rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

throttle pedal up switch for Miata NA6

This commit is contained in:
rusefi 2019-07-21 17:06:16 -04:00
parent 90d6c37ff8
commit 84955cdedb
18 changed files with 257 additions and 109 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
firmware/config/engines/mazda_miata_1_6.cpp
View File

@ -1,6 +1,10 @@
/*
* @file mazda_miata_1_6.cpp
*
*
* https://github.com/rusefi/rusefi_documentation/wiki/Frankenso_MazdaMiataNA6_pnp
*
*
* Frankenso board
* set engine_type 41
*

42
firmware/controllers/actuators/idle_thread.cpp
View File

@ -65,14 +65,6 @@ static float lastCrankingIacPosition;
static idle_state_e idleState = INIT;
/**
* that's current position with CLT and IAT corrections
*/
static percent_t currentIdlePosition = -100.0f;
/**
* the same as currentIdlePosition, but without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)
*/
static percent_t baseIdlePosition = currentIdlePosition;
/**
* When the IAC position value change is insignificant (lower than this threshold), leave the poor valve alone
* todo: why do we have this logic? is this ever useful?
@ -173,7 +165,7 @@ static void undoIdleBlipIfNeeded() {
}
percent_t getIdlePosition(void) {
return currentIdlePosition;
return engine->engineState.idle.currentIdlePosition;
}
/**
@ -191,7 +183,7 @@ static percent_t automaticIdleController() {
idleState = TPS_THRESHOLD;
// just leave IAC position as is (but don't return currentIdlePosition - it may already contain additionalAir)
return baseIdlePosition;
return engine->engineState.idle.baseIdlePosition;
}
// get Target RPM for Auto-PID from a separate table
@ -202,7 +194,7 @@ static percent_t automaticIdleController() {
if (absI(rpm - targetRpm) <= CONFIG(idlePidRpmDeadZone)) {
idleState = RPM_DEAD_ZONE;
// current RPM is close enough, no need to change anything
return baseIdlePosition;
return engine->engineState.idle.baseIdlePosition;
}
// When rpm < targetRpm, there's a risk of dropping RPM too low - and the engine dies out.
@ -222,7 +214,7 @@ static percent_t automaticIdleController() {
#if EFI_IDLE_INCREMENTAL_PID_CIC
// Treat the 'newValue' as if it contains not an actual IAC position, but an incremental delta.
// So we add this delta to the base IAC position, with a smooth taper for TPS transients.
newValue = baseIdlePosition + interpolateClamped(0.0f, newValue, CONFIGB(idlePidDeactivationTpsThreshold), 0.0f, tpsPos);
newValue = engine->engineState.idle.baseIdlePosition + interpolateClamped(0.0f, newValue, CONFIGB(idlePidDeactivationTpsThreshold), 0.0f, tpsPos);
// apply the PID limits
newValue = maxF(newValue, CONFIG(idleRpmPid.minValue));
@ -242,7 +234,7 @@ static percent_t automaticIdleController() {
newValue = interpolateClamped(idlePidLowerRpm, newValue, idlePidLowerRpm + CONFIG(idlePidRpmUpperLimit), iacPosForCoasting, rpm);
} else {
// Well, just leave it as is, without PID regulation...
newValue = baseIdlePosition;
newValue = engine->engineState.idle.baseIdlePosition;
}
}
@ -285,6 +277,9 @@ class IdleController : public PeriodicTimerController {
if (CONFIGB(clutchUpPin) != GPIO_UNASSIGNED) {
engine->clutchUpState = efiReadPin(CONFIGB(clutchUpPin));
}
if (CONFIG(throttlePedalUpPin) != GPIO_UNASSIGNED) {
engine->engineState.idle.throttleUpState = efiReadPin(CONFIG(throttlePedalUpPin));
}
if (engineConfiguration->brakePedalPin != GPIO_UNASSIGNED) {
engine->brakePedalState = efiReadPin(engineConfiguration->brakePedalPin);
@ -317,7 +312,7 @@ class IdleController : public PeriodicTimerController {
if (timeToStopBlip != 0) {
iacPosition = blipIdlePosition;
baseIdlePosition = iacPosition;
engine->engineState.idle.baseIdlePosition = iacPosition;
idleState = BLIP;
} else if (!isRunning) {
// during cranking it's always manual mode, PID would make no sense during cranking
@ -325,7 +320,7 @@ class IdleController : public PeriodicTimerController {
// save cranking position & cycles counter for taper transition
lastCrankingIacPosition = iacPosition;
lastCrankingCyclesCounter = engine->rpmCalculator.getRevolutionCounterSinceStart();
baseIdlePosition = iacPosition;
engine->engineState.idle.baseIdlePosition = iacPosition;
} else {
if (engineConfiguration->idleMode == IM_MANUAL) {
// let's re-apply CLT correction
@ -335,7 +330,7 @@ class IdleController : public PeriodicTimerController {
}
// store 'base' iacPosition without adjustments
baseIdlePosition = iacPosition;
engine->engineState.idle.baseIdlePosition = iacPosition;
percent_t tpsPos = getTPS(PASS_ENGINE_PARAMETER_SIGNATURE);
float additionalAir = (float)engineConfiguration->iacByTpsTaper;
@ -365,14 +360,14 @@ class IdleController : public PeriodicTimerController {
}
// The threshold is dependent on IAC type (see initIdleHardware())
if (absF(iacPosition - currentIdlePosition) < idlePositionSensitivityThreshold) {
if (absF(iacPosition - engine->engineState.idle.currentIdlePosition) < idlePositionSensitivityThreshold) {
idleState = (idle_state_e)(idleState | PWM_PRETTY_CLOSE);
return; // value is pretty close, let's leave the poor valve alone
}
currentIdlePosition = iacPosition;
engine->engineState.idle.currentIdlePosition = iacPosition;
idleState = (idle_state_e)(idleState | ADJUSTING);
applyIACposition(currentIdlePosition);
applyIACposition(engine->engineState.idle.currentIdlePosition);
}
};
@ -480,6 +475,10 @@ void startIdleThread(Logging*sharedLogger) {
// todo: re-initialize idle pins on the fly
initIdleHardware();
engine->engineState.idle.currentIdlePosition = -100.0f;
engine->engineState.idle.baseIdlePosition = -100.0f;
//scheduleMsg(logger, "initial idle %d", idlePositionController.value);
instance.Start();
@ -496,6 +495,11 @@ void startIdleThread(Logging*sharedLogger) {
getInputMode(CONFIGB(clutchUpPinMode)));
}
if (CONFIG(throttlePedalUpPin) != GPIO_UNASSIGNED) {
efiSetPadMode("clutch up switch", CONFIG(throttlePedalUpPin),
getInputMode(CONFIGB(throttlePedalUpPinMode)));
}
if (engineConfiguration->brakePedalPin != GPIO_UNASSIGNED) {
#if EFI_PROD_CODE
efiSetPadMode("brake pedal switch", engineConfiguration->brakePedalPin,

14
firmware/controllers/generated/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 12:15:43 EDT 2019
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 16:54:25 EDT 2019
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
@ -651,7 +651,11 @@ struct board_configuration_s {
/**
* offset 110
*/
uint8_t unusedMa2[2];
pin_input_mode_e throttlePedalUpPinMode;
/**
* offset 111
*/
uint8_t unusedMa2;
/**
* offset 112
*/
@ -1450,9 +1454,10 @@ struct engine_configuration_s {
*/
pin_output_mode_e tle6240_csPinMode;
/**
* Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata
* offset 583
*/
uint8_t unusedt;
switch_input_pin_e throttlePedalUpPin;
/**
* @see hasBaroSensor
* offset 584
@ -2244,6 +2249,7 @@ struct engine_configuration_s {
*/
brain_pin_e mc33816_driven;
/**
* Brake pedal switch
* offset 2608
*/
switch_input_pin_e brakePedalPin;
@ -2807,4 +2813,4 @@ typedef struct persistent_config_s persistent_config_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 12:15:43 EDT 2019
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 16:54:25 EDT 2019

112
firmware/controllers/generated/engine_state_generated.h
View File

@ -1,9 +1,65 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/engine_state.txt Sat Jul 20 12:28:04 EDT 2019
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/engine_state.txt Sun Jul 21 16:50:42 EDT 2019
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONTROLLERS_GENERATED_ENGINE_STATE_GENERATED_H
#define CONTROLLERS_GENERATED_ENGINE_STATE_GENERATED_H
#include "rusefi_types.h"
// start of pid_state_s
struct pid_state_s {
/**
* offset 0
*/
float iTerm = (float)0;
/**
* we are remembering this only for debugging purposes
* offset 4
*/
float dTerm = (float)0;
/**
* only used for logging
* offset 8
*/
float target = (float)0;
/**
* only used for logging
* offset 12
*/
float input = (float)0;
/**
* only used for logging
* offset 16
*/
float output = (float)0;
/** total size 20*/
};
typedef struct pid_state_s pid_state_s;
// start of idle_state_s
struct idle_state_s {
/**
* offset 0
*/
idle_state_e idleState = (idle_state_e)0;
/**
* that's current position with CLT and IAT corrections
* offset 4
*/
percent_t currentIdlePosition = (percent_t)0;
/**
* current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)
* offset 8
*/
percent_t baseIdlePosition = (percent_t)0;
/**
* offset 12
*/
int throttleUpState = (int)0;
/** total size 16*/
};
typedef struct idle_state_s idle_state_s;
// start of speed_density_s
struct speed_density_s {
/**
@ -13,33 +69,33 @@ struct speed_density_s {
* Speed-density logic: calculated air mass in one cylinder, in grams
* offset 4
*/
float airMassInOneCylinder = 0;
float airMassInOneCylinder = (float)0;
/**
* speed density
* Rate-of-change limiter is applied to degrees, so we store both Kelvin and degrees.
* offset 8
*/
float tCharge = 0;
float tCharge = (float)0;
/**
* offset 12
*/
float tChargeK = 0;
float tChargeK = (float)0;
/**
* offset 16
*/
float Tcharge_coff = 0;
float Tcharge_coff = (float)0;
/**
* offset 20
*/
floatms_t airFlow = 0;
floatms_t airFlow = (floatms_t)0;
/**
* offset 24
*/
float manifoldAirPressureAccelerationAdjustment = 0;
float manifoldAirPressureAccelerationAdjustment = (float)0;
/**
* offset 28
*/
float adjustedManifoldAirPressure = 0;
float adjustedManifoldAirPressure = (float)0;
/** total size 32*/
};
@ -54,36 +110,40 @@ struct engine_state2_s {
/**
* offset 32
*/
float targetAFR = 0;
/**
* offset 36
*/
float engineCycleDurationMs = 0;
/**
* offset 40
*/
float minRpmKcurrentTPS = 0;
/**
* offset 44
*/
int currentTpsAdc = 0;
idle_state_s idle;
/**
* offset 48
*/
float tpsVoltageMCU = 0;
float targetAFR = (float)0;
/**
* offset 52
*/
float tpsVoltageBoard = 0;
float engineCycleDurationMs = (float)0;
/**
* offset 56
*/
float currentBaroCorrectedVE = 0;
/** total size 60*/
float minRpmKcurrentTPS = (float)0;
/**
* offset 60
*/
int currentTpsAdc = (int)0;
/**
* offset 64
*/
float tpsVoltageMCU = (float)0;
/**
* offset 68
*/
float tpsVoltageBoard = (float)0;
/**
* offset 72
*/
float currentBaroCorrectedVE = (float)0;
/** total size 76*/
};
typedef struct engine_state2_s engine_state2_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/engine_state.txt Sat Jul 20 12:28:04 EDT 2019
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/engine_state.txt Sun Jul 21 16:50:42 EDT 2019

10
firmware/controllers/generated/rusefi_generated.h
View File

@ -1668,6 +1668,10 @@
#define test557pin_offset_hex c1d
#define throttlePedalPositionAdcChannel_offset 580
#define throttlePedalPositionAdcChannel_offset_hex 244
#define throttlePedalUpPin_offset 583
#define throttlePedalUpPin_offset_hex 247
#define throttlePedalUpPinMode_offset 710
#define throttlePedalUpPinMode_offset_hex 2c6
#define throttlePedalUpVoltage_offset 1884
#define throttlePedalUpVoltage_offset_hex 75c
#define throttlePedalWOTVoltage_offset 1888
@ -1832,8 +1836,8 @@
#define unusedFormerWarmupAfrPid_offset_hex 6dc
#define unusedh_offset 1471
#define unusedh_offset_hex 5bf
#define unusedMa2_offset 710
#define unusedMa2_offset_hex 2c6
#define unusedMa2_offset 711
#define unusedMa2_offset_hex 2c7
#define unusedOldWarmupAfr_offset 744
#define unusedOldWarmupAfr_offset_hex 2e8
#define unusedSpiPadding2_offset 804
@ -1850,8 +1854,6 @@
#define unusedSpiPadding7_offset_hex fa5
#define unusedSpiPadding8_offset 4009
#define unusedSpiPadding8_offset_hex fa9
#define unusedt_offset 583
#define unusedt_offset_hex 247
#define unuseduartPadding1_offset 808
#define unuseduartPadding1_offset_hex 328
#define unusuedsw_offset 4020

10
firmware/controllers/generated/thermistor.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/thermistor.txt Sat Jul 20 12:28:04 EDT 2019
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/thermistor.txt Sun Jul 21 16:36:56 EDT 2019
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONTROLLERS_GENERATED_THERMISTOR_H
@ -9,15 +9,15 @@ struct thermistor_state_s {
/**
* offset 0
*/
float resistance = 0;
float resistance = (float)0;
/**
* offset 4
*/
float voltageMCU = 0;
float voltageMCU = (float)0;
/**
* offset 8
*/
float voltageBoard = 0;
float voltageBoard = (float)0;
/** total size 12*/
};
@ -25,4 +25,4 @@ typedef struct thermistor_state_s thermistor_state_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/thermistor.txt Sat Jul 20 12:28:04 EDT 2019
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/thermistor.txt Sun Jul 21 16:36:56 EDT 2019

8
firmware/controllers/generated/wall_fuel.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/wall_fuel.txt Sat Jul 20 12:28:05 EDT 2019
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/wall_fuel.txt Sun Jul 21 16:36:58 EDT 2019
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONTROLLERS_GENERATED_WALL_FUEL_H
@ -10,12 +10,12 @@ struct wall_fuel_state {
* * fuel injection time correction to account for wall wetting effect, for current cycle
* offset 0
*/
float wallFuelCorrection = 0;
float wallFuelCorrection = (float)0;
/**
* Amount of fuel on the wall, in ms of injector open time, for each injector.
* offset 4
*/
floatms_t wallFuel = 0;
floatms_t wallFuel = (floatms_t)0;
/** total size 8*/
};
@ -23,4 +23,4 @@ typedef struct wall_fuel_state wall_fuel_state;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/wall_fuel.txt Sat Jul 20 12:28:05 EDT 2019
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/wall_fuel.txt Sun Jul 21 16:36:58 EDT 2019

21
firmware/integration/engine_state.txt
View File

@ -1,4 +1,22 @@
struct_no_prefix pid_state_s
float iTerm;
float dTerm;we are remembering this only for debugging purposes
float target;only used for logging
float input;only used for logging
float output;only used for logging
end_struct
struct_no_prefix idle_state_s
idle_state_e idleState
percent_t currentIdlePosition;that's current position with CLT and IAT corrections
percent_t baseIdlePosition;current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)
int throttleUpState
end_struct
struct_no_prefix engine_state2_s
@ -25,6 +43,9 @@ end_struct
speed_density_s sd;
idle_state_s idle;
float targetAFR

7
firmware/integration/rusefi_config.txt
View File

@ -474,7 +474,7 @@ adc_channel_e throttlePedalPositionAdcChannel;Electronic throttle pedal position
brain_pin_e tle6240_cs;
pin_output_mode_e tle6240_csPinMode;
uint8_t[1] unusedt;
switch_input_pin_e throttlePedalUpPin;+Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata
air_pressure_sensor_config_s baroSensor;@see hasBaroSensor
@ -566,7 +566,8 @@ custom adc_channel_mode_e 4 bits, U32, @OFFSET@, [0:1], "Off", "Slow", "Fas
brain_pin_e canTxPin;
brain_pin_e canRxPin;
uint8_t[2] unusedMa2;
pin_input_mode_e throttlePedalUpPinMode;
uint8_t[1] unusedMa2;
int idleThreadPeriodMs;
int consoleLoopPeriodMs;
@ -960,7 +961,7 @@ float[MAP_ACCEL_TAPER] mapAccelTaperMult;;"mult", 1, 0, 0.0, 300,
brain_pin_e mc33816_rstb;ResetB
brain_pin_e mc33816_driven
switch_input_pin_e brakePedalPin
switch_input_pin_e brakePedalPin;Brake pedal switch
adc_channel_e cj125ua;lambda input
adc_channel_e cj125ur;heater input
pin_input_mode_e brakePedalPinMode;

15
firmware/tunerstudio/rusefi.ini
View File

@ -82,7 +82,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Thu Jul 18 18:26:35 EDT 2019
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 16:54:25 EDT 2019
pageSize = 20000
page = 1
@ -226,7 +226,7 @@ page = 1
throttlePedalPositionAdcChannel = bits, U08, 580, [0:4] "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "Disabled", "PB12", "PB13", "PC14", "PC15", "PC16", "PC17", "PD3", "PD4", "PE2", "PE6", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
tle6240_cs = bits, U08, 581, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
tle6240_csPinMode = bits, U08, 582, [0:1], "default", "default inverted", "open collector", "open collector inverted"
;no TS info - skipping unusedt offset 583
throttlePedalUpPin = bits, U08, 583, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
baroSensor_lowValue = scalar, F32, 584, "kpa", 1, 0, -400, 800, 2
baroSensor_highValue = scalar, F32, 588, "kpa", 1, 0, -400, 800, 2
baroSensor_type = bits, U32, 592, [0:3] "Custom", "DENSO183", "MPX4250", "HONDA3BAR", "NEON_2003", "22012AA090", "3 Bar", "MPX4100", "Toyota 89420-02010", "MPX4250A", "INVALID"
@ -315,7 +315,8 @@ page = 1
sdCardCsPin = bits, U08, 707, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
canTxPin = bits, U08, 708, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
canRxPin = bits, U08, 709, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
;no TS info - skipping unusedMa2 offset 710
throttlePedalUpPinMode = scalar, U08, 710, "todo", 1, 0, 0, 20, 1
;no TS info - skipping unusedMa2 offset 711
;no TS info - skipping idleThreadPeriodMs offset 712
;no TS info - skipping consoleLoopPeriodMs offset 716
;no TS info - skipping lcdThreadPeriodMs offset 720
@ -990,6 +991,7 @@ page = 1
camInputs2 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
camInputs3 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
triggerSimulatorFrequency = "See also triggerSimulatorPins\nSee also directSelfStimulation\nrpm X"
tachOutputPin = "This implementation produces one pulse per engine cycle. See also dizzySparkOutputPin."
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
@ -2527,11 +2529,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
dialog = otherSensorInputs, "Other Sensor Inputs"
field = "Fuel level", fuelLevelSensor
field = "Flex fuel", flexFuelSensor
field = "Clutch down pin", clutchDownPin
field = "Clutch down switch", clutchDownPin
field = "Clutch down inverted", clutchDownPinInverted
field = "Clutch up pin", clutchUpPin
field = "Clutch up switch", clutchUpPin
field = "Clutch up inverted", clutchUpPinInverted
field = "Brake pedal pin", brakePedalPin
field = "Throttle Up switch", throttlePedalUpPin
field = "Brake pedal switch", brakePedalPin
field = "A/C switch", acSwitchAdc
dialog = triggerInputs, "Trigger Inputs"

7
firmware/tunerstudio/rusefi.input
View File

@ -1552,11 +1552,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
dialog = otherSensorInputs, "Other Sensor Inputs"
field = "Fuel level", fuelLevelSensor
field = "Flex fuel", flexFuelSensor
field = "Clutch down pin", clutchDownPin
field = "Clutch down switch", clutchDownPin
field = "Clutch down inverted", clutchDownPinInverted
field = "Clutch up pin", clutchUpPin
field = "Clutch up switch", clutchUpPin
field = "Clutch up inverted", clutchUpPinInverted
field = "Brake pedal pin", brakePedalPin
field = "Throttle Up switch", throttlePedalUpPin
field = "Brake pedal switch", brakePedalPin
field = "A/C switch", acSwitchAdc
dialog = triggerInputs, "Trigger Inputs"

15
firmware/tunerstudio/rusefi_frankenso.ini
View File

@ -82,7 +82,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Thu Jul 18 18:26:39 EDT 2019
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 16:54:30 EDT 2019
pageSize = 20000
page = 1
@ -226,7 +226,7 @@ page = 1
throttlePedalPositionAdcChannel = bits, U08, 580, [0:4] "Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E","NONE","INVALID","INVALID","INVALID"
tle6240_cs = bits, U08, 581, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
tle6240_csPinMode = bits, U08, 582, [0:1], "default", "default inverted", "open collector", "open collector inverted"
;no TS info - skipping unusedt offset 583
throttlePedalUpPin = bits, U08, 583, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
baroSensor_lowValue = scalar, F32, 584, "kpa", 1, 0, -400, 800, 2
baroSensor_highValue = scalar, F32, 588, "kpa", 1, 0, -400, 800, 2
baroSensor_type = bits, U32, 592, [0:3] "Custom", "DENSO183", "MPX4250", "HONDA3BAR", "NEON_2003", "22012AA090", "3 Bar", "MPX4100", "Toyota 89420-02010", "MPX4250A", "INVALID"
@ -315,7 +315,8 @@ page = 1
sdCardCsPin = bits, U08, 707, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
canTxPin = bits, U08, 708, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
canRxPin = bits, U08, 709, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
;no TS info - skipping unusedMa2 offset 710
throttlePedalUpPinMode = scalar, U08, 710, "todo", 1, 0, 0, 20, 1
;no TS info - skipping unusedMa2 offset 711
;no TS info - skipping idleThreadPeriodMs offset 712
;no TS info - skipping consoleLoopPeriodMs offset 716
;no TS info - skipping lcdThreadPeriodMs offset 720
@ -990,6 +991,7 @@ page = 1
camInputs2 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
camInputs3 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
triggerSimulatorFrequency = "See also triggerSimulatorPins\nSee also directSelfStimulation\nrpm X"
tachOutputPin = "This implementation produces one pulse per engine cycle. See also dizzySparkOutputPin."
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
@ -2527,11 +2529,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
dialog = otherSensorInputs, "Other Sensor Inputs"
field = "Fuel level", fuelLevelSensor
field = "Flex fuel", flexFuelSensor
field = "Clutch down pin", clutchDownPin
field = "Clutch down switch", clutchDownPin
field = "Clutch down inverted", clutchDownPinInverted
field = "Clutch up pin", clutchUpPin
field = "Clutch up switch", clutchUpPin
field = "Clutch up inverted", clutchUpPinInverted
field = "Brake pedal pin", brakePedalPin
field = "Throttle Up switch", throttlePedalUpPin
field = "Brake pedal switch", brakePedalPin
field = "A/C switch", acSwitchAdc
dialog = triggerInputs, "Trigger Inputs"

15
firmware/tunerstudio/rusefi_microrusefi.ini
View File

@ -82,7 +82,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Thu Jul 18 18:26:37 EDT 2019
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 16:54:28 EDT 2019
pageSize = 20000
page = 1
@ -226,7 +226,7 @@ page = 1
throttlePedalPositionAdcChannel = bits, U08, 580, [0:4] "18 - AN temp 1","23 - AN temp 2","24 - AN temp 3","22 - AN temp 4","19 - AN volt 10","INVALID","32 - AN volt 2","31 - AN volt 3","36 - AN volt 8","40 - AN volt 9","27 - AN-VOLT-1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6","30 - AN volt 7","NONE","INVALID","INVALID","INVALID"
tle6240_cs = bits, U08, 581, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
tle6240_csPinMode = bits, U08, 582, [0:1], "default", "default inverted", "open collector", "open collector inverted"
;no TS info - skipping unusedt offset 583
throttlePedalUpPin = bits, U08, 583, [0:7], "NONE","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","Brake Switch","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","Clutch Switch","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID"
baroSensor_lowValue = scalar, F32, 584, "kpa", 1, 0, -400, 800, 2
baroSensor_highValue = scalar, F32, 588, "kpa", 1, 0, -400, 800, 2
baroSensor_type = bits, U32, 592, [0:3] "Custom", "DENSO183", "MPX4250", "HONDA3BAR", "NEON_2003", "22012AA090", "3 Bar", "MPX4100", "Toyota 89420-02010", "MPX4250A", "INVALID"
@ -315,7 +315,8 @@ page = 1
sdCardCsPin = bits, U08, 707, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
canTxPin = bits, U08, 708, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
canRxPin = bits, U08, 709, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
;no TS info - skipping unusedMa2 offset 710
throttlePedalUpPinMode = scalar, U08, 710, "todo", 1, 0, 0, 20, 1
;no TS info - skipping unusedMa2 offset 711
;no TS info - skipping idleThreadPeriodMs offset 712
;no TS info - skipping consoleLoopPeriodMs offset 716
;no TS info - skipping lcdThreadPeriodMs offset 720
@ -990,6 +991,7 @@ page = 1
camInputs2 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
camInputs3 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
triggerSimulatorFrequency = "See also triggerSimulatorPins\nSee also directSelfStimulation\nrpm X"
tachOutputPin = "This implementation produces one pulse per engine cycle. See also dizzySparkOutputPin."
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
@ -2520,11 +2522,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
dialog = otherSensorInputs, "Other Sensor Inputs"
field = "Fuel level", fuelLevelSensor
field = "Flex fuel", flexFuelSensor
field = "Clutch down pin", clutchDownPin
field = "Clutch down switch", clutchDownPin
field = "Clutch down inverted", clutchDownPinInverted
field = "Clutch up pin", clutchUpPin
field = "Clutch up switch", clutchUpPin
field = "Clutch up inverted", clutchUpPinInverted
field = "Brake pedal pin", brakePedalPin
field = "Throttle Up switch", throttlePedalUpPin
field = "Brake pedal switch", brakePedalPin
field = "A/C switch", acSwitchAdc
dialog = triggerInputs, "Trigger Inputs"

15
firmware/tunerstudio/rusefi_prometheus.ini
View File

@ -82,7 +82,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Thu Jul 18 18:26:41 EDT 2019
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 16:54:32 EDT 2019
pageSize = 20000
page = 1
@ -226,7 +226,7 @@ page = 1
throttlePedalPositionAdcChannel = bits, U08, 580, [0:4] "Analog 3O","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","NONE","INVALID","INVALID","INVALID"
tle6240_cs = bits, U08, 581, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
tle6240_csPinMode = bits, U08, 582, [0:1], "default", "default inverted", "open collector", "open collector inverted"
;no TS info - skipping unusedt offset 583
throttlePedalUpPin = bits, U08, 583, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
baroSensor_lowValue = scalar, F32, 584, "kpa", 1, 0, -400, 800, 2
baroSensor_highValue = scalar, F32, 588, "kpa", 1, 0, -400, 800, 2
baroSensor_type = bits, U32, 592, [0:3] "Custom", "DENSO183", "MPX4250", "HONDA3BAR", "NEON_2003", "22012AA090", "3 Bar", "MPX4100", "Toyota 89420-02010", "MPX4250A", "INVALID"
@ -315,7 +315,8 @@ page = 1
sdCardCsPin = bits, U08, 707, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
canTxPin = bits, U08, 708, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
canRxPin = bits, U08, 709, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
;no TS info - skipping unusedMa2 offset 710
throttlePedalUpPinMode = scalar, U08, 710, "todo", 1, 0, 0, 20, 1
;no TS info - skipping unusedMa2 offset 711
;no TS info - skipping idleThreadPeriodMs offset 712
;no TS info - skipping consoleLoopPeriodMs offset 716
;no TS info - skipping lcdThreadPeriodMs offset 720
@ -990,6 +991,7 @@ page = 1
camInputs2 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
camInputs3 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
triggerSimulatorFrequency = "See also triggerSimulatorPins\nSee also directSelfStimulation\nrpm X"
tachOutputPin = "This implementation produces one pulse per engine cycle. See also dizzySparkOutputPin."
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
@ -2523,11 +2525,12 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
dialog = otherSensorInputs, "Other Sensor Inputs"
field = "Fuel level", fuelLevelSensor
field = "Flex fuel", flexFuelSensor
field = "Clutch down pin", clutchDownPin
field = "Clutch down switch", clutchDownPin
field = "Clutch down inverted", clutchDownPinInverted
field = "Clutch up pin", clutchUpPin
field = "Clutch up switch", clutchUpPin
field = "Clutch up inverted", clutchUpPinInverted
field = "Brake pedal pin", brakePedalPin
field = "Throttle Up switch", throttlePedalUpPin
field = "Brake pedal switch", brakePedalPin
field = "A/C switch", acSwitchAdc
dialog = triggerInputs, "Trigger Inputs"

42
java_console/models/src/com/rusefi/config/generated/EngineState.java
View File

@ -1,11 +1,20 @@
package com.rusefi.config.generated;
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/engine_state.txt Sat Jul 20 12:28:04 EDT 2019
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/engine_state.txt Sun Jul 21 16:50:42 EDT 2019
// by class com.rusefi.output.JavaFieldsConsumer
import com.rusefi.config.*;
public class EngineState {
public static final Field ITERM = Field.create("ITERM", 0, FieldType.FLOAT);
public static final Field DTERM = Field.create("DTERM", 4, FieldType.FLOAT);
public static final Field TARGET = Field.create("TARGET", 8, FieldType.FLOAT);
public static final Field INPUT = Field.create("INPUT", 12, FieldType.FLOAT);
public static final Field OUTPUT = Field.create("OUTPUT", 16, FieldType.FLOAT);
public static final Field IDLESTATE = Field.create("IDLESTATE", 0, FieldType.INT);
public static final Field CURRENTIDLEPOSITION = Field.create("CURRENTIDLEPOSITION", 4, FieldType.FLOAT);
public static final Field BASEIDLEPOSITION = Field.create("BASEIDLEPOSITION", 8, FieldType.FLOAT);
public static final Field THROTTLEUPSTATE = Field.create("THROTTLEUPSTATE", 12, FieldType.INT);
public static final Field ISTCHARGEAIRMODEL = Field.create("ISTCHARGEAIRMODEL", 0, FieldType.BIT, 0);
public static final Field AIRMASSINONECYLINDER = Field.create("AIRMASSINONECYLINDER", 4, FieldType.FLOAT);
public static final Field TCHARGE = Field.create("TCHARGE", 8, FieldType.FLOAT);
@ -14,14 +23,27 @@ public class EngineState {
public static final Field AIRFLOW = Field.create("AIRFLOW", 20, FieldType.FLOAT);
public static final Field MANIFOLDAIRPRESSUREACCELERATIONADJUSTMENT = Field.create("MANIFOLDAIRPRESSUREACCELERATIONADJUSTMENT", 24, FieldType.FLOAT);
public static final Field ADJUSTEDMANIFOLDAIRPRESSURE = Field.create("ADJUSTEDMANIFOLDAIRPRESSURE", 28, FieldType.FLOAT);
public static final Field TARGETAFR = Field.create("TARGETAFR", 32, FieldType.FLOAT);
public static final Field ENGINECYCLEDURATIONMS = Field.create("ENGINECYCLEDURATIONMS", 36, FieldType.FLOAT);
public static final Field MINRPMKCURRENTTPS = Field.create("MINRPMKCURRENTTPS", 40, FieldType.FLOAT);
public static final Field CURRENTTPSADC = Field.create("CURRENTTPSADC", 44, FieldType.INT);
public static final Field TPSVOLTAGEMCU = Field.create("TPSVOLTAGEMCU", 48, FieldType.FLOAT);
public static final Field TPSVOLTAGEBOARD = Field.create("TPSVOLTAGEBOARD", 52, FieldType.FLOAT);
public static final Field CURRENTBAROCORRECTEDVE = Field.create("CURRENTBAROCORRECTEDVE", 56, FieldType.FLOAT);
public static final Field IDLESTATE = Field.create("IDLESTATE", 32, FieldType.INT);
public static final Field CURRENTIDLEPOSITION = Field.create("CURRENTIDLEPOSITION", 36, FieldType.FLOAT);
public static final Field BASEIDLEPOSITION = Field.create("BASEIDLEPOSITION", 40, FieldType.FLOAT);
public static final Field THROTTLEUPSTATE = Field.create("THROTTLEUPSTATE", 44, FieldType.INT);
public static final Field TARGETAFR = Field.create("TARGETAFR", 48, FieldType.FLOAT);
public static final Field ENGINECYCLEDURATIONMS = Field.create("ENGINECYCLEDURATIONMS", 52, FieldType.FLOAT);
public static final Field MINRPMKCURRENTTPS = Field.create("MINRPMKCURRENTTPS", 56, FieldType.FLOAT);
public static final Field CURRENTTPSADC = Field.create("CURRENTTPSADC", 60, FieldType.INT);
public static final Field TPSVOLTAGEMCU = Field.create("TPSVOLTAGEMCU", 64, FieldType.FLOAT);
public static final Field TPSVOLTAGEBOARD = Field.create("TPSVOLTAGEBOARD", 68, FieldType.FLOAT);
public static final Field CURRENTBAROCORRECTEDVE = Field.create("CURRENTBAROCORRECTEDVE", 72, FieldType.FLOAT);
public static final Field[] VALUES = {
ITERM,
DTERM,
TARGET,
INPUT,
OUTPUT,
IDLESTATE,
CURRENTIDLEPOSITION,
BASEIDLEPOSITION,
THROTTLEUPSTATE,
ISTCHARGEAIRMODEL,
AIRMASSINONECYLINDER,
TCHARGE,
@ -30,6 +52,10 @@ public class EngineState {
AIRFLOW,
MANIFOLDAIRPRESSUREACCELERATIONADJUSTMENT,
ADJUSTEDMANIFOLDAIRPRESSURE,
IDLESTATE,
CURRENTIDLEPOSITION,
BASEIDLEPOSITION,
THROTTLEUPSTATE,
TARGETAFR,
ENGINECYCLEDURATIONMS,
MINRPMKCURRENTTPS,

19
java_console/models/src/com/rusefi/config/generated/Fields.java
View File

@ -1,6 +1,6 @@
package com.rusefi.config.generated;
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 12:15:43 EDT 2019
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Jul 21 16:54:25 EDT 2019
// by class com.rusefi.output.JavaFieldsConsumer
import com.rusefi.config.*;
@ -1078,6 +1078,9 @@ public class Fields {
public static final int test557pin_offset = 3101;
public static final int throttlePedalPositionAdcChannel_offset = 580;
public static final int throttlePedalPositionAdcChannel_offset_hex = 244;
public static final int throttlePedalUpPin_offset = 583;
public static final int throttlePedalUpPin_offset_hex = 247;
public static final int throttlePedalUpPinMode_offset = 710;
public static final int throttlePedalUpVoltage_offset = 1884;
public static final int throttlePedalWOTVoltage_offset = 1888;
public static final int throttlePedalWOTVoltage_offset_hex = 760;
@ -1178,7 +1181,7 @@ public class Fields {
public static final int unusedAtBoardConfigurationEnd_offset = 980;
public static final int unusedFormerWarmupAfrPid_offset = 1756;
public static final int unusedh_offset = 1471;
public static final int unusedMa2_offset = 710;
public static final int unusedMa2_offset = 711;
public static final int unusedOldWarmupAfr_offset = 744;
public static final int unusedSpiPadding2_offset = 804;
public static final int unusedSpiPadding2_offset_hex = 324;
@ -1188,8 +1191,6 @@ public class Fields {
public static final int unusedSpiPadding6_offset = 4002;
public static final int unusedSpiPadding7_offset = 4005;
public static final int unusedSpiPadding8_offset = 4009;
public static final int unusedt_offset = 583;
public static final int unusedt_offset_hex = 247;
public static final int unuseduartPadding1_offset = 808;
public static final int unuseduartPadding1_offset_hex = 328;
public static final int unusuedsw_offset = 4020;
@ -1382,7 +1383,8 @@ public class Fields {
public static final Field TLE6240_CS = Field.create("TLE6240_CS", 581, FieldType.INT8, brain_pin_e);
public static final String[] pin_output_mode_e = {"default", "default inverted", "open collector", "open collector inverted"};
public static final Field TLE6240_CSPINMODE = Field.create("TLE6240_CSPINMODE", 582, FieldType.INT8, pin_output_mode_e);
public static final Field UNUSEDT = Field.create("UNUSEDT", 583, FieldType.INT8);
public static final String[] switch_input_pin_e = {"NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"};
public static final Field THROTTLEPEDALUPPIN = Field.create("THROTTLEPEDALUPPIN", 583, FieldType.INT8, switch_input_pin_e);
public static final Field BAROSENSOR_LOWVALUE = Field.create("BAROSENSOR_LOWVALUE", 584, FieldType.FLOAT);
public static final Field BAROSENSOR_HIGHVALUE = Field.create("BAROSENSOR_HIGHVALUE", 588, FieldType.FLOAT);
public static final Field BAROSENSOR_TYPE = Field.create("BAROSENSOR_TYPE", 592, FieldType.INT);
@ -1437,7 +1439,6 @@ public class Fields {
public static final Field MALFUNCTIONINDICATORPINMODE = Field.create("MALFUNCTIONINDICATORPINMODE", 661, FieldType.INT8, pin_output_mode_e);
public static final Field FANPINMODE = Field.create("FANPINMODE", 662, FieldType.INT8, pin_output_mode_e);
public static final Field FANPIN = Field.create("FANPIN", 663, FieldType.INT8, output_pin_e);
public static final String[] switch_input_pin_e = {"NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6","PE7","PE8","PE9","PE10","PE11","PE12","PE13","PE14","PE15", "PF0","PF1","PF2","PF3","PF4","PF5","PF6","PF7","PF8","PF9","PF10","PF11","PF12","PF13","PF14","PF15", "PG0","PG1","PG2","PG3","PG4","PG5","PG6","PG7","PG8","PG9","PG10","PG11","PG12","PG13","PG14","PG15", "PH0","PH1","PH2","PH3","PH4","PH5","PH6","PH7","PH8","PH9","PH10","PH11","PH12","PH13","PH14","PH15","INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"};
public static final Field CLUTCHDOWNPIN = Field.create("CLUTCHDOWNPIN", 664, FieldType.INT8, switch_input_pin_e);
public static final Field ALTERNATORCONTROLPIN = Field.create("ALTERNATORCONTROLPIN", 665, FieldType.INT8, output_pin_e);
public static final Field ALTERNATORCONTROLPINMODE = Field.create("ALTERNATORCONTROLPINMODE", 666, FieldType.INT8, pin_output_mode_e);
@ -1473,6 +1474,8 @@ public class Fields {
public static final Field SDCARDCSPIN = Field.create("SDCARDCSPIN", 707, FieldType.INT8, brain_pin_e);
public static final Field CANTXPIN = Field.create("CANTXPIN", 708, FieldType.INT8, brain_pin_e);
public static final Field CANRXPIN = Field.create("CANRXPIN", 709, FieldType.INT8, brain_pin_e);
public static final Field THROTTLEPEDALUPPINMODE = Field.create("THROTTLEPEDALUPPINMODE", 710, FieldType.INT8);
public static final Field UNUSEDMA2 = Field.create("UNUSEDMA2", 711, FieldType.INT8);
public static final Field IDLETHREADPERIODMS = Field.create("IDLETHREADPERIODMS", 712, FieldType.INT);
public static final Field CONSOLELOOPPERIODMS = Field.create("CONSOLELOOPPERIODMS", 716, FieldType.INT);
public static final Field LCDTHREADPERIODMS = Field.create("LCDTHREADPERIODMS", 720, FieldType.INT);
@ -2155,7 +2158,7 @@ public class Fields {
THROTTLEPEDALPOSITIONADCCHANNEL,
TLE6240_CS,
TLE6240_CSPINMODE,
UNUSEDT,
THROTTLEPEDALUPPIN,
BAROSENSOR_LOWVALUE,
BAROSENSOR_HIGHVALUE,
BAROSENSOR_TYPE,
@ -2243,6 +2246,8 @@ public class Fields {
SDCARDCSPIN,
CANTXPIN,
CANRXPIN,
THROTTLEPEDALUPPINMODE,
UNUSEDMA2,
IDLETHREADPERIODMS,
CONSOLELOOPPERIODMS,
LCDTHREADPERIODMS,

7
java_tools/configuration_definition/src/com/rusefi/TypesHelper.java
View File

@ -48,7 +48,10 @@ public class TypesHelper {
}
private static boolean isPrimitive4byte(String type) {
return type.equals(INT_32_T) || type.equals(UINT_32_T) || isFloat(type);
return type.equals(INT_32_T) || type.equals(UINT_32_T)
// todo: something smarter with dynamic type definition?
|| type.equals("idle_state_e")
|| isFloat(type);
}
public static String convertToTs(String type) {
@ -72,7 +75,9 @@ public class TypesHelper {
public static boolean isFloat(String type) {
return FLOAT_T.equals(type) ||
// todo: something smarter with dynamic type definition?
type.equalsIgnoreCase("floatms_t") ||
type.equalsIgnoreCase("percent_t") ||
type.equalsIgnoreCase("angle_t");
}
}

3
java_tools/configuration_definition/src/com/rusefi/output/CHeaderConsumer.java
View File

@ -41,7 +41,8 @@ public class CHeaderConsumer implements ConfigurationConsumer {
// not an array
cEntry += "\t" + configField.getType() + " " + configField.getName();
if (ConfigDefinition.needZeroInit && TypesHelper.isPrimitive(configField.getType())) {
cEntry += " = 0";
// we need this cast in case of enums
cEntry += " = (" + configField.getType() + ")0";
}
cEntry += ";" + EOL;
} else {