notes

misc/atollic_truestudio_notes.txt

@@ -0,0 +1,33 @@
+Debug Configurations Settings Window won't close
+
+mkdir -p firmware/.settings
+touch firmware/.settings/com.atollic.truestudio.debug.hardware_device.prefs
+
+https://forum.atollic.com/viewtopic.php?t=1015
+
+
+target software startup script
+
+#start
+
+# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers
+# Uncomment next line, 2=32 bit, 1=16 bit and 0=8 bit parallelism mode
+monitor flash set_parallelism_mode 2
+# Set character encoding
+set host-charset CP1252
+set target-charset CP1252
+# Reset to known state
+monitor reset
+# Load the program executable
+load
+# Reset the chip to get to a known state. Remove "monitor reset" command
+#  if the code is not located at default address and does not run by reset.
+monitor reset
+# Enable Debug connection in low power modes (DBGMCU->CR)
+set *0xE0042004 = (*0xE0042004) | 0x7
+# Set a breakpoint at main().
+tbreak main
+# Run to the breakpoint.
+continue
+
+#end