diff --git a/firmware/config/boards/hellen/hellen72/board_configuration.cpp b/firmware/config/boards/hellen/hellen72/board_configuration.cpp
index 9c520ebcba..8f0ab9167b 100644
--- a/firmware/config/boards/hellen/hellen72/board_configuration.cpp
+++ b/firmware/config/boards/hellen/hellen72/board_configuration.cpp
@@ -93,6 +93,11 @@ void setBoardConfigOverrides() {
 	setHellen176LedPins();
 	setupVbatt();
 	setSdCardConfigurationOverrides();
+	
+	engineConfiguration->etbIo[0].directionPin1 = Gpio::C7; // out_pwm3
+	engineConfiguration->etbIo[0].directionPin2 = Gpio::C8; // out_pwm4
+	engineConfiguration->etbIo[0].controlPin = Gpio::C6; // ETB_EN out_pwm2
+	engineConfiguration->etb_use_two_wires = true;
 
 	engineConfiguration->clt.config.bias_resistor = 4700;
 	engineConfiguration->iat.config.bias_resistor = 4700;
@@ -147,11 +152,6 @@ void setBoardDefaultConfiguration() {
 
 	// "required" hardware is done - set some reasonable defaults
 	setupDefaultSensorInputs();
-	
-	engineConfiguration->etbIo[0].directionPin1 = Gpio::C7; // out_pwm3
-	engineConfiguration->etbIo[0].directionPin2 = Gpio::C8; // out_pwm4
-	engineConfiguration->etbIo[0].controlPin = Gpio::C6; // ETB_EN out_pwm2
-	engineConfiguration->etb_use_two_wires = true;
 
 	engineConfiguration->specs.cylindersCount = 4;
 	engineConfiguration->specs.firingOrder = FO_1_3_4_2;