIG(highPressureFuel), 100);
|
||||
}
|
||||
|
||||
void reconfigureOilPressure(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
||||
configureFluidPressure(oilpSensorFunc, CONFIG(oilPressure));
|
||||
configureFluidPressure(fuelPressureFuncLow, CONFIG(lowPressureFuel));
|
||||
configureFluidPressure(fuelPressureFuncHigh, CONFIG(highPressureFuel));
|
||||
}
|
||||
|
|
@ -1,49 +0,0 @@
|
|||
#include "init.h"
|
||||
#include "adc_subscription.h"
|
||||
#include "engine.h"
|
||||
#include "error_handling.h"
|
||||
#include "global.h"
|
||||
#include "functional_sensor.h"
|
||||
#include "linear_func.h"
|
||||
#if EFI_TUNER_STUDIO
|
||||
#include "tunerstudio_outputs.h"
|
||||
#endif
|
||||
|
||||
EXTERN_ENGINE;
|
||||
|
||||
LinearFunc oilpSensorFunc;
|
||||
FunctionalSensor oilpSensor(SensorType::OilPressure, /* timeout = */ MS2NT(50));
|
||||
|
||||
void configureOilPressure(LinearFunc& func, const oil_pressure_config_s& cfg) {
|
||||
float val1 = cfg.value1;
|
||||
float val2 = cfg.value2;
|
||||
|
||||
// Limit to max given pressure - val1 or val2 could be larger
|
||||
// (sensor may be backwards, high voltage = low pressure)
|
||||
float greaterOutput = val1 > val2 ? val1 : val2;
|
||||
|
||||
// Allow slightly negative output (-5kpa) so as to not fail the sensor when engine is off
|
||||
func.configure(cfg.v1, val1, cfg.v2, val2, /*minOutput*/ -5, greaterOutput);
|
||||
}
|
||||
|
||||
void initOilPressure(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
||||
// Only register if we have a sensor
|
||||
auto channel = CONFIG(oilPressure.hwChannel);
|
||||
if (channel == EFI_ADC_NONE) {
|
||||
return;
|
||||
}
|
||||
|
||||
configureOilPressure(oilpSensorFunc, CONFIG(oilPressure));
|
||||
oilpSensor.setFunction(oilpSensorFunc);
|
||||
|
||||
// Subscribe the sensor to the ADC
|
||||
AdcSubscription::SubscribeSensor(oilpSensor, channel, 10);
|
||||
|
||||
if (!oilpSensor.Register()) {
|
||||
warning(OBD_Oil_Pressure_Sensor_Malfunction, "Duplicate oilp sensor registration, ignoring");
|
||||
}
|
||||
}
|
||||
|
||||
void reconfigureOilPressure(DECLARE_CONFIG_PARAMETER_SIGNATURE) {
|
||||
configureOilPressure(oilpSensorFunc, CONFIG(oilPressure));
|
||||
}
|
||||
|
|
@ -168,6 +168,7 @@ struct_no_prefix engine_configuration_s
|
|||
|
||||
! These are used currently only for output channels - but could be for config as well
|
||||
#define PACK_MULT_PRESSURE 30
|
||||
#define PACK_MULT_HIGH_PRESSURE 10
|
||||
#define PACK_MULT_PERCENT 100
|
||||
#define PACK_MULT_TEMPERATURE 100
|
||||
#define PACK_ADD_TEMPERATURE 40
|
||||
|
|
@ -368,13 +369,13 @@ float resistance_3;;"Ohm", 1, 0, 0, 200000, 1
|
|||
float bias_resistor;+Pull-up resistor value on your board;"Ohm", 1, 0, 0, 200000, 1
|
||||
end_struct
|
||||
|
||||
struct oil_pressure_config_s @brief Oil pressure sensor interpolation
|
||||
struct linear_sensor_s @brief Linear sensor interpolation
|
||||
adc_channel_e hwChannel;
|
||||
uint8_t[3] alignmentFill;;"unit", 1, 0, 0, 100, 0
|
||||
float v1;; "volts", 1, 0.0, 0, 10.0, 2
|
||||
float value1;; "kPa", 1, 0.0, 0, 1000.0, 2
|
||||
float value1;; "kPa", 1, 0.0, 0, 1000000.0, 2
|
||||
float v2;; "volts", 1, 0.0, 0, 10.0, 2
|
||||
float value2;; "kPa", 1, 0.0, 0, 1000.0, 2
|
||||
float value2;; "kPa", 1, 0.0, 0, 1000000.0, 2
|
||||
end_struct
|
||||
|
||||
struct ThermistorConf @brief Thermistor curve parameters
|
||||
|
|
@ -601,8 +602,8 @@ trigger_config_s trigger;
|
|||
|
||||
custom spi_device_e 1 bits,U32, @OFFSET@, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4", "INVALID", "INVALID", "INVALID"
|
||||
spi_device_e hip9011SpiDevice;
|
||||
adc_channel_e high_fuel_pressure_sensor_1;
|
||||
adc_channel_e high_fuel_pressure_sensor_2;
|
||||
uint8_t unused541;;"unit", 1, 0, 0, 100, 0
|
||||
uint8_t unused542;;"unit", 1, 0, 0, 100, 0
|
||||
adc_channel_e mafAdcChannel;See hasMafSensor
|
||||
|
||||
|
||||
|
|
@ -1195,8 +1196,7 @@ int16_t tps2Max;Full throttle#2. tpsMax value as 10 bit ADC value. Not Voltage!\
|
|||
pin_output_mode_e starterControlPinMode;
|
||||
adc_channel_e wastegatePositionSensor;
|
||||
afr_override_e ignOverrideMode;+Override the Y axis (load) value used for the ignition table.\nAdvanced users only: If you aren't sure you need this, you probably don't need this.
|
||||
uint8_t[2] unused_former_warmup_target_afr;;"units", 1, 0, -20, 100, 0
|
||||
adc_channel_e low_fuel_pressure_sensor;
|
||||
uint8_t[3] unused_former_warmup_target_afr;;"units", 1, 0, -20, 100, 0
|
||||
|
||||
float boostCutPressure;+MAP value above which fuel is cut in case of overboost.\n0 to disable overboost cut.;"kPa (absolute)", 1, 0, 0, 500, 0
|
||||
|
||||
|
|
@ -1282,7 +1282,7 @@ tle8888_mode_e tle8888mode;
|
|||
|
||||
pid_s[AUX_PID_COUNT iterate] auxPid;
|
||||
|
||||
oil_pressure_config_s oilPressure;
|
||||
linear_sensor_s oilPressure;
|
||||
|
||||
spi_device_e accelerometerSpiDevice;
|
||||
uint8_t[1] unusedAuxVoltage1_TODO_332;;"units", 1, 0, -20, 100, 0
|
||||
|
|
@ -1322,7 +1322,10 @@ float[CRANKING_ADVANCE_CURVE_SIZE] crankingAdvance ;+Optional timing advance
|
|||
float[CLT_CURVE_SIZE] iacCoastingBins;CLT-based idle position for coasting (used in Auto-PID Idle mode);"C", 1, 0, -100.0, 250.0, 2
|
||||
float[CLT_CURVE_SIZE] iacCoasting; CLT-based idle position for coasting (used in Auto-PID Idle mode);"%", 1, 0, 0.0, 100.0, 2
|
||||
|
||||
uint8_t[576] unused3288;;"units", 1, 0, -20, 100, 0
|
||||
linear_sensor_s highPressureFuel;
|
||||
linear_sensor_s lowPressureFuel;
|
||||
|
||||
uint8_t[536] unused3328;;"units", 1, 0, -20, 100, 0
|
||||
|
||||
float tChargeAirCoefMin;;"Min tCharge Coeff.", 1, 0, 0.0, 1.0, 4
|
||||
float tChargeAirCoefMax;;"Max tCharge Coeff.", 1, 0, 0.0, 1.0, 4
|
||||
|
|
@ -1554,6 +1557,9 @@ end_struct
|
|||
#define GAUGE_NAME_ETB_ERROR "ETB position error"
|
||||
#define GAUGE_NAME_ETB_DUTY "ETB Duty"
|
||||
|
||||
#define GAUGE_NAME_FUEL_PRESSURE_LOW "Fuel pressure (low)"
|
||||
#define GAUGE_NAME_FUEL_PRESSURE_HIGH "Fuel pressure (high)"
|
||||
|
||||
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
|
||||
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
|
||||
#define GAUGE_NAME_ACCEL_Z "Acceleration: Z"
|
||||
|
|
|
|||
|
|
@ -363,9 +363,10 @@ enable2ndByteCanID = false
|
|||
rawWastegatePosition = scalar, U16, 266, "V",{1/@@PACK_MULT_VOLTAGE@@}, 0.0
|
||||
wastegatePositionSensor = scalar, S16, 268, "%",{1/@@PACK_MULT_PERCENT@@}, 0
|
||||
idlePositionSensor = scalar, S16, 270, "%",{1/@@PACK_MULT_PERCENT@@}, 0
|
||||
|
||||
lowFPValue = scalar, U16, 272, "V",,{1/@@PACK_MULT_VOLTAGE@@},, 0
|
||||
highFP1Value = scalar, U16, 274, "V",,{1/@@PACK_MULT_VOLTAGE@@},, 0
|
||||
rawLowFuelPressure = scalar, U16, 272, "V",{1/@@PACK_MULT_VOLTAGE@@}, 0
|
||||
rawHighFuelPressure = scalar, U16, 274, "V",{1/@@PACK_MULT_VOLTAGE@@}, 0
|
||||
lowFuelPressure = scalar, S16, 276, "kpa", {1/@@PACK_MULT_PRESSURE@@}, 0
|
||||
highFuelPressure = scalar, S16, 278, "bar", {1/@@PACK_MULT_HIGH_PRESSURE@@}, 0
|
||||
|
||||
;
|
||||
; see TunerStudioOutputChannels struct
|
||||
|
|
@ -953,6 +954,8 @@ gaugeCategory = Sensors - Extra 1
|
|||
idleAirValvePositionGauge = idleAirValvePosition, "Idle position", "%", 0, 100, 0, 0, 100, 100, 1, 1
|
||||
AuxT1Gauge = auxt1, "Aux temp 1", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
AuxT2Gauge = auxt2, "Aux temp 2", "deg C", -40, 140, -15, 1, 95, 110, 1, 1
|
||||
lowFuelPressureGauge = lowFuelPressure, @@GAUGE_NAME_FUEL_PRESSURE_LOW@@, "kPa", 0, 700, 0, 0, 700, 700, 1, 0
|
||||
highFuelPressureGauge = highFuelPressure, @@GAUGE_NAME_FUEL_PRESSURE_HIGH@@, "bar", 0, 200, 0, 0, 200, 200, 1, 0
|
||||
|
||||
gaugeCategory = Ignition
|
||||
ignadvGauge = ignitionAdvance, "Ignition timing", "degrees", -100, 100, -999, -999, 999, 999, 1, 1
|
||||
|
|
@ -1004,8 +1007,8 @@ gaugeCategory = Sensors - Raw
|
|||
rawPpsSecondaryGauge = rawPpsSecondary,"Raw Pedal Secondary","volts", 0, 5, 0, 0, 5, 5, 3, 0
|
||||
rawIdlePositionSensorGauge = rawIdlePositionSensor, "Raw Idle Position", "volts", 0, 5, 0, 0, 5, 5, 3, 0
|
||||
rawWastegatePositionGauge = rawWastegatePosition,"Raw Wastegate Position","volts", 0, 5, 0, 0, 5, 5, 3, 0
|
||||
lowFPValueGauge = lowFPValue,"Raw low fuel voltage","volts", 0, 5, 0, 0, 5, 5, 3, 0
|
||||
highFP1ValueGauge = highFP1Value,"Raw high1 fuel voltage","volts", 0, 5, 0, 0, 5, 5, 3, 0
|
||||
rawLowFuelPressureGauge = rawLowFuelPressure,"Raw fuel pressure (low) voltage","volts", 0, 5, 0, 0, 5, 5, 3, 0
|
||||
rawHighFuelPressureGauge = rawHighFuelPressure,"Raw fuel pressure (high) voltage","volts", 0, 5, 0, 0, 5, 5, 3, 0
|
||||
|
||||
gaugeCategory = Transmission
|
||||
desiredGearGauge = tcuDesiredGear, "Desired", "gear", -1, 10, -1, -1, 10, 10, 0, 0
|
||||
|
|
@ -1139,8 +1142,8 @@ gaugeCategory = Knock
|
|||
entry = throttlePedalPosition, @@GAUGE_NAME_THROTTLE_PEDAL@@, float, "%.3f"
|
||||
entry = totalTriggerErrorCounter, @@GAUGE_NAME_TRG_ERR@@,int, "%d"
|
||||
entry = idleAirValvePosition, @@GAUGE_NAME_IAC@@, float, "%.3f"
|
||||
entry = lowFPValue, "low pressure", float, "%.3f"
|
||||
entry = highFP1Value, "high pressure", float, "%.3f"
|
||||
entry = lowFuelPressure, @@GAUGE_NAME_FUEL_PRESSURE_LOW@@, float, "%.3f"
|
||||
entry = highFuelPressure, @@GAUGE_NAME_FUEL_PRESSURE_HIGH@@, float, "%.3f"
|
||||
|
||||
entry = injectorLagMs, @@GAUGE_NAME_INJECTOR_LAG@@, float, "%.3f"
|
||||
entry = fuelRunning, @@GAUGE_NAME_FUEL_RUNNING@@, float, "%.3f"
|
||||
|
|
@ -1411,6 +1414,7 @@ menuDialog = main
|
|||
# Misc sensors
|
||||
subMenu = speedSensor, "Vehicle speed sensor"
|
||||
subMenu = oilPressureSensor, "Oil pressure"
|
||||
subMenu = fuelPressureSensor, "Fuel pressure"
|
||||
subMenu = egtInputs, "EGT" @@if_ts_show_egt
|
||||
subMenu = wastegateIdlePos, "Wastegate and idle position sensors"
|
||||
|
||||
|
|
@ -1996,9 +2000,6 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
|
|||
field = "trigger stimulator pin #1", triggerSimulatorPins1
|
||||
field = "trigger stimulator pin #2", triggerSimulatorPins2
|
||||
field = "trigger stimulator pin #2", triggerSimulatorPins3
|
||||
field = high_fuel_pressure_sensor_1, high_fuel_pressure_sensor_1
|
||||
field = high_fuel_pressure_sensor_2, high_fuel_pressure_sensor_2
|
||||
field = low_fuel_pressure_sensor, low_fuel_pressure_sensor
|
||||
field = "Warning Led", warningLedPin
|
||||
field = "tle6240_cs", tle6240_cs
|
||||
field = "tle6240 SPI", tle6240spiDevice
|
||||
|
|
@ -2240,6 +2241,29 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
|
|||
panel = oilp_settings, West
|
||||
panel = oilPressureGauges, East
|
||||
|
||||
dialog = fuelp_settings, "Fuel Pressure Sensor"
|
||||
field = "Fuel low pressure ADC input", lowPressureFuel_hwChannel
|
||||
field = "low voltage", lowPressureFuel_v1, {lowPressureFuel_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "low pressure", lowPressureFuel_value1, {lowPressureFuel_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "high voltage", lowPressureFuel_v2, {lowPressureFuel_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "high pressure", lowPressureFuel_value2, {lowPressureFuel_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
field = "Fuel high pressure ADC input", highPressureFuel_hwChannel
|
||||
field = "low voltage", highPressureFuel_v1, {highPressureFuel_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "low pressure", highPressureFuel_value1, {highPressureFuel_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "high voltage", highPressureFuel_v2, {highPressureFuel_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "high pressure", highPressureFuel_value2, {highPressureFuel_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
dialog = fuelPressureGauges
|
||||
gauge = lowFuelPressureGauge
|
||||
gauge = rawLowFuelPressureGauge
|
||||
gauge = highFuelPressureGauge
|
||||
gauge = rawHighFuelPressureGauge
|
||||
|
||||
dialog = fuelPressureSensor, "", border
|
||||
panel = fuelp_settings, West
|
||||
panel = fuelPressureGauges, East
|
||||
|
||||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
field = "MAP ADC input", map_sensor_hwChannel
|
||||
|
|
|
|||
|
|
@ -51,6 +51,7 @@ using scaled_temperature = scaled_channel<int16_t, PACK_MULT_TEMPERATURE>; // +-
|
|||
using scaled_ms = scaled_channel<int16_t, PACK_MULT_MS>; // +- 100ms at 0.003ms precision
|
||||
using scaled_percent = scaled_channel<int16_t, PACK_MULT_PERCENT>; // +-327% at 0.01% resolution
|
||||
using scaled_pressure = scaled_channel<uint16_t, PACK_MULT_PRESSURE>; // 0-2000kPa (~300psi) at 0.03kPa resolution
|
||||
using scaled_high_pressure = scaled_channel<uint16_t, PACK_MULT_HIGH_PRESSURE>; // 0-6553 bar (~95k psi) at 0.1 bar resolution
|
||||
using scaled_angle = scaled_channel<int16_t, PACK_MULT_ANGLE>; // +-655 degrees at 0.02 degree resolution
|
||||
using scaled_voltage = scaled_channel<uint16_t, PACK_MULT_VOLTAGE>; // 0-65v at 1mV resolution
|
||||
using scaled_afr = scaled_channel<uint16_t, PACK_MULT_AFR>; // 0-65afr at 0.001 resolution
|
||||
|
|
|
|||
Loading…
Reference in New Issue