rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

improve etb & pedal dialogs (#1348) 

* simplify etb dialog

* put back pid limits

* add note

* pedal too
This commit is contained in:
Matthew Kennedy 2020-04-22 17:24:47 -07:00 committed by GitHub
parent b7e4c52dcb
commit 5e34323d0f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 24 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

48
firmware/tunerstudio/rusefi.input
View File

@ -1723,12 +1723,19 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "TPS low value detection threshold", tpsErrorDetectionTooLow, {tps1_1AdcChannel != 16}
field = "TPS high value detection threshold", tpsErrorDetectionTooHigh, {tps1_1AdcChannel != 16}
dialog = pedalSensor, "Accelerator pedal"
dialog = pedalSensorLeft, "Accelerator pedal"
field = "Accelerator position sensor", throttlePedalPositionAdcChannel
field = "Up voltage", throttlePedalUpVoltage
field = "Down (WOT) voltage", throttlePedalWOTVoltage
field = "Accelerator position 2nd sensor", throttlePedalPositionSecondAdcChannel
field = "Up voltage", throttlePedalUpVoltage
field = "Down (WOT) voltage", throttlePedalWOTVoltage
dialog = pedalGauges
gauge = pedalPositionGauge
gauge = rawPpsPrimaryGauge
dialog = pedalSensor, "Accelerator pedal", border
panel = pedalSensorLeft, West
panel = pedalGauges, East
dialog = mc33Dialog, "GDI Dreams"
field = mc33816_cs, mc33816_cs
@ -2733,44 +2740,37 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "pFactor", etb_pFactor, {throttlePedalPositionAdcChannel != 16}
field = "iFactor", etb_iFactor, {throttlePedalPositionAdcChannel != 16}
field = "dFactor", etb_dFactor, {throttlePedalPositionAdcChannel != 16}
field = "offset", etb_offset, {throttlePedalPositionAdcChannel != 16}
field = "control period", etb_periodMs, {throttlePedalPositionAdcChannel != 16}
field = "pid min", etb_minValue, {throttlePedalPositionAdcChannel != 16}
field = "pid max", etb_maxValue, {throttlePedalPositionAdcChannel != 16}
field = "iTermMin", etb_iTermMin, {throttlePedalPositionAdcChannel != 16}
field = "iTermMax", etb_iTermMax, {throttlePedalPositionAdcChannel != 16}
dialog = etbIdleDialog, "ETB Idle"
field = "use ETB for idle", useETBforIdleControl
field = "ETB idle maximum angle", etbIdleThrottleRange
dialog = etbDialogLeft
field = "https://rusefi.com/s/etb"
field = "Detailed status in console", isVerboseETB
field = "Pause ETB control", pauseEtbControl
field = "Throttle Pedal Up", throttlePedalUpVoltage
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage
field = etbCalibrationOnStart, etbCalibrationOnStart
field = "TPS#2 min", tps2Min, { tps2_1AdcChannel != 16 }
field = "TPS#2 max", tps2Max, { tps2_1AdcChannel != 16 }
; we need the term about stepper idle in here, because there's a bug in TS that you can't have different visibility
; criteria for the same panel when used in multiple places
panel = hbridgeHardware, { throttlePedalPositionAdcChannel != 16 || useStepperIdle && useHbridges }
panel = etbPidDialog
dialog = etbAutotune, "PID Autotune"
field = "!Set debug mode below to 'ETB Autotune' to show results"
field = "Debug mode", debugMode
commandButton = "ETB PID Autotune", cmd_etb_autotune
dialog = etbDialogRight
field = "!https://rusefi.com/s/debugmode"
field = "Neutral Position", etbNeutralPosition
field = "Debug mode", debugMode
field = "use ETB for idle", useETBforIdleControl
field = "ETB idle maximum angle", etbIdleThrottleRange
field = "Press buttons to calibrate sensors"
field = "You would have to remove air filter to move throttle manually"
commandButton = "TPS#1 closed position", cmd_calibrate_tps_1_closed
commandButton = "TPS#1 wide open position", cmd_calibrate_tps_1_wot
field = "Not many vehicles have two throttle bodies but some do"
commandButton = "TPS#2 closed position", cmd_calibrate_tps_2_closed
commandButton = "TPS#2 wide open position", cmd_calibrate_tps_2_wot
commandButton = "Pedal Up", cmd_calibrate_pedal_up
commandButton = "Pedal Down", cmd_calibrate_pedal_down
commandButton = "ETB PID Autotune", cmd_etb_autotune
panel = etbIdleDialog
panel = etbPidDialog
panel = etbAutotune
; Neutral position handling not yet implemented!
;field = "Neutral Position", etbNeutralPosition
dialog = etbDialog, "Electronic Throttle Body (beta)", border
topicHelp = "etbHelp"