diff --git a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h index 42020102eb..270d354e03 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h @@ -427,7 +427,7 @@ #define GAUGE_NAME_ETB_ERROR "ETB position error" #define GAUGE_NAME_ETB_TARGET "ETB position target" #define GAUGE_NAME_FLEX "Flex Ethanol %" -#define GAUGE_NAME_FUEL_BARO_CORR "fuel: Barometric pressure correction" +#define GAUGE_NAME_FUEL_BARO_CORR "fuel: Barometric pressure mult" #define GAUGE_NAME_FUEL_BASE "fuel: base mass" #define GAUGE_NAME_FUEL_CHARGE_TEMP "fuel: Estimated charge temperature" #define GAUGE_NAME_FUEL_CLT_CORR "fuel: CLT correction" @@ -445,7 +445,7 @@ #define GAUGE_NAME_FUEL_PRESSURE_LOW "Fuel pressure (low)" #define GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS "kPa" #define GAUGE_NAME_FUEL_RUNNING "fuel: running" -#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration extra fuel ms" +#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration add fuel ms" #define GAUGE_NAME_FUEL_TPS_ROC "fuel: TPS change" #define GAUGE_NAME_FUEL_TRIM "fuel: fuel trim" #define GAUGE_NAME_FUEL_TRIM_2 "fuel: fuel trim 2" @@ -1026,7 +1026,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_51012 +#define SIGNATURE_HASH snap_16528 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1298,7 +1298,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.01.cypress.snap_51012" +#define TS_SIGNATURE "rusEFI 2022.11.01.cypress.snap_16528" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h index 09e75725fe..b86ecb76c4 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h @@ -427,7 +427,7 @@ #define GAUGE_NAME_ETB_ERROR "ETB position error" #define GAUGE_NAME_ETB_TARGET "ETB position target" #define GAUGE_NAME_FLEX "Flex Ethanol %" -#define GAUGE_NAME_FUEL_BARO_CORR "fuel: Barometric pressure correction" +#define GAUGE_NAME_FUEL_BARO_CORR "fuel: Barometric pressure mult" #define GAUGE_NAME_FUEL_BASE "fuel: base mass" #define GAUGE_NAME_FUEL_CHARGE_TEMP "fuel: Estimated charge temperature" #define GAUGE_NAME_FUEL_CLT_CORR "fuel: CLT correction" @@ -445,7 +445,7 @@ #define GAUGE_NAME_FUEL_PRESSURE_LOW "Fuel pressure (low)" #define GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS "kPa" #define GAUGE_NAME_FUEL_RUNNING "fuel: running" -#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration extra fuel ms" +#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration add fuel ms" #define GAUGE_NAME_FUEL_TPS_ROC "fuel: TPS change" #define GAUGE_NAME_FUEL_TRIM "fuel: fuel trim" #define GAUGE_NAME_FUEL_TRIM_2 "fuel: fuel trim 2" @@ -1026,7 +1026,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_25992 +#define SIGNATURE_HASH snap_57948 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1298,7 +1298,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.01.kin.snap_25992" +#define TS_SIGNATURE "rusEFI 2022.11.01.kin.snap_57948" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h index 55c0009c2b..e516eafc7c 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h @@ -437,7 +437,7 @@ #define GAUGE_NAME_ETB_ERROR "ETB position error" #define GAUGE_NAME_ETB_TARGET "ETB position target" #define GAUGE_NAME_FLEX "Flex Ethanol %" -#define GAUGE_NAME_FUEL_BARO_CORR "fuel: Barometric pressure correction" +#define GAUGE_NAME_FUEL_BARO_CORR "fuel: Barometric pressure mult" #define GAUGE_NAME_FUEL_BASE "fuel: base mass" #define GAUGE_NAME_FUEL_CHARGE_TEMP "fuel: Estimated charge temperature" #define GAUGE_NAME_FUEL_CLT_CORR "fuel: CLT correction" @@ -455,7 +455,7 @@ #define GAUGE_NAME_FUEL_PRESSURE_LOW "Fuel pressure (low)" #define GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS "kPa" #define GAUGE_NAME_FUEL_RUNNING "fuel: running" -#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration extra fuel ms" +#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration add fuel ms" #define GAUGE_NAME_FUEL_TPS_ROC "fuel: TPS change" #define GAUGE_NAME_FUEL_TRIM "fuel: fuel trim" #define GAUGE_NAME_FUEL_TRIM_2 "fuel: fuel trim 2" @@ -992,7 +992,7 @@ #define show_Frankenso_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH snap_7838 +#define SIGNATURE_HASH snap_39242 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1265,7 +1265,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.01.subaru_eg33_f7.snap_7838" +#define TS_SIGNATURE "rusEFI 2022.11.01.subaru_eg33_f7.snap_39242" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/console/binary/generated/data_logs.ini b/firmware/console/binary/generated/data_logs.ini index 32c4cc4d7c..5f898ba87c 100644 --- a/firmware/console/binary/generated/data_logs.ini +++ b/firmware/console/binary/generated/data_logs.ini @@ -58,7 +58,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -300,7 +300,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -320,7 +320,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -384,20 +384,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -454,14 +454,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -480,7 +480,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/console/binary/generated/gauges.ini b/firmware/console/binary/generated/gauges.ini index 16cffa6e09..1e3349014f 100644 --- a/firmware/console/binary/generated/gauges.ini +++ b/firmware/console/binary/generated/gauges.ini @@ -69,7 +69,7 @@ wallFuelCorrectionGauge = wallFuelCorrection,"fuel: wall correction", "mg", 0.0, revolutionCounterSinceStartGauge = revolutionCounterSinceStart,"revolutionCounterSinceStart", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 deltaTpsGauge = deltaTps,"fuel: TPS change", "ratio", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 canReadCounterGauge = canReadCounter,"canReadCounter", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 -tpsAccelFuelGauge = tpsAccelFuel,"fuel: TPS acceleration extra fuel ms", "ms", 0.0,0.0, 0.0,0.0, 0.0,0.0, 3,3 +tpsAccelFuelGauge = tpsAccelFuel,"fuel: TPS acceleration add fuel ms", "ms", 0.0,0.0, 0.0,0.0, 0.0,0.0, 3,3 ignitionAdvanceGauge = ignitionAdvance,"timing", "deg", 0.0,0.0, 0.0,0.0, 0.0,0.0, 1,1 sparkDwellValueGauge = sparkDwellValue,"dwell: coil charge time", "ms", 0.0,0.0, 0.0,0.0, 0.0,0.0, 1,1 coilDutyCycleGauge = coilDutyCycle,"dwell: coil duty cycle", "%", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/console/binary/generated/sensors.java b/firmware/console/binary/generated/sensors.java index fe820c3f9b..19408f4679 100644 --- a/firmware/console/binary/generated/sensors.java +++ b/firmware/console/binary/generated/sensors.java @@ -37,7 +37,7 @@ wallFuelCorrection("fuel: wall correction", SensorCategory.SENSOR_INPUTS, FieldT revolutionCounterSinceStart("revolutionCounterSinceStart", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 70, 1.0, 0.0, 0.0, ""), deltaTps("fuel: TPS change", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 72, 0.01, 0.0, 0.0, "ratio"), canReadCounter("canReadCounter", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 74, 1.0, 0.0, 0.0, ""), -tpsAccelFuel("fuel: TPS acceleration extra fuel ms", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 76, 0.0033333333333333335, 0.0, 0.0, "ms"), +tpsAccelFuel("fuel: TPS acceleration add fuel ms", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 76, 0.0033333333333333335, 0.0, 0.0, "ms"), ignitionAdvance("timing", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 78, 0.02, 0.0, 0.0, "deg"), sparkDwellValue("dwell: coil charge time", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 80, 0.0033333333333333335, 0.0, 0.0, "ms"), coilDutyCycle("dwell: coil duty cycle", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 82, 0.01, 0.0, 0.0, "%"), @@ -382,7 +382,7 @@ unusedAtTheEnd136("unusedAtTheEnd 136", SensorCategory.SENSOR_INPUTS, FieldType. unusedAtTheEnd137("unusedAtTheEnd 137", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 764, 1.0, 0.0, 0.0, ""), unusedAtTheEnd138("unusedAtTheEnd 138", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 765, 1.0, 0.0, 0.0, ""), alignmentFill_at_766("need 4 byte alignment", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 766, 1.0, -20.0, 100.0, "units"), -m_knockRetard("Degrees retarded: larger number = more retard", SensorCategory.SENSOR_INPUTS, FieldType.INT, 768, 1.0, -1.0, -1.0, ""), +m_knockRetard("Knock Degrees retarded\nlarger number = more retard", SensorCategory.SENSOR_INPUTS, FieldType.INT, 768, 1.0, -1.0, -1.0, ""), m_knockThreshold("m_knockThreshold", SensorCategory.SENSOR_INPUTS, FieldType.INT, 772, 1.0, -1.0, -1.0, ""), m_knockCount("m_knockCount", SensorCategory.SENSOR_INPUTS, FieldType.INT, 776, 1.0, -1.0, -1.0, ""), m_maximumRetard("m_maximumRetard", SensorCategory.SENSOR_INPUTS, FieldType.INT, 780, 1.0, -1.0, -1.0, ""), @@ -399,7 +399,7 @@ targetLambda("targetLambda", SensorCategory.SENSOR_INPUTS, FieldType.INT, 824, 1 stoichiometricRatio("stoichiometricRatio", SensorCategory.SENSOR_INPUTS, FieldType.INT, 828, 1.0, -1.0, -1.0, ""), targetAFR("targetAFR", SensorCategory.SENSOR_INPUTS, FieldType.INT, 832, 1.0, -1.0, -1.0, ""), sdTcharge_coff("sdTcharge_coff", SensorCategory.SENSOR_INPUTS, FieldType.INT, 836, 1.0, -1.0, -1.0, ""), -sdAirMassInOneCylinder("Speed-density logic: calculated air mass in one cylinder, in grams", SensorCategory.SENSOR_INPUTS, FieldType.INT, 840, 1.0, -1.0, -1.0, ""), +sdAirMassInOneCylinder("SD cylinder mass\nSpeed-density logic: calculated air mass in one cylinder, in grams", SensorCategory.SENSOR_INPUTS, FieldType.INT, 840, 1.0, -1.0, -1.0, ""), retardThresholdRpm("retardThresholdRpm", SensorCategory.SENSOR_INPUTS, FieldType.INT, 848, 1.0, -1.0, -1.0, ""), luaTargetAdd("luaTargetAdd", SensorCategory.SENSOR_INPUTS, FieldType.INT, 860, 1.0, -1.0, -1.0, ""), luaTargetMult("luaTargetMult", SensorCategory.SENSOR_INPUTS, FieldType.INT, 864, 1.0, -1.0, -1.0, ""), @@ -418,11 +418,11 @@ tpsVoltageMCU("tpsVoltageMCU", SensorCategory.SENSOR_INPUTS, FieldType.INT, 936, tpsVoltageBoard("tpsVoltageBoard", SensorCategory.SENSOR_INPUTS, FieldType.INT, 940, 1.0, -1.0, -1.0, ""), currentBaroCorrectedVE("currentBaroCorrectedVE", SensorCategory.SENSOR_INPUTS, FieldType.INT, 944, 1.0, -1.0, -1.0, ""), injectorFlowCorrection("injectorFlowCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT, 948, 1.0, -1.0, -1.0, ""), -baroCorrection("fuel: Barometric pressure correction", SensorCategory.SENSOR_INPUTS, FieldType.INT, 952, 1.0, -1.0, -1.0, ""), +baroCorrection("fuel: Barometric pressure mult", SensorCategory.SENSOR_INPUTS, FieldType.INT, 952, 1.0, -1.0, -1.0, ""), cranking("cranking", SensorCategory.SENSOR_INPUTS, FieldType.INT, 956, 1.0, -1.0, -1.0, ""), running("running", SensorCategory.SENSOR_INPUTS, FieldType.INT, 976, 1.0, -1.0, -1.0, ""), sparkDwell("ignition dwell duration in ms\nSee also dwellAngle", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1000, 1.0, -1.0, -1.0, ""), -dwellAngle("ignition dwell duration as crankshaft angle\nNAN if engine is stopped\nSee also sparkDwell", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1004, 1.0, -1.0, -1.0, ""), +dwellAngle("ignition dwell duration\nas crankshaft angle\nNAN if engine is stopped\nSee also sparkDwell", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1004, 1.0, -1.0, -1.0, ""), cltTimingCorrection("cltTimingCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 1008, 0.01, -20.0, 20.0, "deg"), timingIatCorrection("timingIatCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 1010, 0.01, -20.0, 20.0, "deg"), timingPidCorrection("timingPidCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 1012, 0.01, -20.0, 20.0, "deg"), @@ -470,16 +470,16 @@ triggerStateIndex("triggerStateIndex", SensorCategory.SENSOR_INPUTS, FieldType.I vvtCounter("vvtCounter", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 1169, 1.0, -1.0, -1.0, ""), camResyncCounter("camResyncCounter", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 1170, 1.0, -1.0, -1.0, ""), vvtStateIndex("vvtStateIndex", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 1171, 1.0, -1.0, -1.0, ""), -wallFuelCorrection("fuel injection time correction to account for wall wetting effect for current cycle", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1176, 1.0, -1.0, -1.0, ""), -wallFuel("Amount of fuel on the wall, in ms of injector open time for each injector.", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1180, 1.0, -1.0, -1.0, ""), +wallFuelCorrection("fuel wallwetting injection time\n correction to account for wall wetting effect for current cycle", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1176, 1.0, -1.0, -1.0, ""), +wallFuel("Fuel on the wall\nin ms of injector open time for each injector.", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1180, 1.0, -1.0, -1.0, ""), idleState("idleState", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1184, 1.0, -1.0, -1.0, ""), currentIdlePosition("idle: current position\nthat's current position with CLT and IAT corrections", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1188, 1.0, -1.0, -1.0, ""), baseIdlePosition("idle: base value\ncurrent position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1192, 1.0, -1.0, -1.0, ""), -iacByTpsTaper("idle: iacByTpsTaper portion of idle", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1196, 1.0, -1.0, -1.0, ""), -throttlePedalUpState("true in IDLE throttle pedal state, false if driver is touching the pedal\ntodo: better name for this field?", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1200, 1.0, -1.0, -1.0, ""), +iacByTpsTaper("idle: iacByTpsTaper portion", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1196, 1.0, -1.0, -1.0, ""), +throttlePedalUpState("idle: throttlePedalUpState\ntrue in IDLE throttle pedal state, false if driver is touching the pedal\ntodo: better name for this field?", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1200, 1.0, -1.0, -1.0, ""), targetRpmByClt("idle: target by CLT", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1208, 1.0, -1.0, -1.0, ""), targetRpmAcBump("idle: A/C bump", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1212, 1.0, -1.0, -1.0, ""), -iacByRpmTaper("idle: iacByRpmTaper portion of idle", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1216, 1.0, -1.0, -1.0, ""), +iacByRpmTaper("idle: iacByRpmTaper portion", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1216, 1.0, -1.0, -1.0, ""), luaAdd("idle: Lua Adder", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1220, 1.0, -1.0, -1.0, ""), baseDwell("baseDwell", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1224, 1.0, -1.0, -1.0, ""), dwellVoltageCorrection("dwellVoltageCorrection", SensorCategory.SENSOR_INPUTS, FieldType.INT, 1228, 1.0, -1.0, -1.0, ""), diff --git a/firmware/console/binary_log/log_fields_generated.h b/firmware/console/binary_log/log_fields_generated.h index fbf1dd4131..fabffa89e6 100644 --- a/firmware/console/binary_log/log_fields_generated.h +++ b/firmware/console/binary_log/log_fields_generated.h @@ -39,7 +39,7 @@ static constexpr LogField fields[] = { {engine->outputChannels.revolutionCounterSinceStart, "revolutionCounterSinceStart", "", 0}, {engine->outputChannels.deltaTps, "fuel: TPS change", "ratio", 0}, {engine->outputChannels.canReadCounter, "canReadCounter", "", 0}, - {engine->outputChannels.tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", "ms", 3}, + {engine->outputChannels.tpsAccelFuel, "fuel: TPS acceleration add fuel ms", "ms", 3}, {engine->outputChannels.ignitionAdvance, "timing", "deg", 1}, {engine->outputChannels.sparkDwellValue, "dwell: coil charge time", "ms", 1}, {engine->outputChannels.coilDutyCycle, "dwell: coil duty cycle", "%", 0}, @@ -265,20 +265,20 @@ static constexpr LogField fields[] = { {engine->engineState.tpsVoltageBoard, "tpsVoltageBoard", "", 0}, {engine->engineState.currentBaroCorrectedVE, "currentBaroCorrectedVE", "", 0}, {engine->engineState.injectorFlowCorrection, "injectorFlowCorrection", "", 0}, - {engine->engineState.baroCorrection, "fuel: Barometric pressure correction", "", 0}, - {engine->engineState.cranking.baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", "", 0}, + {engine->engineState.baroCorrection, "fuel: Barometric pressure mult", "", 0}, + {engine->engineState.cranking.baseFuel, "Fuel: base duration", "", 0}, {engine->engineState.cranking.coolantTemperatureCoefficient, "cranking.coolantTemperatureCoefficient", "", 0}, {engine->engineState.cranking.tpsCoefficient, "cranking.tpsCoefficient", "", 0}, {engine->engineState.cranking.durationCoefficient, "cranking.durationCoefficient", "", 0}, - {engine->engineState.cranking.fuel, "Actual injection duration based on all above coefficients.", "", 0}, + {engine->engineState.cranking.fuel, "Fuel: Actual injection", "", 0}, {engine->engineState.running.postCrankingFuelCorrection, "running.postCrankingFuelCorrection", "", 0}, {engine->engineState.running.intakeTemperatureCoefficient, "fuel: IAT correction", "", 0}, {engine->engineState.running.coolantTemperatureCoefficient, "fuel: CLT correction", "", 0}, {engine->engineState.running.timeSinceCrankingInSecs, "running.timeSinceCrankingInSecs", "", 0}, {engine->engineState.running.baseFuel, "running.baseFuel", "", 0}, - {engine->engineState.running.fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", "", 0}, + {engine->engineState.running.fuel, "Fuel: actual", "", 0}, {engine->engineState.sparkDwell, "ignition dwell duration in ms", "", 0}, - {engine->engineState.dwellAngle, "ignition dwell duration as crankshaft angle", "", 0}, + {engine->engineState.dwellAngle, "ignition dwell duration", "", 0}, {engine->engineState.cltTimingCorrection, "cltTimingCorrection", "deg", 2}, {engine->engineState.timingIatCorrection, "timingIatCorrection", "deg", 2}, {engine->engineState.timingPidCorrection, "timingPidCorrection", "deg", 2}, diff --git a/firmware/controllers/actuators/idle_state_generated.h b/firmware/controllers/actuators/idle_state_generated.h index f20ddd8348..1d23a9ee48 100644 --- a/firmware/controllers/actuators/idle_state_generated.h +++ b/firmware/controllers/actuators/idle_state_generated.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Sun Oct 30 21:54:10 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -22,17 +22,19 @@ struct idle_state_s { */ percent_t baseIdlePosition = (percent_t)0; /** - * idle: iacByTpsTaper portion of idle + * idle: iacByTpsTaper portion * offset 12 */ percent_t iacByTpsTaper = (percent_t)0; /** + * idle: throttlePedalUpState * true in IDLE throttle pedal state, false if driver is touching the pedal * todo: better name for this field? * offset 16 */ int throttlePedalUpState = (int)0; /** + * idle: mightResetPid * The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold. * The throttle pedal can be pressed for a long time, making the PID data obsolete (thus the reset is required). * We set 'mightResetPid' to true only if PID was actually used (i.e. idlePid.getOutput() was called) to save some CPU resources. @@ -152,7 +154,7 @@ struct idle_state_s { */ int targetRpmAcBump = (int)0; /** - * idle: iacByRpmTaper portion of idle + * idle: iacByRpmTaper portion * offset 32 */ percent_t iacByRpmTaper = (percent_t)0; @@ -165,4 +167,4 @@ struct idle_state_s { static_assert(sizeof(idle_state_s) == 40); // end -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Sun Oct 30 21:54:10 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Tue Nov 01 20:59:53 UTC 2022 diff --git a/firmware/controllers/algo/engine_state_generated.h b/firmware/controllers/algo/engine_state_generated.h index 715362e14b..c964005512 100644 --- a/firmware/controllers/algo/engine_state_generated.h +++ b/firmware/controllers/algo/engine_state_generated.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Fri Oct 28 08:35:47 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -134,6 +134,7 @@ static_assert(sizeof(speed_density_s) == 12); // start of cranking_fuel_s struct cranking_fuel_s { /** + * Fuel: base duration * Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings. * Deprecated. Please use '1'. * TODO: maybe account for injector flow? @@ -153,7 +154,8 @@ struct cranking_fuel_s { */ float durationCoefficient = (float)0; /** - * Actual injection duration based on all above coefficients. + * Fuel: Actual injection + * duration based on all coefficients. * offset 16 */ floatms_t fuel = (floatms_t)0; @@ -185,6 +187,7 @@ struct running_fuel_s { */ floatms_t baseFuel = (floatms_t)0; /** + * Fuel: actual * Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration. * Without injector lag. * @see baseFuel @@ -253,7 +256,8 @@ struct engine_state_s { */ floatms_t sparkDwell = (floatms_t)0; /** - * ignition dwell duration as crankshaft angle + * ignition dwell duration + * as crankshaft angle * NAN if engine is stopped * See also sparkDwell * offset 104 @@ -425,4 +429,4 @@ struct engine_state_s { static_assert(sizeof(engine_state_s) == 152); // end -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Fri Oct 28 08:35:47 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Tue Nov 01 20:59:53 UTC 2022 diff --git a/firmware/controllers/algo/fuel/fuel_computer_generated.h b/firmware/controllers/algo/fuel/fuel_computer_generated.h index e5589177aa..07e1d51f89 100644 --- a/firmware/controllers/algo/fuel/fuel_computer_generated.h +++ b/firmware/controllers/algo/fuel/fuel_computer_generated.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Sat Sep 03 07:08:26 EDT 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -26,6 +26,7 @@ struct fuel_computer_s { */ float sdTcharge_coff = (float)0; /** + * SD cylinder mass * Speed-density logic: calculated air mass in one cylinder, in grams * offset 20 */ @@ -130,4 +131,4 @@ struct fuel_computer_s { static_assert(sizeof(fuel_computer_s) == 28); // end -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Sat Sep 03 07:08:26 EDT 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Tue Nov 01 20:59:53 UTC 2022 diff --git a/firmware/controllers/algo/wall_fuel_state_generated.h b/firmware/controllers/algo/wall_fuel_state_generated.h index e0b27c03c9..1b8bf18a8b 100644 --- a/firmware/controllers/algo/wall_fuel_state_generated.h +++ b/firmware/controllers/algo/wall_fuel_state_generated.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/wall_fuel_state.txt Mon Apr 18 21:50:18 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/wall_fuel_state.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -6,12 +6,14 @@ // start of wall_fuel_state_s struct wall_fuel_state_s { /** - * fuel injection time correction to account for wall wetting effect for current cycle + * fuel wallwetting injection time + * correction to account for wall wetting effect for current cycle * offset 0 */ float wallFuelCorrection = (float)0; /** - * Amount of fuel on the wall, in ms of injector open time for each injector. + * Fuel on the wall + * in ms of injector open time for each injector. * offset 4 */ floatms_t wallFuel = (floatms_t)0; @@ -19,4 +21,4 @@ struct wall_fuel_state_s { static_assert(sizeof(wall_fuel_state_s) == 8); // end -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/wall_fuel_state.txt Mon Apr 18 21:50:18 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/wall_fuel_state.txt Tue Nov 01 20:59:53 UTC 2022 diff --git a/firmware/controllers/engine_cycle/knock_controller_generated.h b/firmware/controllers/engine_cycle/knock_controller_generated.h index 7310a2161d..581de27b8a 100644 --- a/firmware/controllers/engine_cycle/knock_controller_generated.h +++ b/firmware/controllers/engine_cycle/knock_controller_generated.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/engine_cycle/knock_controller.txt Tue Aug 30 06:01:23 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/engine_cycle/knock_controller.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -6,7 +6,8 @@ // start of knock_controller_s struct knock_controller_s { /** - * Degrees retarded: larger number = more retard + * Knock Degrees retarded + * larger number = more retard * offset 0 */ angle_t m_knockRetard = (angle_t)0; @@ -26,4 +27,4 @@ struct knock_controller_s { static_assert(sizeof(knock_controller_s) == 16); // end -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/engine_cycle/knock_controller.txt Tue Aug 30 06:01:23 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/engine_cycle/knock_controller.txt Tue Nov 01 20:59:53 UTC 2022 diff --git a/firmware/controllers/generated/rusefi_generated.h b/firmware/controllers/generated/rusefi_generated.h index 2ae4a41ea6..d4021d38ef 100644 --- a/firmware/controllers/generated/rusefi_generated.h +++ b/firmware/controllers/generated/rusefi_generated.h @@ -427,7 +427,7 @@ #define GAUGE_NAME_ETB_ERROR "ETB position error" #define GAUGE_NAME_ETB_TARGET "ETB position target" #define GAUGE_NAME_FLEX "Flex Ethanol %" -#define GAUGE_NAME_FUEL_BARO_CORR "fuel: Barometric pressure correction" +#define GAUGE_NAME_FUEL_BARO_CORR "fuel: Barometric pressure mult" #define GAUGE_NAME_FUEL_BASE "fuel: base mass" #define GAUGE_NAME_FUEL_CHARGE_TEMP "fuel: Estimated charge temperature" #define GAUGE_NAME_FUEL_CLT_CORR "fuel: CLT correction" @@ -445,7 +445,7 @@ #define GAUGE_NAME_FUEL_PRESSURE_LOW "Fuel pressure (low)" #define GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS "kPa" #define GAUGE_NAME_FUEL_RUNNING "fuel: running" -#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration extra fuel ms" +#define GAUGE_NAME_FUEL_TPS_EXTRA "fuel: TPS acceleration add fuel ms" #define GAUGE_NAME_FUEL_TPS_ROC "fuel: TPS change" #define GAUGE_NAME_FUEL_TRIM "fuel: fuel trim" #define GAUGE_NAME_FUEL_TRIM_2 "fuel: fuel trim 2" @@ -1026,7 +1026,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_51012 +#define SIGNATURE_HASH snap_16528 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1298,7 +1298,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.01.all.snap_51012" +#define TS_SIGNATURE "rusEFI 2022.11.01.all.snap_16528" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/controllers/generated/signature_48way.h b/firmware/controllers/generated/signature_48way.h index 2c77f84fd8..b52084916b 100644 --- a/firmware/controllers/generated/signature_48way.h +++ b/firmware/controllers/generated/signature_48way.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_53003 -#define TS_SIGNATURE "rusEFI 2022.11.01.48way.snap_53003" +#define SIGNATURE_HASH snap_18655 +#define TS_SIGNATURE "rusEFI 2022.11.01.48way.snap_18655" diff --git a/firmware/controllers/generated/signature_all.h b/firmware/controllers/generated/signature_all.h index e38c73aa82..86731a95e6 100644 --- a/firmware/controllers/generated/signature_all.h +++ b/firmware/controllers/generated/signature_all.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_51012 -#define TS_SIGNATURE "rusEFI 2022.11.01.all.snap_51012" +#define SIGNATURE_HASH snap_16528 +#define TS_SIGNATURE "rusEFI 2022.11.01.all.snap_16528" diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index 7085526fcc..cf6d10170d 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_23080 -#define TS_SIGNATURE "rusEFI 2022.11.01.alphax-2chan.snap_23080" +#define SIGNATURE_HASH snap_56828 +#define TS_SIGNATURE "rusEFI 2022.11.01.alphax-2chan.snap_56828" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index 07cf098c3e..cc32c0cccc 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_1227 -#define TS_SIGNATURE "rusEFI 2022.11.01.alphax-4chan.snap_1227" +#define SIGNATURE_HASH snap_33567 +#define TS_SIGNATURE "rusEFI 2022.11.01.alphax-4chan.snap_33567" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index c2e833081e..a726c8ef19 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_12899 -#define TS_SIGNATURE "rusEFI 2022.11.01.atlas.snap_12899" +#define SIGNATURE_HASH snap_46519 +#define TS_SIGNATURE "rusEFI 2022.11.01.atlas.snap_46519" diff --git a/firmware/controllers/generated/signature_core8.h b/firmware/controllers/generated/signature_core8.h index ce28bffe61..ca5ef19985 100644 --- a/firmware/controllers/generated/signature_core8.h +++ b/firmware/controllers/generated/signature_core8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_38589 -#define TS_SIGNATURE "rusEFI 2022.11.01.core8.snap_38589" +#define SIGNATURE_HASH snap_4457 +#define TS_SIGNATURE "rusEFI 2022.11.01.core8.snap_4457" diff --git a/firmware/controllers/generated/signature_cypress.h b/firmware/controllers/generated/signature_cypress.h index 37afa71293..39a66dc4e7 100644 --- a/firmware/controllers/generated/signature_cypress.h +++ b/firmware/controllers/generated/signature_cypress.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH snap_51012 -#define TS_SIGNATURE "rusEFI 2022.11.01.cypress.snap_51012" +#define SIGNATURE_HASH snap_16528 +#define TS_SIGNATURE "rusEFI 2022.11.01.cypress.snap_16528" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index 42475a73e7..d182e037ac 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_51012 -#define TS_SIGNATURE "rusEFI 2022.11.01.f407-discovery.snap_51012" +#define SIGNATURE_HASH snap_16528 +#define TS_SIGNATURE "rusEFI 2022.11.01.f407-discovery.snap_16528" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index 233f5c0008..627af47b9c 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_51012 -#define TS_SIGNATURE "rusEFI 2022.11.01.f429-discovery.snap_51012" +#define SIGNATURE_HASH snap_16528 +#define TS_SIGNATURE "rusEFI 2022.11.01.f429-discovery.snap_16528" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index c34c566459..57fa575e9b 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_15232 -#define TS_SIGNATURE "rusEFI 2022.11.01.frankenso_na6.snap_15232" +#define SIGNATURE_HASH snap_48212 +#define TS_SIGNATURE "rusEFI 2022.11.01.frankenso_na6.snap_48212" diff --git a/firmware/controllers/generated/signature_harley81.h b/firmware/controllers/generated/signature_harley81.h index 9732220a26..316508e489 100644 --- a/firmware/controllers/generated/signature_harley81.h +++ b/firmware/controllers/generated/signature_harley81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_49771 -#define TS_SIGNATURE "rusEFI 2022.11.01.harley81.snap_49771" +#define SIGNATURE_HASH snap_17855 +#define TS_SIGNATURE "rusEFI 2022.11.01.harley81.snap_17855" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index 88d84c7435..4c240222dd 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_18245 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen-gm-e67.snap_18245" +#define SIGNATURE_HASH snap_49297 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen-gm-e67.snap_49297" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index 4688a10771..7e8acf326a 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_63112 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen-nb1.snap_63112" +#define SIGNATURE_HASH snap_29020 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen-nb1.snap_29020" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index 11b067b841..881bdd4bc5 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_32686 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen121nissan.snap_32686" +#define SIGNATURE_HASH snap_63610 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen121nissan.snap_63610" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index 70d742f49d..76bb83403f 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_1086 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen121vag.snap_1086" +#define SIGNATURE_HASH snap_33770 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen121vag.snap_33770" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index 5313c6efed..4512a374e1 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_47743 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen128.snap_47743" +#define SIGNATURE_HASH snap_15787 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen128.snap_15787" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index 225e02b0dc..fe676bc654 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_29036 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen154hyundai.snap_29036" +#define SIGNATURE_HASH snap_63160 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen154hyundai.snap_63160" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index 480b0f0986..9ab46672d0 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_51663 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen72.snap_51663" +#define SIGNATURE_HASH snap_19995 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen72.snap_19995" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index 3060b68105..f393b79787 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_8014 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen81.snap_8014" +#define SIGNATURE_HASH snap_39066 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen81.snap_39066" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index 02ef9b0909..19ffe49d4e 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_54408 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellen88bmw.snap_54408" +#define SIGNATURE_HASH snap_21340 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellen88bmw.snap_21340" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index 69b079f48d..590d75c72c 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_30323 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellenNA6.snap_30323" +#define SIGNATURE_HASH snap_61863 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellenNA6.snap_61863" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index df67be7035..27fe900a48 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_30380 -#define TS_SIGNATURE "rusEFI 2022.11.01.hellenNA8_96.snap_30380" +#define SIGNATURE_HASH snap_61816 +#define TS_SIGNATURE "rusEFI 2022.11.01.hellenNA8_96.snap_61816" diff --git a/firmware/controllers/generated/signature_kin.h b/firmware/controllers/generated/signature_kin.h index 7274647927..ebcc2d2ffc 100644 --- a/firmware/controllers/generated/signature_kin.h +++ b/firmware/controllers/generated/signature_kin.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH snap_25992 -#define TS_SIGNATURE "rusEFI 2022.11.01.kin.snap_25992" +#define SIGNATURE_HASH snap_57948 +#define TS_SIGNATURE "rusEFI 2022.11.01.kin.snap_57948" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index a10fd329e4..a6214c0a74 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_41028 -#define TS_SIGNATURE "rusEFI 2022.11.01.mre_f4.snap_41028" +#define SIGNATURE_HASH snap_10128 +#define TS_SIGNATURE "rusEFI 2022.11.01.mre_f4.snap_10128" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index b15db519e5..f37297e096 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_41028 -#define TS_SIGNATURE "rusEFI 2022.11.01.mre_f7.snap_41028" +#define SIGNATURE_HASH snap_10128 +#define TS_SIGNATURE "rusEFI 2022.11.01.mre_f7.snap_10128" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index 677cbbdd5e..e3fc547869 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_7842 -#define TS_SIGNATURE "rusEFI 2022.11.01.prometheus_405.snap_7842" +#define SIGNATURE_HASH snap_39286 +#define TS_SIGNATURE "rusEFI 2022.11.01.prometheus_405.snap_39286" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index a88150e678..9da820e3fd 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_7842 -#define TS_SIGNATURE "rusEFI 2022.11.01.prometheus_469.snap_7842" +#define SIGNATURE_HASH snap_39286 +#define TS_SIGNATURE "rusEFI 2022.11.01.prometheus_469.snap_39286" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index a48e969c90..04b3081763 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_50 -#define TS_SIGNATURE "rusEFI 2022.11.01.proteus_f4.snap_50" +#define SIGNATURE_HASH snap_34790 +#define TS_SIGNATURE "rusEFI 2022.11.01.proteus_f4.snap_34790" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index 089a7d9a67..a215a9bfc9 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_50 -#define TS_SIGNATURE "rusEFI 2022.11.01.proteus_f7.snap_50" +#define SIGNATURE_HASH snap_34790 +#define TS_SIGNATURE "rusEFI 2022.11.01.proteus_f7.snap_34790" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index 875ac41d11..0f600d5ed9 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_50 -#define TS_SIGNATURE "rusEFI 2022.11.01.proteus_h7.snap_50" +#define SIGNATURE_HASH snap_34790 +#define TS_SIGNATURE "rusEFI 2022.11.01.proteus_h7.snap_34790" diff --git a/firmware/controllers/generated/signature_subaru_eg33_f7.h b/firmware/controllers/generated/signature_subaru_eg33_f7.h index 67e418c3a8..b26a346243 100644 --- a/firmware/controllers/generated/signature_subaru_eg33_f7.h +++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_7838 -#define TS_SIGNATURE "rusEFI 2022.11.01.subaru_eg33_f7.snap_7838" +#define SIGNATURE_HASH snap_39242 +#define TS_SIGNATURE "rusEFI 2022.11.01.subaru_eg33_f7.snap_39242" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index 26d013f75f..fbb8d373a1 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_2320 -#define TS_SIGNATURE "rusEFI 2022.11.01.tdg-pdm8.snap_2320" +#define SIGNATURE_HASH snap_36548 +#define TS_SIGNATURE "rusEFI 2022.11.01.tdg-pdm8.snap_36548" diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index 1919118713..adf5446178 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.all.snap_51012" + signature = "rusEFI 2022.11.01.all.snap_16528" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.all.snap_51012" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.all.snap_16528" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:52:11 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:43 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_48way.ini b/firmware/tunerstudio/generated/rusefi_48way.ini index 59c05bf440..9d67256258 100644 --- a/firmware/tunerstudio/generated/rusefi_48way.ini +++ b/firmware/tunerstudio/generated/rusefi_48way.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.48way.snap_53003" + signature = "rusEFI 2022.11.01.48way.snap_18655" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.48way.snap_53003" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.48way.snap_18655" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:50 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:26 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index 38f4d98dd2..921bdae955 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.alphax-2chan.snap_23080" + signature = "rusEFI 2022.11.01.alphax-2chan.snap_56828" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.alphax-2chan.snap_23080" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.alphax-2chan.snap_56828" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:17 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 20:59:59 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index 78ac277dde..1df88f0b84 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.alphax-4chan.snap_1227" + signature = "rusEFI 2022.11.01.alphax-4chan.snap_33567" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.alphax-4chan.snap_1227" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.alphax-4chan.snap_33567" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:19 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:01 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index 36ec1953f5..7070387ea4 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.atlas.snap_12899" + signature = "rusEFI 2022.11.01.atlas.snap_46519" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.atlas.snap_12899" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.atlas.snap_46519" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:52:07 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:40 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_core8.ini b/firmware/tunerstudio/generated/rusefi_core8.ini index fcc5d21dbb..82e895aac1 100644 --- a/firmware/tunerstudio/generated/rusefi_core8.ini +++ b/firmware/tunerstudio/generated/rusefi_core8.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.core8.snap_38589" + signature = "rusEFI 2022.11.01.core8.snap_4457" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.core8.snap_38589" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.core8.snap_4457" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:48 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:24 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_cypress.ini b/firmware/tunerstudio/generated/rusefi_cypress.ini index aaa86ec076..286badbbc3 100644 --- a/firmware/tunerstudio/generated/rusefi_cypress.ini +++ b/firmware/tunerstudio/generated/rusefi_cypress.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.cypress.snap_51012" + signature = "rusEFI 2022.11.01.cypress.snap_16528" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.cypress.snap_51012" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.cypress.snap_16528" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Tue Nov 01 14:51:13 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Tue Nov 01 20:59:56 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index 31ac77c829..996a2e2548 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.f407-discovery.snap_51012" + signature = "rusEFI 2022.11.01.f407-discovery.snap_16528" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.f407-discovery.snap_51012" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.f407-discovery.snap_16528" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:52:04 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:37 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index 7583dbc98d..2d0d4d7d08 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.f429-discovery.snap_51012" + signature = "rusEFI 2022.11.01.f429-discovery.snap_16528" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.f429-discovery.snap_51012" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.f429-discovery.snap_16528" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:52:05 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:38 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index b1269cf79d..19e4eb78cd 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.frankenso_na6.snap_15232" + signature = "rusEFI 2022.11.01.frankenso_na6.snap_48212" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.frankenso_na6.snap_15232" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.frankenso_na6.snap_48212" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:52 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:28 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_harley81.ini b/firmware/tunerstudio/generated/rusefi_harley81.ini index 70e7d77e46..8d6d9f4c5a 100644 --- a/firmware/tunerstudio/generated/rusefi_harley81.ini +++ b/firmware/tunerstudio/generated/rusefi_harley81.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.harley81.snap_49771" + signature = "rusEFI 2022.11.01.harley81.snap_17855" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.harley81.snap_49771" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.harley81.snap_17855" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:21 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:02 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index 4b90619e0b..f9032125a1 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen-gm-e67.snap_18245" + signature = "rusEFI 2022.11.01.hellen-gm-e67.snap_49297" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen-gm-e67.snap_18245" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen-gm-e67.snap_49297" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:38 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:16 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index 5164124b8f..7dcb9aa428 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen-nb1.snap_63112" + signature = "rusEFI 2022.11.01.hellen-nb1.snap_29020" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen-nb1.snap_63112" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen-nb1.snap_29020" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:37 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:15 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index a5ca8ab220..0224125e64 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen121nissan.snap_32686" + signature = "rusEFI 2022.11.01.hellen121nissan.snap_63610" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen121nissan.snap_32686" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen121nissan.snap_63610" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:27 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:07 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index ae0053b951..2340b75431 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen121vag.snap_1086" + signature = "rusEFI 2022.11.01.hellen121vag.snap_33770" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen121vag.snap_1086" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen121vag.snap_33770" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:25 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:05 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini index 319b120314..23b18d115a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen128.snap_47743" + signature = "rusEFI 2022.11.01.hellen128.snap_15787" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen128.snap_47743" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen128.snap_15787" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:23 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:04 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index 5e37000f3b..f555e2ae34 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen154hyundai.snap_29036" + signature = "rusEFI 2022.11.01.hellen154hyundai.snap_63160" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen154hyundai.snap_29036" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen154hyundai.snap_63160" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:29 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:08 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index 94adb50928..53237cc47b 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen72.snap_51663" + signature = "rusEFI 2022.11.01.hellen72.snap_19995" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen72.snap_51663" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen72.snap_19995" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:33 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:12 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index 7df7bd46ba..c69fdf04d2 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen81.snap_8014" + signature = "rusEFI 2022.11.01.hellen81.snap_39066" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen81.snap_8014" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen81.snap_39066" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:34 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:13 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index f90d2ba597..ca802efc9f 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellen88bmw.snap_54408" + signature = "rusEFI 2022.11.01.hellen88bmw.snap_21340" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellen88bmw.snap_54408" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellen88bmw.snap_21340" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:31 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:10 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index dc6e5bed62..584a87885b 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellenNA6.snap_30323" + signature = "rusEFI 2022.11.01.hellenNA6.snap_61863" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellenNA6.snap_30323" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellenNA6.snap_61863" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:41 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:18 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index 9d9cfec94e..a5db944e22 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.hellenNA8_96.snap_30380" + signature = "rusEFI 2022.11.01.hellenNA8_96.snap_61816" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.hellenNA8_96.snap_30380" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.hellenNA8_96.snap_61816" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:42 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:20 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_kin.ini b/firmware/tunerstudio/generated/rusefi_kin.ini index 9327f8f546..4b7c7a92c0 100644 --- a/firmware/tunerstudio/generated/rusefi_kin.ini +++ b/firmware/tunerstudio/generated/rusefi_kin.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.kin.snap_25992" + signature = "rusEFI 2022.11.01.kin.snap_57948" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.kin.snap_25992" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.kin.snap_57948" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Tue Nov 01 14:51:11 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Tue Nov 01 20:59:54 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index 428f79238b..3d5c329bf1 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.mre_f4.snap_41028" + signature = "rusEFI 2022.11.01.mre_f4.snap_10128" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.mre_f4.snap_41028" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.mre_f4.snap_10128" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:46 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:23 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index 43d5a39e32..4aa70ef1a1 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.mre_f7.snap_41028" + signature = "rusEFI 2022.11.01.mre_f7.snap_10128" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.mre_f7.snap_41028" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.mre_f7.snap_10128" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:44 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:21 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index fa06a46bce..1df32b2f87 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.prometheus_405.snap_7842" + signature = "rusEFI 2022.11.01.prometheus_405.snap_39286" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.prometheus_405.snap_7842" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.prometheus_405.snap_39286" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:56 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:31 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index 732cb3bd45..bf59da3070 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.prometheus_469.snap_7842" + signature = "rusEFI 2022.11.01.prometheus_469.snap_39286" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.prometheus_469.snap_7842" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.prometheus_469.snap_39286" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:54 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:29 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index ce7bfae49f..0cd4f54492 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.proteus_f4.snap_50" + signature = "rusEFI 2022.11.01.proteus_f4.snap_34790" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.proteus_f4.snap_50" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.proteus_f4.snap_34790" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:52:00 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:34 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index 9188927828..ac0f6b72d7 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.proteus_f7.snap_50" + signature = "rusEFI 2022.11.01.proteus_f7.snap_34790" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.proteus_f7.snap_50" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.proteus_f7.snap_34790" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:58 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:32 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index 52219ca311..4ef103da36 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.proteus_h7.snap_50" + signature = "rusEFI 2022.11.01.proteus_h7.snap_34790" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.proteus_h7.snap_50" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.proteus_h7.snap_34790" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:52:02 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:35 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index b4a7a1cd88..4660058568 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.subaru_eg33_f7.snap_7838" + signature = "rusEFI 2022.11.01.subaru_eg33_f7.snap_39242" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.subaru_eg33_f7.snap_7838" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.subaru_eg33_f7.snap_39242" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Tue Nov 01 14:51:15 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Tue Nov 01 20:59:57 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index 7e8c9cd5dc..740e272e88 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.01.tdg-pdm8.snap_2320" + signature = "rusEFI 2022.11.01.tdg-pdm8.snap_36548" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.11.01.tdg-pdm8.snap_2320" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.11.01.tdg-pdm8.snap_36548" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:52:09 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:41 UTC 2022 pageSize = 22800 page = 1 @@ -4434,7 +4434,7 @@ gaugeCategory = Fueling ;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld fuelCutReasonGauge = fuelCutReason,"Fuel Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 tChargeGauge = tCharge, "fuel: Estimated charge temperature", "C", -40, 140, -15, 1, 95, 110, 1, 1 - baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure correction", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 + baroCorrectionGauge = baroCorrection,"fuel: Barometric pressure mult", "ratio", 0.5, 1.5, 0.6, 0.7, 1.3, 1.4, 1, 1 crankingFuelGauge = crankingFuelMs, "fuel: cranking", "mg", 0, 100, 0, 0, 100, 100, 3, 1 iatCorrectionGauge = running_intakeTemperatureCoefficient, "fuel: IAT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 cltCorrectionGauge = running_coolantTemperatureCoefficient, "fuel: CLT correction", "mult", 0, 3, 0, 0, 3, 3, 2, 2 @@ -4704,7 +4704,7 @@ entry = wallFuelCorrection, "fuel: wall correction", float, "%.3f" entry = revolutionCounterSinceStart, "revolutionCounterSinceStart", int, "%d" entry = deltaTps, "fuel: TPS change", float, "%.3f" entry = canReadCounter, "canReadCounter", int, "%d" -entry = tpsAccelFuel, "fuel: TPS acceleration extra fuel ms", float, "%.3f" +entry = tpsAccelFuel, "fuel: TPS acceleration add fuel ms", float, "%.3f" entry = ignitionAdvance, "timing", float, "%.3f" entry = sparkDwellValue, "dwell: coil charge time", float, "%.3f" entry = coilDutyCycle, "dwell: coil duty cycle", float, "%.3f" @@ -4946,7 +4946,7 @@ entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" entry = mafMeasured2, "MAF sensor 2", float, "%.3f" -entry = m_knockRetard, "Degrees retarded: larger number = more retard", float, "%.3f" +entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" entry = m_maximumRetard, "m_maximumRetard", float, "%.3f" @@ -4966,7 +4966,7 @@ entry = targetLambda, "targetLambda", float, "%.3f" entry = stoichiometricRatio, "stoichiometricRatio", float, "%.3f" entry = targetAFR, "targetAFR", float, "%.3f" entry = sdTcharge_coff, "sdTcharge_coff", float, "%.3f" -entry = sdAirMassInOneCylinder, "Speed-density logic: calculated air mass in one cylinder, in grams", float, "%.3f" +entry = sdAirMassInOneCylinder, "SD cylinder mass", float, "%.3f" entry = sdIsTChargeAirModel, "sdIsTChargeAirModel", int, "%d" entry = retardThresholdRpm, "retardThresholdRpm", int, "%d" entry = combinedConditions, "combinedConditions", int, "%d" @@ -5030,20 +5030,20 @@ entry = tpsVoltageMCU, "tpsVoltageMCU", float, "%.3f" entry = tpsVoltageBoard, "tpsVoltageBoard", float, "%.3f" entry = currentBaroCorrectedVE, "currentBaroCorrectedVE", float, "%.3f" entry = injectorFlowCorrection, "injectorFlowCorrection", float, "%.3f" -entry = baroCorrection, "fuel: Barometric pressure correction", float, "%.3f" -entry = cranking_baseFuel, "Duration of injection, in ms. During cranking we do not account for injector flow, so if you change injectors you would need to change settings.", float, "%.3f" +entry = baroCorrection, "fuel: Barometric pressure mult", float, "%.3f" +entry = cranking_baseFuel, "Fuel: base duration", float, "%.3f" entry = cranking_coolantTemperatureCoefficient, "cranking_coolantTemperatureCoefficient", float, "%.3f" entry = cranking_tpsCoefficient, "cranking_tpsCoefficient", float, "%.3f" entry = cranking_durationCoefficient, "cranking_durationCoefficient", float, "%.3f" -entry = cranking_fuel, "Actual injection duration based on all above coefficients.", float, "%.3f" +entry = cranking_fuel, "Fuel: Actual injection", float, "%.3f" entry = running_postCrankingFuelCorrection, "running_postCrankingFuelCorrection", float, "%.3f" entry = running_intakeTemperatureCoefficient, "fuel: IAT correction", float, "%.3f" entry = running_coolantTemperatureCoefficient, "fuel: CLT correction", float, "%.3f" entry = running_timeSinceCrankingInSecs, "running_timeSinceCrankingInSecs", float, "%.3f" entry = running_baseFuel, "running_baseFuel", float, "%.3f" -entry = running_fuel, "Actual injection duration with CLT, IAT and TPS acceleration corrections per cycle, as squirt duration.", float, "%.3f" +entry = running_fuel, "Fuel: actual", float, "%.3f" entry = sparkDwell, "ignition dwell duration in ms", float, "%.3f" -entry = dwellAngle, "ignition dwell duration as crankshaft angle", float, "%.3f" +entry = dwellAngle, "ignition dwell duration", float, "%.3f" entry = cltTimingCorrection, "cltTimingCorrection", float, "%.3f" entry = timingIatCorrection, "timingIatCorrection", float, "%.3f" entry = timingPidCorrection, "timingPidCorrection", float, "%.3f" @@ -5100,14 +5100,14 @@ entry = vvtCounter, "vvtCounter", int, "%d" entry = camResyncCounter, "camResyncCounter", int, "%d" entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = m_hasSynchronizedPhase, "m_hasSynchronizedPhase", int, "%d" -entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" -entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" +entry = wallFuelCorrection, "fuel wallwetting injection time", float, "%.3f" +entry = wallFuel, "Fuel on the wall", float, "%.3f" entry = idleState, "idleState", int, "%d" entry = currentIdlePosition, "idle: current position", float, "%.3f" entry = baseIdlePosition, "idle: base value", float, "%.3f" -entry = iacByTpsTaper, "idle: iacByTpsTaper portion of idle", float, "%.3f" -entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" -entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" +entry = iacByTpsTaper, "idle: iacByTpsTaper portion", float, "%.3f" +entry = throttlePedalUpState, "idle: throttlePedalUpState", int, "%d" +entry = mightResetPid, "idle: mightResetPid", int, "%d" entry = shouldResetPid, "idle: shouldResetPid", int, "%d" entry = wasResetPid, "idle: wasResetPid", int, "%d" entry = mustResetPid, "idle: mustResetPid", int, "%d" @@ -5126,7 +5126,7 @@ entry = isVerboseIAC, "isVerboseIAC", int, "%d" entry = isIdleCoasting, "idle: coasting", int, "%d" entry = targetRpmByClt, "idle: target by CLT", int, "%d" entry = targetRpmAcBump, "idle: A/C bump", int, "%d" -entry = iacByRpmTaper, "idle: iacByRpmTaper portion of idle", float, "%.3f" +entry = iacByRpmTaper, "idle: iacByRpmTaper portion", float, "%.3f" entry = luaAdd, "idle: Lua Adder", float, "%.3f" entry = baseDwell, "baseDwell", float, "%.3f" entry = dwellVoltageCorrection, "dwellVoltageCorrection", float, "%.3f" diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/AcControl.java b/java_console/models/src/main/java/com/rusefi/config/generated/AcControl.java index 58b6378365..6fe8e00999 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/AcControl.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/AcControl.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/ac_control.txt Wed Oct 26 20:53:56 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/ac_control.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -150,7 +150,7 @@ public class AcControl { public static final String GAUGE_NAME_ETB_ERROR = "ETB position error"; public static final String GAUGE_NAME_ETB_TARGET = "ETB position target"; public static final String GAUGE_NAME_FLEX = "Flex Ethanol %"; - public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure correction"; + public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure mult"; public static final String GAUGE_NAME_FUEL_BASE = "fuel: base mass"; public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature"; public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction"; @@ -168,7 +168,7 @@ public class AcControl { public static final String GAUGE_NAME_FUEL_PRESSURE_LOW = "Fuel pressure (low)"; public static final String GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS = "kPa"; public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running"; - public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms"; + public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration add fuel ms"; public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change"; public static final String GAUGE_NAME_FUEL_TRIM = "fuel: fuel trim"; public static final String GAUGE_NAME_FUEL_TRIM_2 = "fuel: fuel trim 2"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/BoostControl.java b/java_console/models/src/main/java/com/rusefi/config/generated/BoostControl.java index 52d2d89d66..fdf05b037b 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/BoostControl.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/BoostControl.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/boost_control.txt Wed Oct 26 20:53:56 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/boost_control.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -150,7 +150,7 @@ public class BoostControl { public static final String GAUGE_NAME_ETB_ERROR = "ETB position error"; public static final String GAUGE_NAME_ETB_TARGET = "ETB position target"; public static final String GAUGE_NAME_FLEX = "Flex Ethanol %"; - public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure correction"; + public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure mult"; public static final String GAUGE_NAME_FUEL_BASE = "fuel: base mass"; public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature"; public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction"; @@ -168,7 +168,7 @@ public class BoostControl { public static final String GAUGE_NAME_FUEL_PRESSURE_LOW = "Fuel pressure (low)"; public static final String GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS = "kPa"; public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running"; - public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms"; + public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration add fuel ms"; public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change"; public static final String GAUGE_NAME_FUEL_TRIM = "fuel: fuel trim"; public static final String GAUGE_NAME_FUEL_TRIM_2 = "fuel: fuel trim 2"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/EngineState.java b/java_console/models/src/main/java/com/rusefi/config/generated/EngineState.java index f00850a587..3192dd340b 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/EngineState.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/EngineState.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Wed Oct 26 20:53:56 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -150,7 +150,7 @@ public class EngineState { public static final String GAUGE_NAME_ETB_ERROR = "ETB position error"; public static final String GAUGE_NAME_ETB_TARGET = "ETB position target"; public static final String GAUGE_NAME_FLEX = "Flex Ethanol %"; - public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure correction"; + public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure mult"; public static final String GAUGE_NAME_FUEL_BASE = "fuel: base mass"; public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature"; public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction"; @@ -168,7 +168,7 @@ public class EngineState { public static final String GAUGE_NAME_FUEL_PRESSURE_LOW = "Fuel pressure (low)"; public static final String GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS = "kPa"; public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running"; - public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms"; + public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration add fuel ms"; public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change"; public static final String GAUGE_NAME_FUEL_TRIM = "fuel: fuel trim"; public static final String GAUGE_NAME_FUEL_TRIM_2 = "fuel: fuel trim 2"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index 2b0d9222b8..ca0491fb30 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 14:52:15 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Tue Nov 01 21:00:45 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -410,7 +410,7 @@ public class Fields { public static final String GAUGE_NAME_ETB_ERROR = "ETB position error"; public static final String GAUGE_NAME_ETB_TARGET = "ETB position target"; public static final String GAUGE_NAME_FLEX = "Flex Ethanol %"; - public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure correction"; + public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure mult"; public static final String GAUGE_NAME_FUEL_BASE = "fuel: base mass"; public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature"; public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction"; @@ -428,7 +428,7 @@ public class Fields { public static final String GAUGE_NAME_FUEL_PRESSURE_LOW = "Fuel pressure (low)"; public static final String GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS = "kPa"; public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running"; - public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms"; + public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration add fuel ms"; public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change"; public static final String GAUGE_NAME_FUEL_TRIM = "fuel: fuel trim"; public static final String GAUGE_NAME_FUEL_TRIM_2 = "fuel: fuel trim 2"; @@ -1180,7 +1180,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI 2022.11.01.all.snap_51012"; + public static final String TS_SIGNATURE = "rusEFI 2022.11.01.all.snap_16528"; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't'; public static final int TS_TOTAL_OUTPUT_SIZE = 1280; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/FuelComputer.java b/java_console/models/src/main/java/com/rusefi/config/generated/FuelComputer.java index 8f4b3be7e2..a145509f08 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/FuelComputer.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/FuelComputer.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Wed Oct 26 20:53:55 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -150,7 +150,7 @@ public class FuelComputer { public static final String GAUGE_NAME_ETB_ERROR = "ETB position error"; public static final String GAUGE_NAME_ETB_TARGET = "ETB position target"; public static final String GAUGE_NAME_FLEX = "Flex Ethanol %"; - public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure correction"; + public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure mult"; public static final String GAUGE_NAME_FUEL_BASE = "fuel: base mass"; public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature"; public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction"; @@ -168,7 +168,7 @@ public class FuelComputer { public static final String GAUGE_NAME_FUEL_PRESSURE_LOW = "Fuel pressure (low)"; public static final String GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS = "kPa"; public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running"; - public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms"; + public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration add fuel ms"; public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change"; public static final String GAUGE_NAME_FUEL_TRIM = "fuel: fuel trim"; public static final String GAUGE_NAME_FUEL_TRIM_2 = "fuel: fuel trim 2"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/TriggerState.java b/java_console/models/src/main/java/com/rusefi/config/generated/TriggerState.java index fac4d69323..3d369729ec 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/TriggerState.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/TriggerState.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state.txt Wed Oct 26 20:53:56 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -150,7 +150,7 @@ public class TriggerState { public static final String GAUGE_NAME_ETB_ERROR = "ETB position error"; public static final String GAUGE_NAME_ETB_TARGET = "ETB position target"; public static final String GAUGE_NAME_FLEX = "Flex Ethanol %"; - public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure correction"; + public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure mult"; public static final String GAUGE_NAME_FUEL_BASE = "fuel: base mass"; public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature"; public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction"; @@ -168,7 +168,7 @@ public class TriggerState { public static final String GAUGE_NAME_FUEL_PRESSURE_LOW = "Fuel pressure (low)"; public static final String GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS = "kPa"; public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running"; - public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms"; + public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration add fuel ms"; public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change"; public static final String GAUGE_NAME_FUEL_TRIM = "fuel: fuel trim"; public static final String GAUGE_NAME_FUEL_TRIM_2 = "fuel: fuel trim 2"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/TriggerStatePrimary.java b/java_console/models/src/main/java/com/rusefi/config/generated/TriggerStatePrimary.java index 44590c288a..22b4439d19 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/TriggerStatePrimary.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/TriggerStatePrimary.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state_primary.txt Wed Oct 26 20:53:56 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state_primary.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -150,7 +150,7 @@ public class TriggerStatePrimary { public static final String GAUGE_NAME_ETB_ERROR = "ETB position error"; public static final String GAUGE_NAME_ETB_TARGET = "ETB position target"; public static final String GAUGE_NAME_FLEX = "Flex Ethanol %"; - public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure correction"; + public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure mult"; public static final String GAUGE_NAME_FUEL_BASE = "fuel: base mass"; public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature"; public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction"; @@ -168,7 +168,7 @@ public class TriggerStatePrimary { public static final String GAUGE_NAME_FUEL_PRESSURE_LOW = "Fuel pressure (low)"; public static final String GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS = "kPa"; public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running"; - public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms"; + public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration add fuel ms"; public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change"; public static final String GAUGE_NAME_FUEL_TRIM = "fuel: fuel trim"; public static final String GAUGE_NAME_FUEL_TRIM_2 = "fuel: fuel trim 2"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/TsOutputs.java b/java_console/models/src/main/java/com/rusefi/config/generated/TsOutputs.java index 0f3fd6dffa..5b6bb706fc 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/TsOutputs.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/TsOutputs.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) console/binary/output_channels.txt Wed Oct 26 20:53:55 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) console/binary/output_channels.txt Tue Nov 01 20:59:53 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -150,7 +150,7 @@ public class TsOutputs { public static final String GAUGE_NAME_ETB_ERROR = "ETB position error"; public static final String GAUGE_NAME_ETB_TARGET = "ETB position target"; public static final String GAUGE_NAME_FLEX = "Flex Ethanol %"; - public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure correction"; + public static final String GAUGE_NAME_FUEL_BARO_CORR = "fuel: Barometric pressure mult"; public static final String GAUGE_NAME_FUEL_BASE = "fuel: base mass"; public static final String GAUGE_NAME_FUEL_CHARGE_TEMP = "fuel: Estimated charge temperature"; public static final String GAUGE_NAME_FUEL_CLT_CORR = "fuel: CLT correction"; @@ -168,7 +168,7 @@ public class TsOutputs { public static final String GAUGE_NAME_FUEL_PRESSURE_LOW = "Fuel pressure (low)"; public static final String GAUGE_NAME_FUEL_PRESSURE_LOW_UNITS = "kPa"; public static final String GAUGE_NAME_FUEL_RUNNING = "fuel: running"; - public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration extra fuel ms"; + public static final String GAUGE_NAME_FUEL_TPS_EXTRA = "fuel: TPS acceleration add fuel ms"; public static final String GAUGE_NAME_FUEL_TPS_ROC = "fuel: TPS change"; public static final String GAUGE_NAME_FUEL_TRIM = "fuel: fuel trim"; public static final String GAUGE_NAME_FUEL_TRIM_2 = "fuel: fuel trim 2";