rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Auto-generated configs and docs

This commit is contained in:
GitHub build-firmware Action 2022-01-28 06:04:57 +00:00
parent e2a44063ec
commit 7311f25467
62 changed files with 1806 additions and 349 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
firmware/config/boards/hellen/cypress/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Thu Jan 27 19:25:52 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:59 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2448,8 +2448,9 @@ struct engine_configuration_s {
offset 1272 bit 2 */
bool isCylinderCleanupEnabled : 1 {};
/**
* Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?
offset 1272 bit 3 */
bool unused1476b3 : 1 {};
bool complexWallModel : 1 {};
/**
offset 1272 bit 4 */
bool alwaysInstantRpm : 1 {};
@ -4062,16 +4063,36 @@ struct engine_configuration_s {
*/
uint16_t unusedShort;
/**
* need 4 byte alignment
units
deg C
* offset 4642
*/
uint8_t alignmentFill_at_4642[2];
int8_t wwCltBins[WWAE_TABLE_SIZE];
/**
* offset 4650
*/
scaled_channel<uint8_t, 100, 1> wwTauCltValues[WWAE_TABLE_SIZE];
/**
* offset 4658
*/
scaled_channel<uint8_t, 100, 1> wwBetaCltValues[WWAE_TABLE_SIZE];
/**
kPa
* offset 4666
*/
int8_t wwMapBins[WWAE_TABLE_SIZE];
/**
* offset 4674
*/
scaled_channel<uint8_t, 100, 1> wwTauMapValues[WWAE_TABLE_SIZE];
/**
* offset 4682
*/
scaled_channel<uint8_t, 100, 1> wwBetaMapValues[WWAE_TABLE_SIZE];
/**
units
* offset 4644
* offset 4690
*/
int mainUnusedEnd[94];
uint8_t mainUnusedEnd[330];
/** total size 5020*/
};
@ -4490,4 +4511,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Thu Jan 27 19:25:52 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:59 UTC 2022

16
firmware/config/boards/hellen/cypress/config/controllers/algo/rusefi_generated.h
View File

@ -79,7 +79,6 @@
#define alignmentFill_at_1847_offset 1847
#define alignmentFill_at_1873_offset 1873
#define alignmentFill_at_4007_offset 4007
#define alignmentFill_at_4642_offset 4642
#define alignmentFill_at_62_offset 62
#define alternatorControl_dFactor_offset 1492
#define alternatorControl_iFactor_offset 1488
@ -585,6 +584,7 @@
#define coastingFuelCutVssHigh_offset 1690
#define coastingFuelCutVssLow_offset 1689
#define communicationLedPin_offset 1572
#define complexWallModel_offset 1272
#define COMPOSITE_DATA_LENGTH 2500
#define COMPOSITE_DATA_LENGTH_HALF 1250
#define COMPOSITE_PACKET_COUNT 500
@ -1612,7 +1612,7 @@
#define MAIN_HELP_URL "http://www.rusefi.com/"
#define mainRelayPin_offset 714
#define mainRelayPinMode_offset 756
#define mainUnusedEnd_offset 4644
#define mainUnusedEnd_offset 4690
#define malfunctionIndicatorPin_offset 668
#define malfunctionIndicatorPinMode_offset 669
#define manIdlePosition_offset 616
@ -1894,7 +1894,7 @@
#define show_test_presets true
#define showHumanReadableWarning_offset 896
#define showSdCardWarning_offset 164
#define SIGNATURE_HASH 1844843211
#define SIGNATURE_HASH 40759209
#define silentTriggerError_offset 1260
#define slowAdcAlpha_offset 1712
#define sparkDwellRpmBins_offset 54
@ -2419,7 +2419,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen_cypress.1844843211"
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen_cypress.40759209"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'
@ -2458,7 +2458,6 @@
#define unused1130_offset 1740
#define unused1476b19_offset 1272
#define unused1476b20_offset 1272
#define unused1476b3_offset 1272
#define unused1476b8_offset 1272
#define unused1689_offset 1691
#define unused1740b0_offset 1740
@ -2626,5 +2625,12 @@
#define wastegatePositionSensor_offset 1751
#define wboHeaterPin_offset 681
#define wheelDiameter_offset 722
#define WWAE_TABLE_SIZE 8
#define wwaeBeta_offset 1568
#define wwaeTau_offset 1480
#define wwBetaCltValues_offset 4658
#define wwBetaMapValues_offset 4682
#define wwCltBins_offset 4642
#define wwMapBins_offset 4666
#define wwTauCltValues_offset 4650
#define wwTauMapValues_offset 4674

37
firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Thu Jan 27 19:25:50 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:58 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2448,8 +2448,9 @@ struct engine_configuration_s {
offset 1272 bit 2 */
bool isCylinderCleanupEnabled : 1 {};
/**
* Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?
offset 1272 bit 3 */
bool unused1476b3 : 1 {};
bool complexWallModel : 1 {};
/**
offset 1272 bit 4 */
bool alwaysInstantRpm : 1 {};
@ -4056,16 +4057,36 @@ struct engine_configuration_s {
*/
uint16_t unusedShort;
/**
* need 4 byte alignment
units
deg C
* offset 4614
*/
uint8_t alignmentFill_at_4614[2];
int8_t wwCltBins[WWAE_TABLE_SIZE];
/**
* offset 4622
*/
scaled_channel<uint8_t, 100, 1> wwTauCltValues[WWAE_TABLE_SIZE];
/**
* offset 4630
*/
scaled_channel<uint8_t, 100, 1> wwBetaCltValues[WWAE_TABLE_SIZE];
/**
kPa
* offset 4638
*/
int8_t wwMapBins[WWAE_TABLE_SIZE];
/**
* offset 4646
*/
scaled_channel<uint8_t, 100, 1> wwTauMapValues[WWAE_TABLE_SIZE];
/**
* offset 4654
*/
scaled_channel<uint8_t, 100, 1> wwBetaMapValues[WWAE_TABLE_SIZE];
/**
units
* offset 4616
* offset 4662
*/
int mainUnusedEnd[94];
uint8_t mainUnusedEnd[330];
/** total size 4992*/
};
@ -4484,4 +4505,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Thu Jan 27 19:25:50 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:58 UTC 2022

16
firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
View File

@ -78,7 +78,6 @@
#define alignEngineSnifferAtTDC_offset 748
#define alignmentFill_at_1867_offset 1867
#define alignmentFill_at_3979_offset 3979
#define alignmentFill_at_4614_offset 4614
#define alignmentFill_at_62_offset 62
#define alternatorControl_dFactor_offset 1492
#define alternatorControl_iFactor_offset 1488
@ -570,6 +569,7 @@
#define coastingFuelCutVssHigh_offset 1690
#define coastingFuelCutVssLow_offset 1689
#define communicationLedPin_offset 1572
#define complexWallModel_offset 1272
#define COMPOSITE_DATA_LENGTH 2500
#define COMPOSITE_DATA_LENGTH_HALF 1250
#define COMPOSITE_PACKET_COUNT 500
@ -1597,7 +1597,7 @@
#define MAIN_HELP_URL "http://www.rusefi.com/"
#define mainRelayPin_offset 714
#define mainRelayPinMode_offset 756
#define mainUnusedEnd_offset 4616
#define mainUnusedEnd_offset 4662
#define malfunctionIndicatorPin_offset 668
#define malfunctionIndicatorPinMode_offset 669
#define manIdlePosition_offset 616
@ -1879,7 +1879,7 @@
#define show_test_presets true
#define showHumanReadableWarning_offset 896
#define showSdCardWarning_offset 164
#define SIGNATURE_HASH 2454969911
#define SIGNATURE_HASH 4257751893
#define silentTriggerError_offset 1260
#define slowAdcAlpha_offset 1712
#define sparkDwellRpmBins_offset 54
@ -2404,7 +2404,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator true
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2022.01.28.kin.2454969911"
#define TS_SIGNATURE "rusEFI 2022.01.28.kin.4257751893"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'
@ -2443,7 +2443,6 @@
#define unused1130_offset 1740
#define unused1476b19_offset 1272
#define unused1476b20_offset 1272
#define unused1476b3_offset 1272
#define unused1476b8_offset 1272
#define unused1689_offset 1691
#define unused1740b0_offset 1740
@ -2603,5 +2602,12 @@
#define wastegatePositionSensor_offset 1751
#define wboHeaterPin_offset 681
#define wheelDiameter_offset 722
#define WWAE_TABLE_SIZE 8
#define wwaeBeta_offset 1568
#define wwaeTau_offset 1480
#define wwBetaCltValues_offset 4630
#define wwBetaMapValues_offset 4654
#define wwCltBins_offset 4614
#define wwMapBins_offset 4638
#define wwTauCltValues_offset 4622
#define wwTauMapValues_offset 4646

37
firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Thu Jan 27 19:25:53 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:03:01 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2448,8 +2448,9 @@ struct engine_configuration_s {
offset 1272 bit 2 */
bool isCylinderCleanupEnabled : 1 {};
/**
* Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?
offset 1272 bit 3 */
bool unused1476b3 : 1 {};
bool complexWallModel : 1 {};
/**
offset 1272 bit 4 */
bool alwaysInstantRpm : 1 {};
@ -4062,16 +4063,36 @@ struct engine_configuration_s {
*/
uint16_t unusedShort;
/**
* need 4 byte alignment
units
deg C
* offset 4642
*/
uint8_t alignmentFill_at_4642[2];
int8_t wwCltBins[WWAE_TABLE_SIZE];
/**
* offset 4650
*/
scaled_channel<uint8_t, 100, 1> wwTauCltValues[WWAE_TABLE_SIZE];
/**
* offset 4658
*/
scaled_channel<uint8_t, 100, 1> wwBetaCltValues[WWAE_TABLE_SIZE];
/**
kPa
* offset 4666
*/
int8_t wwMapBins[WWAE_TABLE_SIZE];
/**
* offset 4674
*/
scaled_channel<uint8_t, 100, 1> wwTauMapValues[WWAE_TABLE_SIZE];
/**
* offset 4682
*/
scaled_channel<uint8_t, 100, 1> wwBetaMapValues[WWAE_TABLE_SIZE];
/**
units
* offset 4644
* offset 4690
*/
int mainUnusedEnd[94];
uint8_t mainUnusedEnd[330];
/** total size 5020*/
};
@ -4490,4 +4511,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Thu Jan 27 19:25:53 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:03:01 UTC 2022

16
firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
View File

@ -87,7 +87,6 @@
#define alignmentFill_at_1847_offset 1847
#define alignmentFill_at_1873_offset 1873
#define alignmentFill_at_4007_offset 4007
#define alignmentFill_at_4642_offset 4642
#define alignmentFill_at_62_offset 62
#define alternatorControl_dFactor_offset 1492
#define alternatorControl_iFactor_offset 1488
@ -597,6 +596,7 @@
#define coastingFuelCutVssHigh_offset 1690
#define coastingFuelCutVssLow_offset 1689
#define communicationLedPin_offset 1572
#define complexWallModel_offset 1272
#define COMPOSITE_DATA_LENGTH 2500
#define COMPOSITE_DATA_LENGTH_HALF 1250
#define COMPOSITE_PACKET_COUNT 500
@ -1624,7 +1624,7 @@
#define MAIN_HELP_URL "http://www.rusefi.com/"
#define mainRelayPin_offset 714
#define mainRelayPinMode_offset 756
#define mainUnusedEnd_offset 4644
#define mainUnusedEnd_offset 4690
#define malfunctionIndicatorPin_offset 668
#define malfunctionIndicatorPinMode_offset 669
#define manIdlePosition_offset 616
@ -1907,7 +1907,7 @@
#define show_test_presets false
#define showHumanReadableWarning_offset 896
#define showSdCardWarning_offset 164
#define SIGNATURE_HASH 2495210279
#define SIGNATURE_HASH 4213317189
#define silentTriggerError_offset 1260
#define slowAdcAlpha_offset 1712
#define sparkDwellRpmBins_offset 54
@ -2432,7 +2432,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port false
#define TS_SIGNATURE "rusEFI 2022.01.28.subaru_eg33_f7.2495210279"
#define TS_SIGNATURE "rusEFI 2022.01.28.subaru_eg33_f7.4213317189"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'
@ -2471,7 +2471,6 @@
#define unused1130_offset 1740
#define unused1476b19_offset 1272
#define unused1476b20_offset 1272
#define unused1476b3_offset 1272
#define unused1476b8_offset 1272
#define unused1689_offset 1691
#define unused1740b0_offset 1740
@ -2639,5 +2638,12 @@
#define wastegatePositionSensor_offset 1751
#define wboHeaterPin_offset 681
#define wheelDiameter_offset 722
#define WWAE_TABLE_SIZE 8
#define wwaeBeta_offset 1568
#define wwaeTau_offset 1480
#define wwBetaCltValues_offset 4658
#define wwBetaMapValues_offset 4682
#define wwCltBins_offset 4642
#define wwMapBins_offset 4666
#define wwTauCltValues_offset 4650
#define wwTauMapValues_offset 4674

37
firmware/controllers/generated/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Thu Jan 27 19:25:56 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:03:04 UTC 2022
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -2448,8 +2448,9 @@ struct engine_configuration_s {
offset 1272 bit 2 */
bool isCylinderCleanupEnabled : 1 {};
/**
* Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?
offset 1272 bit 3 */
bool unused1476b3 : 1 {};
bool complexWallModel : 1 {};
/**
offset 1272 bit 4 */
bool alwaysInstantRpm : 1 {};
@ -4062,16 +4063,36 @@ struct engine_configuration_s {
*/
uint16_t unusedShort;
/**
* need 4 byte alignment
units
deg C
* offset 4642
*/
uint8_t alignmentFill_at_4642[2];
int8_t wwCltBins[WWAE_TABLE_SIZE];
/**
* offset 4650
*/
scaled_channel<uint8_t, 100, 1> wwTauCltValues[WWAE_TABLE_SIZE];
/**
* offset 4658
*/
scaled_channel<uint8_t, 100, 1> wwBetaCltValues[WWAE_TABLE_SIZE];
/**
kPa
* offset 4666
*/
int8_t wwMapBins[WWAE_TABLE_SIZE];
/**
* offset 4674
*/
scaled_channel<uint8_t, 100, 1> wwTauMapValues[WWAE_TABLE_SIZE];
/**
* offset 4682
*/
scaled_channel<uint8_t, 100, 1> wwBetaMapValues[WWAE_TABLE_SIZE];
/**
units
* offset 4644
* offset 4690
*/
int mainUnusedEnd[94];
uint8_t mainUnusedEnd[330];
/** total size 5020*/
};
@ -4490,4 +4511,4 @@ struct persistent_config_s {
};
// end
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Thu Jan 27 19:25:56 UTC 2022
// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:03:04 UTC 2022

16
firmware/controllers/generated/rusefi_generated.h
View File

@ -79,7 +79,6 @@
#define alignmentFill_at_1847_offset 1847
#define alignmentFill_at_1873_offset 1873
#define alignmentFill_at_4007_offset 4007
#define alignmentFill_at_4642_offset 4642
#define alignmentFill_at_62_offset 62
#define alternatorControl_dFactor_offset 1492
#define alternatorControl_iFactor_offset 1488
@ -585,6 +584,7 @@
#define coastingFuelCutVssHigh_offset 1690
#define coastingFuelCutVssLow_offset 1689
#define communicationLedPin_offset 1572
#define complexWallModel_offset 1272
#define COMPOSITE_DATA_LENGTH 2500
#define COMPOSITE_DATA_LENGTH_HALF 1250
#define COMPOSITE_PACKET_COUNT 500
@ -1612,7 +1612,7 @@
#define MAIN_HELP_URL "http://www.rusefi.com/"
#define mainRelayPin_offset 714
#define mainRelayPinMode_offset 756
#define mainUnusedEnd_offset 4644
#define mainUnusedEnd_offset 4690
#define malfunctionIndicatorPin_offset 668
#define malfunctionIndicatorPinMode_offset 669
#define manIdlePosition_offset 616
@ -1894,7 +1894,7 @@
#define show_test_presets true
#define showHumanReadableWarning_offset 896
#define showSdCardWarning_offset 164
#define SIGNATURE_HASH 1459877239
#define SIGNATURE_HASH 949487637
#define silentTriggerError_offset 1260
#define slowAdcAlpha_offset 1712
#define sparkDwellRpmBins_offset 54
@ -2419,7 +2419,7 @@
#define ts_show_spi true
#define ts_show_trigger_comparator false
#define ts_show_tunerstudio_port true
#define TS_SIGNATURE "rusEFI 2022.01.28.all.1459877239"
#define TS_SIGNATURE "rusEFI 2022.01.28.all.949487637"
#define TS_SINGLE_WRITE_COMMAND 'W'
#define TS_SINGLE_WRITE_COMMAND_char W
#define TS_TEST_COMMAND 't'
@ -2458,7 +2458,6 @@
#define unused1130_offset 1740
#define unused1476b19_offset 1272
#define unused1476b20_offset 1272
#define unused1476b3_offset 1272
#define unused1476b8_offset 1272
#define unused1689_offset 1691
#define unused1740b0_offset 1740
@ -2626,5 +2625,12 @@
#define wastegatePositionSensor_offset 1751
#define wboHeaterPin_offset 681
#define wheelDiameter_offset 722
#define WWAE_TABLE_SIZE 8
#define wwaeBeta_offset 1568
#define wwaeTau_offset 1480
#define wwBetaCltValues_offset 4658
#define wwBetaMapValues_offset 4682
#define wwCltBins_offset 4642
#define wwMapBins_offset 4666
#define wwTauCltValues_offset 4650
#define wwTauMapValues_offset 4674

4
firmware/controllers/generated/signature_all.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1459877239
#define TS_SIGNATURE "rusEFI 2022.01.28.all.1459877239"
#define SIGNATURE_HASH 949487637
#define TS_SIGNATURE "rusEFI 2022.01.28.all.949487637"

4
firmware/controllers/generated/signature_alphax-2chan.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1449434808
#define TS_SIGNATURE "rusEFI 2022.01.28.alphax-2chan.1449434808"
#define SIGNATURE_HASH 973038554
#define TS_SIGNATURE "rusEFI 2022.01.28.alphax-2chan.973038554"

4
firmware/controllers/generated/signature_alphax-4chan.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 4191780204
#define TS_SIGNATURE "rusEFI 2022.01.28.alphax-4chan.4191780204"
#define SIGNATURE_HASH 2520940558
#define TS_SIGNATURE "rusEFI 2022.01.28.alphax-4chan.2520940558"

4
firmware/controllers/generated/signature_atlas.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1271464016
#define TS_SIGNATURE "rusEFI 2022.01.28.atlas.1271464016"
#define SIGNATURE_HASH 609418546
#define TS_SIGNATURE "rusEFI 2022.01.28.atlas.609418546"

4
firmware/controllers/generated/signature_f429-discovery.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 1459877239
#define TS_SIGNATURE "rusEFI 2022.01.28.f429-discovery.1459877239"
#define SIGNATURE_HASH 949487637
#define TS_SIGNATURE "rusEFI 2022.01.28.f429-discovery.949487637"

4
firmware/controllers/generated/signature_frankenso_na6.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 758227102
#define TS_SIGNATURE "rusEFI 2022.01.28.frankenso_na6.758227102"
#define SIGNATURE_HASH 1118461436
#define TS_SIGNATURE "rusEFI 2022.01.28.frankenso_na6.1118461436"

4
firmware/controllers/generated/signature_hellen-nb1.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2882145198
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen-nb1.2882145198"
#define SIGNATURE_HASH 3293705932
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen-nb1.3293705932"

4
firmware/controllers/generated/signature_hellen121nissan.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 4088571396
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen121nissan.4088571396"
#define SIGNATURE_HASH 2619956070
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen121nissan.2619956070"

4
firmware/controllers/generated/signature_hellen121vag.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 144757117
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen121vag.144757117"
#define SIGNATURE_HASH 1731931167
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen121vag.1731931167"

4
firmware/controllers/generated/signature_hellen128.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 321706322
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen128.321706322"
#define SIGNATURE_HASH 2092377136
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen128.2092377136"

4
firmware/controllers/generated/signature_hellen154hyundai.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2602559963
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen154hyundai.2602559963"
#define SIGNATURE_HASH 4102296761
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen154hyundai.4102296761"

4
firmware/controllers/generated/signature_hellen72.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2747167431
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen72.2747167431"
#define SIGNATURE_HASH 3425013669
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen72.3425013669"

4
firmware/controllers/generated/signature_hellen81.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 397668148
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen81.397668148"
#define SIGNATURE_HASH 2015892054
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen81.2015892054"

4
firmware/controllers/generated/signature_hellen88bmw.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 4140000296
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen88bmw.4140000296"
#define SIGNATURE_HASH 2572720458
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen88bmw.2572720458"

4
firmware/controllers/generated/signature_hellenNA6.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 557757407
#define TS_SIGNATURE "rusEFI 2022.01.28.hellenNA6.557757407"
#define SIGNATURE_HASH 1319456445
#define TS_SIGNATURE "rusEFI 2022.01.28.hellenNA6.1319456445"

4
firmware/controllers/generated/signature_hellenNA8_96.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2093974700
#define TS_SIGNATURE "rusEFI 2022.01.28.hellenNA8_96.2093974700"
#define SIGNATURE_HASH 324303310
#define TS_SIGNATURE "rusEFI 2022.01.28.hellenNA8_96.324303310"

4
firmware/controllers/generated/signature_hellen_cypress.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat null
//
#define SIGNATURE_HASH 1844843211
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen_cypress.1844843211"
#define SIGNATURE_HASH 40759209
#define TS_SIGNATURE "rusEFI 2022.01.28.hellen_cypress.40759209"

4
firmware/controllers/generated/signature_kin.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat null
//
#define SIGNATURE_HASH 2454969911
#define TS_SIGNATURE "rusEFI 2022.01.28.kin.2454969911"
#define SIGNATURE_HASH 4257751893
#define TS_SIGNATURE "rusEFI 2022.01.28.kin.4257751893"

4
firmware/controllers/generated/signature_mre_f4.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 983823538
#define TS_SIGNATURE "rusEFI 2022.01.28.mre_f4.983823538"
#define SIGNATURE_HASH 1429735888
#define TS_SIGNATURE "rusEFI 2022.01.28.mre_f4.1429735888"

4
firmware/controllers/generated/signature_mre_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 983823538
#define TS_SIGNATURE "rusEFI 2022.01.28.mre_f7.983823538"
#define SIGNATURE_HASH 1429735888
#define TS_SIGNATURE "rusEFI 2022.01.28.mre_f7.1429735888"

4
firmware/controllers/generated/signature_prometheus_405.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 132721809
#define TS_SIGNATURE "rusEFI 2022.01.28.prometheus_405.132721809"
#define SIGNATURE_HASH 1752355315
#define TS_SIGNATURE "rusEFI 2022.01.28.prometheus_405.1752355315"

4
firmware/controllers/generated/signature_prometheus_469.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 132721809
#define TS_SIGNATURE "rusEFI 2022.01.28.prometheus_469.132721809"
#define SIGNATURE_HASH 1752355315
#define TS_SIGNATURE "rusEFI 2022.01.28.prometheus_469.1752355315"

4
firmware/controllers/generated/signature_proteus_f4.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2202089604
#define TS_SIGNATURE "rusEFI 2022.01.28.proteus_f4.2202089604"
#define SIGNATURE_HASH 3973760486
#define TS_SIGNATURE "rusEFI 2022.01.28.proteus_f4.3973760486"

4
firmware/controllers/generated/signature_proteus_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2202089604
#define TS_SIGNATURE "rusEFI 2022.01.28.proteus_f7.2202089604"
#define SIGNATURE_HASH 3973760486
#define TS_SIGNATURE "rusEFI 2022.01.28.proteus_f7.3973760486"

4
firmware/controllers/generated/signature_proteus_h7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null
//
#define SIGNATURE_HASH 2202089604
#define TS_SIGNATURE "rusEFI 2022.01.28.proteus_h7.2202089604"
#define SIGNATURE_HASH 3973760486
#define TS_SIGNATURE "rusEFI 2022.01.28.proteus_h7.3973760486"

4
firmware/controllers/generated/signature_subaru_eg33_f7.h
View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_config.sh null
//
#define SIGNATURE_HASH 2495210279
#define TS_SIGNATURE "rusEFI 2022.01.28.subaru_eg33_f7.2495210279"
#define SIGNATURE_HASH 4213317189
#define TS_SIGNATURE "rusEFI 2022.01.28.subaru_eg33_f7.4213317189"

7
firmware/controllers/lua/generated/value_lookup_generated.cpp
View File

@ -514,6 +514,8 @@ float getConfigValueByName(const char *name) {
return engineConfiguration->isIgnitionEnabled;
if (strEqualCaseInsensitive(name, "isCylinderCleanupEnabled"))
return engineConfiguration->isCylinderCleanupEnabled;
if (strEqualCaseInsensitive(name, "complexWallModel"))
return engineConfiguration->complexWallModel;
if (strEqualCaseInsensitive(name, "alwaysInstantRpm"))
return engineConfiguration->alwaysInstantRpm;
if (strEqualCaseInsensitive(name, "isMapAveragingEnabled"))
@ -2204,6 +2206,11 @@ void setConfigValueByName(const char *name, float value) {
engineConfiguration->isCylinderCleanupEnabled = (int)value;
return;
}
if (strEqualCaseInsensitive(name, "complexWallModel"))
{
engineConfiguration->complexWallModel = (int)value;
return;
}
if (strEqualCaseInsensitive(name, "alwaysInstantRpm"))
{
engineConfiguration->alwaysInstantRpm = (int)value;

69
firmware/tunerstudio/generated/rusefi.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.all.1459877239"
signature = "rusEFI 2022.01.28.all.949487637"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.all.1459877239" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.all.949487637" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:59 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:56 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5667,8 +5707,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5678,6 +5719,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_alphax-2chan.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.alphax-2chan.1449434808"
signature = "rusEFI 2022.01.28.alphax-2chan.973038554"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.alphax-2chan.1449434808" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.alphax-2chan.973038554" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:19 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:19 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5644,8 +5684,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5655,6 +5696,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_alphax-4chan.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.alphax-4chan.4191780204"
signature = "rusEFI 2022.01.28.alphax-4chan.2520940558"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.alphax-4chan.4191780204" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.alphax-4chan.2520940558" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:20 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:21 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5644,8 +5684,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5655,6 +5696,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_atlas.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.atlas.1271464016"
signature = "rusEFI 2022.01.28.atlas.609418546"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.atlas.1271464016" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.atlas.609418546" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:57 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:55 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5659,8 +5699,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5670,6 +5711,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_f429-discovery.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.f429-discovery.1459877239"
signature = "rusEFI 2022.01.28.f429-discovery.949487637"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.f429-discovery.1459877239" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.f429-discovery.949487637" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:17 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:17 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5667,8 +5707,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5678,6 +5719,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.frankenso_na6.758227102"
signature = "rusEFI 2022.01.28.frankenso_na6.1118461436"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.frankenso_na6.758227102" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.frankenso_na6.1118461436" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:46 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:44 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5667,8 +5707,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5678,6 +5719,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen-nb1.2882145198"
signature = "rusEFI 2022.01.28.hellen-nb1.3293705932"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen-nb1.2882145198" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen-nb1.3293705932" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:36 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:35 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5644,8 +5684,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5655,6 +5696,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen121nissan.4088571396"
signature = "rusEFI 2022.01.28.hellen121nissan.2619956070"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen121nissan.4088571396" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen121nissan.2619956070" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:26 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:26 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5643,8 +5683,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5654,6 +5695,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen121vag.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen121vag.144757117"
signature = "rusEFI 2022.01.28.hellen121vag.1731931167"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen121vag.144757117" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen121vag.1731931167" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:24 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:24 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5643,8 +5683,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5654,6 +5695,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen128.321706322"
signature = "rusEFI 2022.01.28.hellen128.2092377136"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen128.321706322" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen128.2092377136" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:22 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:22 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5643,8 +5683,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5654,6 +5695,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen154hyundai.2602559963"
signature = "rusEFI 2022.01.28.hellen154hyundai.4102296761"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen154hyundai.2602559963" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen154hyundai.4102296761" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:28 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:27 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5643,8 +5683,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5654,6 +5695,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen72.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen72.2747167431"
signature = "rusEFI 2022.01.28.hellen72.3425013669"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen72.2747167431" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen72.3425013669" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:32 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:31 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5644,8 +5684,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5655,6 +5696,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen81.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen81.397668148"
signature = "rusEFI 2022.01.28.hellen81.2015892054"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen81.397668148" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen81.2015892054" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:34 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:33 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5642,8 +5682,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5653,6 +5694,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen88bmw.4140000296"
signature = "rusEFI 2022.01.28.hellen88bmw.2572720458"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen88bmw.4140000296" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen88bmw.2572720458" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:30 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:29 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5643,8 +5683,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5654,6 +5695,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellenNA6.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellenNA6.557757407"
signature = "rusEFI 2022.01.28.hellenNA6.1319456445"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellenNA6.557757407" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellenNA6.1319456445" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:38 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:37 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5644,8 +5684,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5655,6 +5696,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellenNA8_96.2093974700"
signature = "rusEFI 2022.01.28.hellenNA8_96.324303310"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellenNA8_96.2093974700" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellenNA8_96.324303310" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:40 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:38 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5644,8 +5684,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5655,6 +5696,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_hellen_cypress.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.hellen_cypress.1844843211"
signature = "rusEFI 2022.01.28.hellen_cypress.40759209"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.hellen_cypress.1844843211" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.hellen_cypress.40759209" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:15:02 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:59 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5667,8 +5707,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5678,6 +5719,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_kinetis.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.kin.2454969911"
signature = "rusEFI 2022.01.28.kin.4257751893"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.kin.2454969911" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.kin.4257751893" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:15:01 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:58 UTC 2022
pageSize = 20968
page = 1
@ -665,7 +665,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1244,8 +1244,13 @@ gearRatio7 = scalar, U16, 4606, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4608, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4610, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4612, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4614 = array, U08, 4614, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4616, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4614, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4622, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4630, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4638, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4646, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4654, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4662, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 4992, 120
afterstartCoolantBins = array, F32, 5112, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5144, [8], "Seconds", 1, 0, 0, 100, 1
@ -1570,6 +1575,7 @@ fuelTrims12_table = array, S08, 20952, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1788,7 +1794,6 @@ fuelTrims12_table = array, S08, 20952, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4614 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2726,6 +2731,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3740,6 +3777,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5634,8 +5674,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5645,6 +5686,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_mre_f4.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.mre_f4.983823538"
signature = "rusEFI 2022.01.28.mre_f4.1429735888"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.mre_f4.983823538" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.mre_f4.1429735888" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:44 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:42 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5643,8 +5683,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5654,6 +5695,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_mre_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.mre_f7.983823538"
signature = "rusEFI 2022.01.28.mre_f7.1429735888"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.mre_f7.983823538" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.mre_f7.1429735888" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:42 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:41 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5643,8 +5683,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5654,6 +5695,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_prometheus_405.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.prometheus_405.132721809"
signature = "rusEFI 2022.01.28.prometheus_405.1752355315"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.prometheus_405.132721809" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.prometheus_405.1752355315" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:49 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:47 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5662,8 +5702,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5673,6 +5714,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_prometheus_469.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.prometheus_469.132721809"
signature = "rusEFI 2022.01.28.prometheus_469.1752355315"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.prometheus_469.132721809" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.prometheus_469.1752355315" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:48 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:46 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5662,8 +5702,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5673,6 +5714,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_proteus_f4.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.proteus_f4.2202089604"
signature = "rusEFI 2022.01.28.proteus_f4.3973760486"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.proteus_f4.2202089604" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.proteus_f4.3973760486" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:53 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:51 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5635,8 +5675,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5646,6 +5687,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_proteus_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.proteus_f7.2202089604"
signature = "rusEFI 2022.01.28.proteus_f7.3973760486"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.proteus_f7.2202089604" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.proteus_f7.3973760486" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:51 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:49 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5635,8 +5675,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5646,6 +5687,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_proteus_h7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.proteus_h7.2202089604"
signature = "rusEFI 2022.01.28.proteus_h7.3973760486"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.proteus_h7.2202089604" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.proteus_h7.3973760486" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:14:55 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:02:53 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5635,8 +5675,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5646,6 +5687,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

69
firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
View File

@ -32,12 +32,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI 2022.01.28.subaru_eg33_f7.2495210279"
signature = "rusEFI 2022.01.28.subaru_eg33_f7.4213317189"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmwave version for title bar.
signature = "rusEFI 2022.01.28.subaru_eg33_f7.2495210279" ; signature is expected to be 7 or more characters.
signature = "rusEFI 2022.01.28.subaru_eg33_f7.4213317189" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -84,7 +84,7 @@ enable2ndByteCanID = false
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:15:04 UTC 2022
; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:03:01 UTC 2022
pageSize = 20996
page = 1
@ -671,7 +671,7 @@ idleMode = bits, U32, 1268, [0:0], "Open Loop + Closed Loop", "Open Loop"
isInjectionEnabled = bits, U32, 1272, [0:0], "false", "true"
isIgnitionEnabled = bits, U32, 1272, [1:1], "false", "true"
isCylinderCleanupEnabled = bits, U32, 1272, [2:2], "false", "true"
unused1476b3 = bits, U32, 1272, [3:3], "false", "true"
complexWallModel = bits, U32, 1272, [3:3], "Basic (constants)", "Advanced (tables)"
alwaysInstantRpm = bits, U32, 1272, [4:4], "false", "true"
isMapAveragingEnabled = bits, U32, 1272, [5:5], "false", "true"
overrideCrankingIacSetting = bits, U32, 1272, [6:6], "false", "true"
@ -1266,8 +1266,13 @@ gearRatio7 = scalar, U16, 4634, "ratio", 0.01, 0, 0, 650, 0
gearRatio8 = scalar, U16, 4636, "ratio", 0.01, 0, 0, 650, 0
vvtActivationDelayMs = scalar, U16, 4638, "ms", 1, 0, 0, 65000, 0
unusedShort = scalar, U16, 4640, "RPM", 1, 0, 0, 65000, 0
alignmentFill_at_4642 = array, U08, 4642, [2], "units", 1, 0, -20, 100, 0
mainUnusedEnd = array, S32, 4644, [94], "units", 1, 0, 0, 1, 0
wwCltBins = array, S08, 4642, [8], "deg C", 1, 0, -40, 120, 0
wwTauCltValues = array, U08, 4650, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaCltValues = array, U08, 4658, [8], "", 0.01, 0, 0, 1, 2
wwMapBins = array, S08, 4666, [8], "kPa", 1, 0, 0, 250, 0
wwTauMapValues = array, U08, 4674, [8], "", 0.01, 0, 0, 2.5, 2
wwBetaMapValues = array, U08, 4682, [8], "", 0.01, 0, 0, 2.5, 2
mainUnusedEnd = array, U08, 4690, [330], "units", 1, 0, 0, 1, 0
warning_message = string, ASCII, 5020, 120
afterstartCoolantBins = array, F32, 5140, [8], "C", 1, 0, -100, 250, 0
afterstartHoldTime = array, F32, 5172, [8], "Seconds", 1, 0, 0, 100, 1
@ -1598,6 +1603,7 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
isInjectionEnabled = "Enable fuel injection - This is default off for new projects as a safety feature, set to "true" to enable fuel injection and further injector settings."
isIgnitionEnabled = "Enable ignition - This is default off for new projects as a safety feature, set to "true" to enable ignition and further ignition settings."
isCylinderCleanupEnabled = "When enabled if TPS is held above 95% no fuel is injected while cranking to clear excess fuel from the cylinders."
complexWallModel = "Should we use tables to vary tau/beta based on CLT/MAP, or just with fixed values?"
overrideCrankingIacSetting = "If enabled, use separate temperature multiplier table for cranking idle position.\nIf disabled, use normal running multiplier table applied to the cranking base position."
useSeparateAdvanceForIdle = "This activates a separate ignition timing table for idle conditions, this can help idle stability by using ignition retard and advance either side of the desired idle speed. Extra retard at low idle speeds will prevent stalling and extra advance at high idle speeds can help reduce engine power and slow the idle speed."
useSeparateVeForIdle = "This activates a separate fuel table for Idle, this allows fine tuning of the idle fuelling."
@ -1822,7 +1828,6 @@ fuelTrims12_table = array, S08, 20980, [4x4], "", 0.2, 0, -25, 25, 1
hpfpActivationAngle = "How long to keep the valve activated (in order to allow the pump to build pressure and keep the valve open on its own)"
hpfpTargetDecay = "The fastest rate the target pressure can be reduced by. This is because HPFP have no way to bleed off pressure other than injecting fuel."
vvtActivationDelayMs = "We need to give engine time to build oil pressure without diverting it to VVT"
alignmentFill_at_4642 = "need 4 byte alignment"
cltCrankingCorrBins = "CLT-based cranking position multiplier for simple manual idle controller"
cltCrankingCorr = "CLT-based cranking position multiplier for simple manual idle controller"
idleAdvanceBins = "Optional timing advance table for Idle (see useSeparateAdvanceForIdle)"
@ -2760,6 +2765,38 @@ etbStatus_resetCounter = scalar, S32, 636, "", 1, 0
xBins = hpfpDeadtimeVoltsBins
yBins = hpfpDeadtimeMS
curve = wwTauCltCurve, "Evap time vs. CLT"
columnLabel = "coolant", "seconds"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwTauCltValues
gauge = CLTGauge
curve = wwTauMapCurve, "Evap time vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwTauMapValues
gauge = MAPGauge
curve = wwBetaCltCurve, "Impact fraction vs. CLT"
columnLabel = "coolant", "fraction"
xAxis = -40, 120, 9
yAxis = 0, 2, 9
xBins = wwCltBins, coolant
yBins = wwBetaCltValues
gauge = CLTGauge
curve = wwBetaMapCurve, "Impact fraction vs. MAP"
columnLabel = "MAP", "mult"
xAxis = 0, 100, 5
yAxis = 0, 2, 9
xBins = wwMapBins, MAPValue
yBins = wwBetaMapValues
gauge = MAPGauge
[TableEditor]
; table_id, map3d_id, "title", page
@ -3774,6 +3811,9 @@ menuDialog = main
subMenu = tpsTpsAccelTbl, "TPS/TPS acceleration extra fuel", 0, {isInjectionEnabled == 1}
subMenu = mapAccelTaper, "Engine load AE taper", 0, {isInjectionEnabled == 1}
groupMenu = "Wall wetting AE"
groupChildMenu = wwTauCurves, "Evap time", 0, { complexWallModel != 0 }
groupChildMenu = wwBetaCurves, "Impact fraction", 0, { complexWallModel != 0 }
menu = "Ignition"
subMenu = ignitionSettings, "Ignition settings"
@ -5658,8 +5698,9 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "Fraction Divisor", tpsAccelFractionDivisor
dialog = WallWettingAccelPanel, "Wall Wetting (alpha version)"
field = "evaporation time constant / tau", wwaeTau
field = "added to wall coef / beta", wwaeBeta
field = "Wall fueling model type", complexWallModel
field = "evaporation time constant / tau", wwaeTau, { complexWallModel == 0 }
field = "added to wall coef / beta", wwaeBeta, { complexWallModel == 0 }
; Tuning->AccelEnrichment
@ -5669,6 +5710,16 @@ cmd_set_engine_type_default = "Z\x00\x31\x00\x00"
field = "No accel after RPM hard limit", noAccelAfterHardLimitPeriodSecs
dialog = wwTauCurves, "Wall wetting AE evaporation time"
field = "#Set a base evaporation time based on coolant temperature, and a multiplier based on MAP."
panel = wwTauCltCurve
panel = wwTauMapCurve
dialog = wwBetaCurves, "Wall wetting AE impact fraction"
field = "#Set a base impact fraction based on coolant temperature, and a multiplier based on MAP."
panel = wwBetaCltCurve
panel = wwBetaMapCurve
dialog = auxValvesIO, "Outputs"
field = "aux valve #1", auxValves1
field = "aux valve #2", auxValves2

38
java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
View File

@ -1,6 +1,6 @@
package com.rusefi.config.generated;
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 01:15:07 UTC 2022
// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) integration/rusefi_config.txt Fri Jan 28 06:03:04 UTC 2022
// by class com.rusefi.output.FileJavaFieldsConsumer
import com.rusefi.config.*;
@ -77,7 +77,6 @@ public class Fields {
public static final int alignmentFill_at_1847_offset = 1847;
public static final int alignmentFill_at_1873_offset = 1873;
public static final int alignmentFill_at_4007_offset = 4007;
public static final int alignmentFill_at_4642_offset = 4642;
public static final int alignmentFill_at_62_offset = 62;
public static final int alternatorControl_dFactor_offset = 1492;
public static final int alternatorControl_iFactor_offset = 1488;
@ -568,6 +567,7 @@ public class Fields {
public static final int coastingFuelCutVssHigh_offset = 1690;
public static final int coastingFuelCutVssLow_offset = 1689;
public static final int communicationLedPin_offset = 1572;
public static final int complexWallModel_offset = 1272;
public static final int COMPOSITE_DATA_LENGTH = 2500;
public static final int COMPOSITE_DATA_LENGTH_HALF = 1250;
public static final int COMPOSITE_PACKET_COUNT = 500;
@ -1556,7 +1556,7 @@ public class Fields {
public static final String MAIN_HELP_URL = "http://www.rusefi.com/";
public static final int mainRelayPin_offset = 714;
public static final int mainRelayPinMode_offset = 756;
public static final int mainUnusedEnd_offset = 4644;
public static final int mainUnusedEnd_offset = 4690;
public static final int malfunctionIndicatorPin_offset = 668;
public static final int malfunctionIndicatorPinMode_offset = 669;
public static final int manIdlePosition_offset = 616;
@ -1822,7 +1822,7 @@ public class Fields {
public static final int servoOutputPins8_offset = 2739;
public static final int showHumanReadableWarning_offset = 896;
public static final int showSdCardWarning_offset = 164;
public static final int SIGNATURE_HASH = 1459877239;
public static final int SIGNATURE_HASH = 949487637;
public static final int silentTriggerError_offset = 1260;
public static final int slowAdcAlpha_offset = 1712;
public static final int sparkDwellRpmBins_offset = 54;
@ -2292,7 +2292,7 @@ public class Fields {
public static final int TS_RESPONSE_UNDERRUN = 0x80;
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
public static final char TS_SET_LOGGER_SWITCH = 'l';
public static final String TS_SIGNATURE = "rusEFI 2022.01.28.all.1459877239";
public static final String TS_SIGNATURE = "rusEFI 2022.01.28.all.949487637";
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
public static final char TS_TEST_COMMAND = 't';
public static final int TsCalMode_EtbKd = 5;
@ -2328,7 +2328,6 @@ public class Fields {
public static final int unused1130_offset = 1740;
public static final int unused1476b19_offset = 1272;
public static final int unused1476b20_offset = 1272;
public static final int unused1476b3_offset = 1272;
public static final int unused1476b8_offset = 1272;
public static final int unused1689_offset = 1691;
public static final int unused1740b0_offset = 1740;
@ -2491,8 +2490,15 @@ public class Fields {
public static final int wastegatePositionSensor_offset = 1751;
public static final int wboHeaterPin_offset = 681;
public static final int wheelDiameter_offset = 722;
public static final int WWAE_TABLE_SIZE = 8;
public static final int wwaeBeta_offset = 1568;
public static final int wwaeTau_offset = 1480;
public static final int wwBetaCltValues_offset = 4658;
public static final int wwBetaMapValues_offset = 4682;
public static final int wwCltBins_offset = 4642;
public static final int wwMapBins_offset = 4666;
public static final int wwTauCltValues_offset = 4650;
public static final int wwTauMapValues_offset = 4674;
public static final Field ENGINETYPE = Field.create("ENGINETYPE", 0, FieldType.INT);
public static final Field SENSORSNIFFERRPMTHRESHOLD = Field.create("SENSORSNIFFERRPMTHRESHOLD", 4, FieldType.INT8);
public static final Field RPMHARDLIMIT = Field.create("RPMHARDLIMIT", 5, FieldType.INT8);
@ -3090,7 +3096,7 @@ public class Fields {
public static final Field ISINJECTIONENABLED = Field.create("ISINJECTIONENABLED", 1272, FieldType.BIT, 0);
public static final Field ISIGNITIONENABLED = Field.create("ISIGNITIONENABLED", 1272, FieldType.BIT, 1);
public static final Field ISCYLINDERCLEANUPENABLED = Field.create("ISCYLINDERCLEANUPENABLED", 1272, FieldType.BIT, 2);
public static final Field UNUSED1476B3 = Field.create("UNUSED1476B3", 1272, FieldType.BIT, 3);
public static final Field COMPLEXWALLMODEL = Field.create("COMPLEXWALLMODEL", 1272, FieldType.BIT, 3);
public static final Field ALWAYSINSTANTRPM = Field.create("ALWAYSINSTANTRPM", 1272, FieldType.BIT, 4);
public static final Field ISMAPAVERAGINGENABLED = Field.create("ISMAPAVERAGINGENABLED", 1272, FieldType.BIT, 5);
public static final Field OVERRIDECRANKINGIACSETTING = Field.create("OVERRIDECRANKINGIACSETTING", 1272, FieldType.BIT, 6);
@ -3695,8 +3701,13 @@ public class Fields {
public static final Field GEARRATIO8 = Field.create("GEARRATIO8", 4636, FieldType.INT16);
public static final Field VVTACTIVATIONDELAYMS = Field.create("VVTACTIVATIONDELAYMS", 4638, FieldType.INT16);
public static final Field UNUSEDSHORT = Field.create("UNUSEDSHORT", 4640, FieldType.INT16);
public static final Field ALIGNMENTFILL_AT_4642 = Field.create("ALIGNMENTFILL_AT_4642", 4642, FieldType.INT8);
public static final Field MAINUNUSEDEND = Field.create("MAINUNUSEDEND", 4644, FieldType.INT);
public static final Field WWCLTBINS = Field.create("WWCLTBINS", 4642, FieldType.INT8);
public static final Field WWTAUCLTVALUES = Field.create("WWTAUCLTVALUES", 4650, FieldType.INT8);
public static final Field WWBETACLTVALUES = Field.create("WWBETACLTVALUES", 4658, FieldType.INT8);
public static final Field WWMAPBINS = Field.create("WWMAPBINS", 4666, FieldType.INT8);
public static final Field WWTAUMAPVALUES = Field.create("WWTAUMAPVALUES", 4674, FieldType.INT8);
public static final Field WWBETAMAPVALUES = Field.create("WWBETAMAPVALUES", 4682, FieldType.INT8);
public static final Field MAINUNUSEDEND = Field.create("MAINUNUSEDEND", 4690, FieldType.INT8);
public static final Field WARNING_MESSAGE = Field.create("WARNING_MESSAGE", 5020, 120, FieldType.STRING);
public static final Field AFTERSTARTCOOLANTBINS = Field.create("AFTERSTARTCOOLANTBINS", 5140, FieldType.FLOAT);
public static final Field AFTERSTARTHOLDTIME = Field.create("AFTERSTARTHOLDTIME", 5172, FieldType.FLOAT);
@ -4382,7 +4393,7 @@ public class Fields {
ISINJECTIONENABLED,
ISIGNITIONENABLED,
ISCYLINDERCLEANUPENABLED,
UNUSED1476B3,
COMPLEXWALLMODEL,
ALWAYSINSTANTRPM,
ISMAPAVERAGINGENABLED,
OVERRIDECRANKINGIACSETTING,
@ -4977,7 +4988,12 @@ public class Fields {
GEARRATIO8,
VVTACTIVATIONDELAYMS,
UNUSEDSHORT,
ALIGNMENTFILL_AT_4642,
WWCLTBINS,
WWTAUCLTVALUES,
WWBETACLTVALUES,
WWMAPBINS,
WWTAUMAPVALUES,
WWBETAMAPVALUES,
MAINUNUSEDEND,
WARNING_MESSAGE,
AFTERSTARTCOOLANTBINS,