diff --git a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h index cc69a47850..295accb613 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h @@ -391,11 +391,11 @@ #define GAUGE_NAME_AFR "Air/Fuel Ratio" #define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2" #define GAUGE_NAME_AIR_FLOW_ESTIMATE "MAF estimate" -#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF sensor" -#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF sensor 2" +#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF" +#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF #2" #define GAUGE_NAME_AIR_MASS "air mass" -#define GAUGE_NAME_AUX_LINEAR_1 "Aux Linear 1" -#define GAUGE_NAME_AUX_LINEAR_2 "Aux Linear 2" +#define GAUGE_NAME_AUX_LINEAR_1 "Aux Linear #1" +#define GAUGE_NAME_AUX_LINEAR_2 "Aux Linear #2" #define GAUGE_NAME_AUX_TEMP1 "Aux temp 1" #define GAUGE_NAME_AUX_TEMP2 "Aux temp 2" #define GAUGE_NAME_BARO_PRESSURE "Barometric pressure" @@ -1026,7 +1026,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_41091 +#define SIGNATURE_HASH snap_8981 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1298,7 +1298,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.10.cypress.snap_41091" +#define TS_SIGNATURE "rusEFI 2022.11.10.cypress.snap_8981" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h index 2d3df1cd6b..c6b77eec62 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h @@ -391,11 +391,11 @@ #define GAUGE_NAME_AFR "Air/Fuel Ratio" #define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2" #define GAUGE_NAME_AIR_FLOW_ESTIMATE "MAF estimate" -#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF sensor" -#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF sensor 2" +#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF" +#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF #2" #define GAUGE_NAME_AIR_MASS "air mass" -#define GAUGE_NAME_AUX_LINEAR_1 "Aux Linear 1" -#define GAUGE_NAME_AUX_LINEAR_2 "Aux Linear 2" +#define GAUGE_NAME_AUX_LINEAR_1 "Aux Linear #1" +#define GAUGE_NAME_AUX_LINEAR_2 "Aux Linear #2" #define GAUGE_NAME_AUX_TEMP1 "Aux temp 1" #define GAUGE_NAME_AUX_TEMP2 "Aux temp 2" #define GAUGE_NAME_BARO_PRESSURE "Barometric pressure" @@ -1026,7 +1026,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_591 +#define SIGNATURE_HASH snap_33241 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1298,7 +1298,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.10.kin.snap_591" +#define TS_SIGNATURE "rusEFI 2022.11.10.kin.snap_33241" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h index 4a188a5878..5054b1b059 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h @@ -401,11 +401,11 @@ #define GAUGE_NAME_AFR "Air/Fuel Ratio" #define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2" #define GAUGE_NAME_AIR_FLOW_ESTIMATE "MAF estimate" -#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF sensor" -#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF sensor 2" +#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF" +#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF #2" #define GAUGE_NAME_AIR_MASS "air mass" -#define GAUGE_NAME_AUX_LINEAR_1 "Aux Linear 1" -#define GAUGE_NAME_AUX_LINEAR_2 "Aux Linear 2" +#define GAUGE_NAME_AUX_LINEAR_1 "Aux Linear #1" +#define GAUGE_NAME_AUX_LINEAR_2 "Aux Linear #2" #define GAUGE_NAME_AUX_TEMP1 "Aux temp 1" #define GAUGE_NAME_AUX_TEMP2 "Aux temp 2" #define GAUGE_NAME_BARO_PRESSURE "Barometric pressure" @@ -992,7 +992,7 @@ #define show_Frankenso_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH snap_31065 +#define SIGNATURE_HASH snap_64207 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1265,7 +1265,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.10.subaru_eg33_f7.snap_31065" +#define TS_SIGNATURE "rusEFI 2022.11.10.subaru_eg33_f7.snap_64207" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/console/binary/generated/data_logs.ini b/firmware/console/binary/generated/data_logs.ini index 6f9c695380..2a920bf755 100644 --- a/firmware/console/binary/generated/data_logs.ini +++ b/firmware/console/binary/generated/data_logs.ini @@ -32,7 +32,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -189,8 +189,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -295,7 +295,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/console/binary/generated/gauges.ini b/firmware/console/binary/generated/gauges.ini index 13c21faf08..4e5b688585 100644 --- a/firmware/console/binary/generated/gauges.ini +++ b/firmware/console/binary/generated/gauges.ini @@ -43,7 +43,7 @@ TPSValueGauge = TPSValue,"TPS", "%", 0.0,0.0, 0.0,0.0, 0.0,0.0, 2,2 throttlePedalPositionGauge = throttlePedalPosition,"Throttle pedal position", "%", 0.0,0.0, 0.0,0.0, 0.0,0.0, 2,2 tpsADCGauge = tpsADC,"tpsADC", "ADC", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 rawMafGauge = rawMaf,"rawMaf", "V", 0.0,5.0, 0.0,5.0, 0.0,5.0, 3,3 -mafMeasuredGauge = mafMeasured,"MAF sensor", "kg/h", 0.0,0.0, 0.0,0.0, 0.0,0.0, 1,1 +mafMeasuredGauge = mafMeasured,"MAF", "kg/h", 0.0,0.0, 0.0,0.0, 0.0,0.0, 1,1 MAPValueGauge = MAPValue,"MAP", "kPa", 0.0,0.0, 0.0,0.0, 0.0,0.0, 1,1 baroPressureGauge = baroPressure,"baroPressure", "kPa", 0.0,0.0, 0.0,0.0, 0.0,0.0, 1,1 lambdaValueGauge = lambdaValue,"Lambda", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 3,3 @@ -230,8 +230,8 @@ tcRatioGauge = tcRatio,"Torque Converter Ratio", "value", 0.0,0.0, 0.0,0.0, 0.0, lastShiftTimeGauge = lastShiftTime,"lastShiftTime", "", -1.0,-1.0, -1.0,-1.0, -1.0,-1.0, 0,0 vssEdgeCounterGauge = vssEdgeCounter,"vssEdgeCounter", "", -1.0,-1.0, -1.0,-1.0, -1.0,-1.0, 0,0 issEdgeCounterGauge = issEdgeCounter,"issEdgeCounter", "", -1.0,-1.0, -1.0,-1.0, -1.0,-1.0, 0,0 -auxLinear1Gauge = auxLinear1,"Aux Linear 1", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 2,2 -auxLinear2Gauge = auxLinear2,"Aux Linear 2", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 2,2 +auxLinear1Gauge = auxLinear1,"Aux Linear #1", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 2,2 +auxLinear2Gauge = auxLinear2,"Aux Linear #2", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 2,2 dfcoActiveGauge = dfcoActive,"dfcoActive", "", -1.0,-1.0, -1.0,-1.0, -1.0,-1.0, 0,0 tpsAccelActiveGauge = tpsAccelActive,"tpsAccelActive", "", -1.0,-1.0, -1.0,-1.0, -1.0,-1.0, 0,0 unusedBit_207_2Gauge = unusedBit_207_2,"unusedBit_207_2", "", -1.0,-1.0, -1.0,-1.0, -1.0,-1.0, 0,0 @@ -374,7 +374,7 @@ mapFastGauge = mapFast,"mapFast", "", -1.0,-1.0, -1.0,-1.0, -1.0,-1.0, 0,0 luaGauges1Gauge = luaGauges1,"luaGauges 1", "value", 0.0,50000.0, 0.0,50000.0, 0.0,50000.0, 3,3 luaGauges2Gauge = luaGauges2,"luaGauges 2", "value", 0.0,50000.0, 0.0,50000.0, 0.0,50000.0, 3,3 rawMaf2Gauge = rawMaf2,"rawMaf2", "V", 0.0,5.0, 0.0,5.0, 0.0,5.0, 3,3 -mafMeasured2Gauge = mafMeasured2,"MAF sensor 2", "kg/h", 0.0,0.0, 0.0,0.0, 0.0,0.0, 1,1 +mafMeasured2Gauge = mafMeasured2,"MAF #2", "kg/h", 0.0,0.0, 0.0,0.0, 0.0,0.0, 1,1 unusedAtTheEnd1Gauge = unusedAtTheEnd1,"unusedAtTheEnd 1", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 unusedAtTheEnd2Gauge = unusedAtTheEnd2,"unusedAtTheEnd 2", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 unusedAtTheEnd3Gauge = unusedAtTheEnd3,"unusedAtTheEnd 3", "", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/console/binary/generated/sensors.java b/firmware/console/binary/generated/sensors.java index 9fa7bf46a4..d1870cb754 100644 --- a/firmware/console/binary/generated/sensors.java +++ b/firmware/console/binary/generated/sensors.java @@ -11,7 +11,7 @@ TPSValue("TPS", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 20, 0.01, 0.0, 0. throttlePedalPosition("Throttle pedal position", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 22, 0.01, 0.0, 0.0, "%"), tpsADC("tpsADC", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 24, 1.0, 0.0, 0.0, "ADC"), rawMaf("rawMaf", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 26, 0.001, 0.0, 5.0, "V"), -mafMeasured("MAF sensor", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 28, 0.1, 0.0, 0.0, "kg/h"), +mafMeasured("MAF", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 28, 0.1, 0.0, 0.0, "kg/h"), MAPValue("MAP", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 30, 0.03333333333333333, 0.0, 0.0, "kPa"), baroPressure("baroPressure", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 32, 0.03333333333333333, 0.0, 0.0, "kPa"), lambdaValue("Lambda", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 34, 1.0E-4, 0.0, 0.0, ""), @@ -166,8 +166,8 @@ tcRatio("Torque Converter Ratio", SensorCategory.SENSOR_INPUTS, FieldType.INT16, lastShiftTime("lastShiftTime", SensorCategory.SENSOR_INPUTS, FieldType.INT, 344, 1.0, -1.0, -1.0, ""), vssEdgeCounter("vssEdgeCounter", SensorCategory.SENSOR_INPUTS, FieldType.INT, 348, 1.0, -1.0, -1.0, ""), issEdgeCounter("issEdgeCounter", SensorCategory.SENSOR_INPUTS, FieldType.INT, 352, 1.0, -1.0, -1.0, ""), -auxLinear1("Aux Linear 1", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 356, 0.01, 0.0, 0.0, ""), -auxLinear2("Aux Linear 2", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 358, 0.01, 0.0, 0.0, ""), +auxLinear1("Aux Linear #1", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 356, 0.01, 0.0, 0.0, ""), +auxLinear2("Aux Linear #2", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 358, 0.01, 0.0, 0.0, ""), boostControllerOutput("Boost Output", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 364, 0.5, 0.0, 100.0, "%"), boostControllerOpenLoopPart("Boost Open Loop", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 365, 0.5, 0.0, 100.0, "%"), fallbackMap("fallbackMap", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 366, 0.1, 0.0, 1000.0, "kPa"), @@ -230,7 +230,7 @@ mapFast("mapFast", SensorCategory.SENSOR_INPUTS, FieldType.INT, 592, 1.0, -1.0, luaGauges1("luaGauges 1", SensorCategory.SENSOR_INPUTS, FieldType.INT, 596, 1.0, 0.0, 50000.0, "value"), luaGauges2("luaGauges 2", SensorCategory.SENSOR_INPUTS, FieldType.INT, 600, 1.0, 0.0, 50000.0, "value"), rawMaf2("rawMaf2", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 604, 0.001, 0.0, 5.0, "V"), -mafMeasured2("MAF sensor 2", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 606, 0.1, 0.0, 0.0, "kg/h"), +mafMeasured2("MAF #2", SensorCategory.SENSOR_INPUTS, FieldType.INT16, 606, 0.1, 0.0, 0.0, "kg/h"), unusedAtTheEnd1("unusedAtTheEnd 1", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 608, 1.0, 0.0, 0.0, ""), unusedAtTheEnd2("unusedAtTheEnd 2", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 609, 1.0, 0.0, 0.0, ""), unusedAtTheEnd3("unusedAtTheEnd 3", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 610, 1.0, 0.0, 0.0, ""), diff --git a/firmware/console/binary_log/log_fields_generated.h b/firmware/console/binary_log/log_fields_generated.h index a3ae7abb3f..1d0659020c 100644 --- a/firmware/console/binary_log/log_fields_generated.h +++ b/firmware/console/binary_log/log_fields_generated.h @@ -13,7 +13,7 @@ static constexpr LogField fields[] = { {engine->outputChannels.throttlePedalPosition, "Throttle pedal position", "%", 2}, {engine->outputChannels.tpsADC, "tpsADC", "ADC", 0}, {engine->outputChannels.rawMaf, "rawMaf", "V", 3}, - {engine->outputChannels.mafMeasured, "MAF sensor", "kg/h", 1}, + {engine->outputChannels.mafMeasured, "MAF", "kg/h", 1}, {engine->outputChannels.MAPValue, "MAP", "kPa", 1}, {engine->outputChannels.baroPressure, "baroPressure", "kPa", 1}, {engine->outputChannels.lambdaValue, "Lambda", "", 3}, @@ -168,8 +168,8 @@ static constexpr LogField fields[] = { {engine->outputChannels.lastShiftTime, "lastShiftTime", "", 0}, {engine->outputChannels.vssEdgeCounter, "vssEdgeCounter", "", 0}, {engine->outputChannels.issEdgeCounter, "issEdgeCounter", "", 0}, - {engine->outputChannels.auxLinear1, "Aux Linear 1", "", 2}, - {engine->outputChannels.auxLinear2, "Aux Linear 2", "", 2}, + {engine->outputChannels.auxLinear1, "Aux Linear #1", "", 2}, + {engine->outputChannels.auxLinear2, "Aux Linear #2", "", 2}, {engine->outputChannels.boostControllerOutput, "Boost Output", "%", 1}, {engine->outputChannels.boostControllerOpenLoopPart, "Boost Open Loop", "%", 1}, {engine->outputChannels.fallbackMap, "fallbackMap", "kPa", 1}, @@ -248,7 +248,7 @@ static constexpr LogField fields[] = { {engine->outputChannels.luaGauges[0], "luaGauges 1", "value", 3}, {engine->outputChannels.luaGauges[1], "luaGauges 2", "value", 3}, {engine->outputChannels.rawMaf2, "rawMaf2", "V", 3}, - {engine->outputChannels.mafMeasured2, "MAF sensor 2", "kg/h", 1}, + {engine->outputChannels.mafMeasured2, "MAF #2", "kg/h", 1}, {engine->engineState.lua.fuelAdd, "lua.fuelAdd", "", 0}, {engine->engineState.lua.fuelMult, "lua.fuelMult", "", 0}, {engine->engineState.sd.tCharge, "speed density", "", 0}, diff --git a/firmware/controllers/generated/rusefi_generated.h b/firmware/controllers/generated/rusefi_generated.h index 7b8dc4b418..26d8bfd5bd 100644 --- a/firmware/controllers/generated/rusefi_generated.h +++ b/firmware/controllers/generated/rusefi_generated.h @@ -391,11 +391,11 @@ #define GAUGE_NAME_AFR "Air/Fuel Ratio" #define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2" #define GAUGE_NAME_AIR_FLOW_ESTIMATE "MAF estimate" -#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF sensor" -#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF sensor 2" +#define GAUGE_NAME_AIR_FLOW_MEASURED "MAF" +#define GAUGE_NAME_AIR_FLOW_MEASURED_2 "MAF #2" #define GAUGE_NAME_AIR_MASS "air mass" -#define GAUGE_NAME_AUX_LINEAR_1 "Aux Linear 1" -#define GAUGE_NAME_AUX_LINEAR_2 "Aux Linear 2" +#define GAUGE_NAME_AUX_LINEAR_1 "Aux Linear #1" +#define GAUGE_NAME_AUX_LINEAR_2 "Aux Linear #2" #define GAUGE_NAME_AUX_TEMP1 "Aux temp 1" #define GAUGE_NAME_AUX_TEMP2 "Aux temp 2" #define GAUGE_NAME_BARO_PRESSURE "Barometric pressure" @@ -1026,7 +1026,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_41091 +#define SIGNATURE_HASH snap_8981 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1298,7 +1298,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.10.all.snap_41091" +#define TS_SIGNATURE "rusEFI 2022.11.10.all.snap_8981" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/controllers/generated/signature_48way.h b/firmware/controllers/generated/signature_48way.h index 683d853f97..51059182db 100644 --- a/firmware/controllers/generated/signature_48way.h +++ b/firmware/controllers/generated/signature_48way.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_43212 -#define TS_SIGNATURE "rusEFI 2022.11.10.48way.snap_43212" +#define SIGNATURE_HASH snap_11098 +#define TS_SIGNATURE "rusEFI 2022.11.10.48way.snap_11098" diff --git a/firmware/controllers/generated/signature_all.h b/firmware/controllers/generated/signature_all.h index 610f15d420..875f8668e3 100644 --- a/firmware/controllers/generated/signature_all.h +++ b/firmware/controllers/generated/signature_all.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_41091 -#define TS_SIGNATURE "rusEFI 2022.11.10.all.snap_41091" +#define SIGNATURE_HASH snap_8981 +#define TS_SIGNATURE "rusEFI 2022.11.10.all.snap_8981" diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index 44afdb24a9..0389f6071d 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_15855 -#define TS_SIGNATURE "rusEFI 2022.11.10.alphax-2chan.snap_15855" +#define SIGNATURE_HASH snap_48761 +#define TS_SIGNATURE "rusEFI 2022.11.10.alphax-2chan.snap_48761" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index 0da219e173..1ca72003d1 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_25356 -#define TS_SIGNATURE "rusEFI 2022.11.10.alphax-4chan.snap_25356" +#define SIGNATURE_HASH snap_57498 +#define TS_SIGNATURE "rusEFI 2022.11.10.alphax-4chan.snap_57498" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index edfe867af1..a2dc32b502 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_21924 -#define TS_SIGNATURE "rusEFI 2022.11.10.atlas.snap_21924" +#define SIGNATURE_HASH snap_54834 +#define TS_SIGNATURE "rusEFI 2022.11.10.atlas.snap_54834" diff --git a/firmware/controllers/generated/signature_core8.h b/firmware/controllers/generated/signature_core8.h index 50d7e312f8..2f77766820 100644 --- a/firmware/controllers/generated/signature_core8.h +++ b/firmware/controllers/generated/signature_core8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_61818 -#define TS_SIGNATURE "rusEFI 2022.11.10.core8.snap_61818" +#define SIGNATURE_HASH snap_29420 +#define TS_SIGNATURE "rusEFI 2022.11.10.core8.snap_29420" diff --git a/firmware/controllers/generated/signature_cypress.h b/firmware/controllers/generated/signature_cypress.h index be5e4311b6..a435e5c8c9 100644 --- a/firmware/controllers/generated/signature_cypress.h +++ b/firmware/controllers/generated/signature_cypress.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH snap_41091 -#define TS_SIGNATURE "rusEFI 2022.11.10.cypress.snap_41091" +#define SIGNATURE_HASH snap_8981 +#define TS_SIGNATURE "rusEFI 2022.11.10.cypress.snap_8981" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index 9a7b196b36..ac629a48b4 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_41091 -#define TS_SIGNATURE "rusEFI 2022.11.10.f407-discovery.snap_41091" +#define SIGNATURE_HASH snap_8981 +#define TS_SIGNATURE "rusEFI 2022.11.10.f407-discovery.snap_8981" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index a448eab6f1..7f26221fe1 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_41091 -#define TS_SIGNATURE "rusEFI 2022.11.10.f429-discovery.snap_41091" +#define SIGNATURE_HASH snap_8981 +#define TS_SIGNATURE "rusEFI 2022.11.10.f429-discovery.snap_8981" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index 5a4e39dbed..88a0f799cd 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_23623 -#define TS_SIGNATURE "rusEFI 2022.11.10.frankenso_na6.snap_23623" +#define SIGNATURE_HASH snap_57297 +#define TS_SIGNATURE "rusEFI 2022.11.10.frankenso_na6.snap_57297" diff --git a/firmware/controllers/generated/signature_harley81.h b/firmware/controllers/generated/signature_harley81.h index 1dc7ef131b..370face486 100644 --- a/firmware/controllers/generated/signature_harley81.h +++ b/firmware/controllers/generated/signature_harley81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_42412 -#define TS_SIGNATURE "rusEFI 2022.11.10.harley81.snap_42412" +#define SIGNATURE_HASH snap_9786 +#define TS_SIGNATURE "rusEFI 2022.11.10.harley81.snap_9786" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index 645f100f1a..5baa3d573d 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_50055 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen-gm-e67.snap_50055" +#define SIGNATURE_HASH snap_16401 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen-gm-e67.snap_16401" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index 9c59b0dd85..1a5d385ecb 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_37199 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen-nb1.snap_37199" +#define SIGNATURE_HASH snap_4825 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen-nb1.snap_4825" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index 4fa160ccdd..7f7e132068 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_44543 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen121nissan.snap_44543" +#define SIGNATURE_HASH snap_11881 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen121nissan.snap_11881" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index 1c43697ac2..271f5fcee7 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_25593 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen121vag.snap_25593" +#define SIGNATURE_HASH snap_57455 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen121vag.snap_57455" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index f25563c774..a75580a795 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_56760 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen128.snap_56760" +#define SIGNATURE_HASH snap_24110 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen128.snap_24110" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index 460e13d30b..d32e8c39be 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_39520 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen154hyundai.snap_39520" +#define SIGNATURE_HASH snap_6646 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen154hyundai.snap_6646" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index 044c3d76f4..fb8c96a00b 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_44552 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen72.snap_44552" +#define SIGNATURE_HASH snap_11678 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen72.snap_11678" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index 99c16ea47d..32564f6042 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_30857 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen81.snap_30857" +#define SIGNATURE_HASH snap_64287 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen81.snap_64287" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index a3e06f899a..b09cc0b390 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_45903 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellen88bmw.snap_45903" +#define SIGNATURE_HASH snap_12505 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellen88bmw.snap_12505" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index bf40408108..3ddb68ed91 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_4532 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellenNA6.snap_4532" +#define SIGNATURE_HASH snap_37410 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellenNA6.snap_37410" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index f5e9739f32..493e4e8159 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_4459 -#define TS_SIGNATURE "rusEFI 2022.11.10.hellenNA8_96.snap_4459" +#define SIGNATURE_HASH snap_37629 +#define TS_SIGNATURE "rusEFI 2022.11.10.hellenNA8_96.snap_37629" diff --git a/firmware/controllers/generated/signature_kin.h b/firmware/controllers/generated/signature_kin.h index d0dcf5f91b..15fcb1de23 100644 --- a/firmware/controllers/generated/signature_kin.h +++ b/firmware/controllers/generated/signature_kin.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH snap_591 -#define TS_SIGNATURE "rusEFI 2022.11.10.kin.snap_591" +#define SIGNATURE_HASH snap_33241 +#define TS_SIGNATURE "rusEFI 2022.11.10.kin.snap_33241" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index 11f0829350..b3baf62d29 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_51075 -#define TS_SIGNATURE "rusEFI 2022.11.10.mre_f4.snap_51075" +#define SIGNATURE_HASH snap_17429 +#define TS_SIGNATURE "rusEFI 2022.11.10.mre_f4.snap_17429" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index 83b7bb7423..4f76294263 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_51075 -#define TS_SIGNATURE "rusEFI 2022.11.10.mre_f7.snap_51075" +#define SIGNATURE_HASH snap_17429 +#define TS_SIGNATURE "rusEFI 2022.11.10.mre_f7.snap_17429" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index 60be80fe0a..ae26cc0b98 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_31077 -#define TS_SIGNATURE "rusEFI 2022.11.10.prometheus_405.snap_31077" +#define SIGNATURE_HASH snap_64243 +#define TS_SIGNATURE "rusEFI 2022.11.10.prometheus_405.snap_64243" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index be93e9effc..4f8b8e066b 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_31077 -#define TS_SIGNATURE "rusEFI 2022.11.10.prometheus_469.snap_31077" +#define SIGNATURE_HASH snap_64243 +#define TS_SIGNATURE "rusEFI 2022.11.10.prometheus_469.snap_64243" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index a98f3407a2..cbe2cc8694 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_26613 -#define TS_SIGNATURE "rusEFI 2022.11.10.proteus_f4.snap_26613" +#define SIGNATURE_HASH snap_58467 +#define TS_SIGNATURE "rusEFI 2022.11.10.proteus_f4.snap_58467" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index 79f6a16ac8..99342b6526 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_26613 -#define TS_SIGNATURE "rusEFI 2022.11.10.proteus_f7.snap_26613" +#define SIGNATURE_HASH snap_58467 +#define TS_SIGNATURE "rusEFI 2022.11.10.proteus_f7.snap_58467" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index cca836873b..ec035f76ee 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_26613 -#define TS_SIGNATURE "rusEFI 2022.11.10.proteus_h7.snap_26613" +#define SIGNATURE_HASH snap_58467 +#define TS_SIGNATURE "rusEFI 2022.11.10.proteus_h7.snap_58467" diff --git a/firmware/controllers/generated/signature_subaru_eg33_f7.h b/firmware/controllers/generated/signature_subaru_eg33_f7.h index 933c374bcc..a263cb42ee 100644 --- a/firmware/controllers/generated/signature_subaru_eg33_f7.h +++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_31065 -#define TS_SIGNATURE "rusEFI 2022.11.10.subaru_eg33_f7.snap_31065" +#define SIGNATURE_HASH snap_64207 +#define TS_SIGNATURE "rusEFI 2022.11.10.subaru_eg33_f7.snap_64207" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index 24e624fabb..793d66c4c5 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_28375 -#define TS_SIGNATURE "rusEFI 2022.11.10.tdg-pdm8.snap_28375" +#define SIGNATURE_HASH snap_60737 +#define TS_SIGNATURE "rusEFI 2022.11.10.tdg-pdm8.snap_60737" diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index 95cd71e41e..087dbcf104 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.all.snap_41091" + signature = "rusEFI 2022.11.10.all.snap_8981" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.all.snap_41091" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.all.snap_8981" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:23 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:45 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_48way.ini b/firmware/tunerstudio/generated/rusefi_48way.ini index 68e54a9134..2420e2fe18 100644 --- a/firmware/tunerstudio/generated/rusefi_48way.ini +++ b/firmware/tunerstudio/generated/rusefi_48way.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.48way.snap_43212" + signature = "rusEFI 2022.11.10.48way.snap_11098" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.48way.snap_43212" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.48way.snap_11098" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:02 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:23 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",41="Boost Controller Output (C7)",68= acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index b40223ad73..e2f4fede71 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.alphax-2chan.snap_15855" + signature = "rusEFI 2022.11.10.alphax-2chan.snap_48761" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.alphax-2chan.snap_15855" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.alphax-2chan.snap_48761" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:30 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:15:47 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",40="A3 - Fuel Pump",41="A4 - Tachomet acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index ae905f9d53..704be2a3ec 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.alphax-4chan.snap_25356" + signature = "rusEFI 2022.11.10.alphax-4chan.snap_57498" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.alphax-4chan.snap_25356" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.alphax-4chan.snap_57498" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:31 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:15:50 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",10="A3 - Fuel Pump",104="A4 - Tachome acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index 6bd6a1f5ee..0441e0d4f5 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.atlas.snap_21924" + signature = "rusEFI 2022.11.10.atlas.snap_54834" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.atlas.snap_21924" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.atlas.snap_54834" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:19 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:41 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_core8.ini b/firmware/tunerstudio/generated/rusefi_core8.ini index 8ff2072e92..b6575d70bd 100644 --- a/firmware/tunerstudio/generated/rusefi_core8.ini +++ b/firmware/tunerstudio/generated/rusefi_core8.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.core8.snap_61818" + signature = "rusEFI 2022.11.10.core8.snap_29420" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.core8.snap_61818" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.core8.snap_29420" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:00 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:21 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",26="DBW Control (B8)",27="DBW Directi acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_cypress.ini b/firmware/tunerstudio/generated/rusefi_cypress.ini index a50b5a758b..c31d0b2213 100644 --- a/firmware/tunerstudio/generated/rusefi_cypress.ini +++ b/firmware/tunerstudio/generated/rusefi_cypress.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.cypress.snap_41091" + signature = "rusEFI 2022.11.10.cypress.snap_8981" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.cypress.snap_41091" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.cypress.snap_8981" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 10 01:44:26 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 10 20:15:43 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index adddfd2296..a28aeb025a 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.f407-discovery.snap_41091" + signature = "rusEFI 2022.11.10.f407-discovery.snap_8981" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.f407-discovery.snap_41091" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.f407-discovery.snap_8981" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:16 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:37 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index a33e359203..e2d9389240 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.f429-discovery.snap_41091" + signature = "rusEFI 2022.11.10.f429-discovery.snap_8981" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.f429-discovery.snap_41091" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.f429-discovery.snap_8981" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:18 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:39 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index d39c6971f1..734530172d 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.frankenso_na6.snap_23623" + signature = "rusEFI 2022.11.10.frankenso_na6.snap_57297" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.frankenso_na6.snap_23623" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.frankenso_na6.snap_57297" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:04 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:25 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",43="Coil 1F",80="Coil 1G",41="Coil 1H acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_harley81.ini b/firmware/tunerstudio/generated/rusefi_harley81.ini index 61e74cc68f..9943a897d6 100644 --- a/firmware/tunerstudio/generated/rusefi_harley81.ini +++ b/firmware/tunerstudio/generated/rusefi_harley81.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.harley81.snap_42412" + signature = "rusEFI 2022.11.10.harley81.snap_9786" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.harley81.snap_42412" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.harley81.snap_9786" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:33 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:15:52 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",65="1 Right Oil Cooling",47="24 Front acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index 78ab8ac4e1..d7b71564ed 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen-gm-e67.snap_50055" + signature = "rusEFI 2022.11.10.hellen-gm-e67.snap_16401" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen-gm-e67.snap_50055" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen-gm-e67.snap_16401" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:51 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:11 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",100="C1-12 Check Engine",52="C1-13 - acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index 19d2d0072c..cfbf84dbba 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen-nb1.snap_37199" + signature = "rusEFI 2022.11.10.hellen-nb1.snap_4825" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen-nb1.snap_37199" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen-nb1.snap_4825" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:49 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:09 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",102="1E - Check Engine Light",11="1I acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index 3aef30beaa..683eed35d7 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen121nissan.snap_44543" + signature = "rusEFI 2022.11.10.hellen121nissan.snap_11881" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen121nissan.snap_44543" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen121nissan.snap_11881" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 02:45:46 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:15:58 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",95="10 - VTC Left",103="104 ETB Relay acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index 9affc10cf4..61286b5acc 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen121vag.snap_25593" + signature = "rusEFI 2022.11.10.hellen121vag.snap_57455" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen121vag.snap_25593" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen121vag.snap_57455" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:37 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:15:56 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",35="101 - MAP2",138="102 - IGN_1",68= acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini index a81127ddb5..48487d453d 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen128.snap_56760" + signature = "rusEFI 2022.11.10.hellen128.snap_24110" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen128.snap_56760" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen128.snap_24110" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:35 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:15:54 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",62="A6 - Fan Control",128="C21 - Evap acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index be6f66c24e..6b57e382bf 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen154hyundai.snap_39520" + signature = "rusEFI 2022.11.10.hellen154hyundai.snap_6646" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen154hyundai.snap_39520" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen154hyundai.snap_6646" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:41 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:00 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",53="Aux P66",11="Aux P67",103="Aux P6 acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index a5b21fc3d6..3368720b22 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen72.snap_44552" + signature = "rusEFI 2022.11.10.hellen72.snap_11678" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen72.snap_44552" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen72.snap_11678" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:45 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:04 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",105="2A - INJ_1",62="2B - ECF (PWM8)" acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index ad82c3a3db..c9dd43bad7 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen81.snap_30857" + signature = "rusEFI 2022.11.10.hellen81.snap_64287" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen81.snap_30857" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen81.snap_64287" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:47 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:07 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",71="1 - IGN_2",65="10 - OUT_FUEL",127 acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index e52ef0a83d..e0795e2f7f 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellen88bmw.snap_45903" + signature = "rusEFI 2022.11.10.hellen88bmw.snap_12505" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellen88bmw.snap_45903" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellen88bmw.snap_12505" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:43 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:02 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",112="1 - OUT_PUMP",62="2 - IdleC",69= acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index ad7c9238c2..a3f4fbff48 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellenNA6.snap_4532" + signature = "rusEFI 2022.11.10.hellenNA6.snap_37410" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellenNA6.snap_4532" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellenNA6.snap_37410" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:53 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:13 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",107="1E - Check Engine Light",138="1G acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index 0b81882040..c9dab569da 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.hellenNA8_96.snap_4459" + signature = "rusEFI 2022.11.10.hellenNA8_96.snap_37629" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.hellenNA8_96.snap_4459" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.hellenNA8_96.snap_37629" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:55 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:15 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",62="1A - ECF",11="1B - AC Fan Relay", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_kin.ini b/firmware/tunerstudio/generated/rusefi_kin.ini index 6308b2a7c1..321096577b 100644 --- a/firmware/tunerstudio/generated/rusefi_kin.ini +++ b/firmware/tunerstudio/generated/rusefi_kin.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.kin.snap_591" + signature = "rusEFI 2022.11.10.kin.snap_33241" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.kin.snap_591" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.kin.snap_33241" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 10 01:44:24 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 10 20:15:42 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index 235b85e590..39d70a5046 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.mre_f4.snap_51075" + signature = "rusEFI 2022.11.10.mre_f4.snap_17429" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.mre_f4.snap_51075" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.mre_f4.snap_17429" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:59 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:19 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",53="10 - Ignition 2",52="11 - Ignitio acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index 96daedb227..49c68dd280 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.mre_f7.snap_51075" + signature = "rusEFI 2022.11.10.mre_f7.snap_17429" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.mre_f7.snap_51075" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.mre_f7.snap_17429" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:57 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:17 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",53="10 - Ignition 2",52="11 - Ignitio acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index fef33375c8..e5065b82e5 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.prometheus_405.snap_31077" + signature = "rusEFI 2022.11.10.prometheus_405.snap_64243" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.prometheus_405.snap_31077" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.prometheus_405.snap_64243" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:08 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:29 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index e93c797cc0..8cedde77b1 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.prometheus_469.snap_31077" + signature = "rusEFI 2022.11.10.prometheus_469.snap_64243" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.prometheus_469.snap_31077" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.prometheus_469.snap_64243" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:06 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:27 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index 324a7aeee2..f1fbdaab4e 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.proteus_f4.snap_26613" + signature = "rusEFI 2022.11.10.proteus_f4.snap_58467" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.proteus_f4.snap_26613" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.proteus_f4.snap_58467" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:12 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:33 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",11="Highside 1",10="Highside 2",65="H acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index fc737df7d4..eb95008463 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.proteus_f7.snap_26613" + signature = "rusEFI 2022.11.10.proteus_f7.snap_58467" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.proteus_f7.snap_26613" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.proteus_f7.snap_58467" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:10 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:31 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",11="Highside 1",10="Highside 2",65="H acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index 7220f87825..ae74cfb7b9 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.proteus_h7.snap_26613" + signature = "rusEFI 2022.11.10.proteus_h7.snap_58467" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.proteus_h7.snap_26613" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.proteus_h7.snap_58467" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:14 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:35 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",11="Highside 1",10="Highside 2",65="H acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index f09ffdfc01..29477c3cb0 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.subaru_eg33_f7.snap_31065" + signature = "rusEFI 2022.11.10.subaru_eg33_f7.snap_64207" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.subaru_eg33_f7.snap_31065" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.subaru_eg33_f7.snap_64207" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Thu Nov 10 01:44:28 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Thu Nov 10 20:15:45 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",186="A01 - Injector 5",194="A12 - Inj acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index c8684a8af2..9b4c9aa83c 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.10.tdg-pdm8.snap_28375" + signature = "rusEFI 2022.11.10.tdg-pdm8.snap_60737" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.10.tdg-pdm8.snap_28375" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.10.tdg-pdm8.snap_60737" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:21 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:43 UTC 2022 pageSize = 22800 page = 1 @@ -388,7 +388,7 @@ acFanPin = bits, U16, 790, [0:7], 0="NONE",257="Out 1",258="Out 2",259="Out 3",2 acFanPinMode = bits, U08, 792, [0:1], "default", "default inverted", "open collector", "open collector inverted" l9779spiDevice = bits, U08, 793, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" dwellVoltageCorrVoltBins = array, U08, 794, [8], "volts", 0.1, 0, 0, 20, 1 -imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 2", "type 2" +imuType = bits, U08, 802, [0:4], "None", "VAG", "MM5.10", "type 3", "type 4" dwellVoltageCorrValues = array, U08, 803, [8], "multiplier", 0.02, 0, 0, 5, 2 vehicleWeight = scalar, U16, 812, "kg", 1, 0, 0, 10000, 0 idlePidRpmUpperLimit = scalar, S16, 814, "RPM", 1, 0, 0, 500, 0 @@ -3910,7 +3910,7 @@ gaugeCategory = Sensors - Basic lambda2Gauge = lambdaValue2, "Lambda 2", "", 0.65, 1.2, 0.7, 0.75, 1.1, 1.15, 3, 2 VBattGauge = VBatt, "Battery", "V", 8, 21, 9, 10, 17, 19, 1, 1 MAPGauge = MAPValue, "MAP", "kPa", 0, 300, 10, 10, 200, 200, 0, 0 - massAirFlowValueGa = mafMeasured, "MAF sensor", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 + massAirFlowValueGa = mafMeasured, "MAF", "kg/h", 0, 50, -999, -999, 999, 999, 1, 1 gaugeCategory = Sensors - Extra 1 VSSGauge = vehicleSpeedKph, "Vehicle Speed", "kmh", 0, 200, 0, 1, 3, 4, 1, 1 @@ -3927,8 +3927,8 @@ gaugeCategory = Sensors - Extra 1 AuxT2Gauge = auxTemp2, "Aux temp 2", "C", -40, 140, -15, 1, 95, 110, 1, 1 lowFuelPressureGauge = lowFuelPressure, "Fuel pressure (low)", "kPa", 0, 700, 0, 0, 700, 700, 1, 0 flexPercentGauge = flexPercent, "Flex Ethanol %", "%", 0, 100, 0, 0, 100, 100, 0, 0 - AuxL1Gauge = auxLinear1, "Aux Linear 1", "", -100, 100, -100, -100, 100, 100, 2, 2 - AuxL2Gauge = auxLinear2, "Aux Linear 2", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL1Gauge = auxLinear1, "Aux Linear #1", "", -100, 100, -100, -100, 100, 100, 2, 2 + AuxL2Gauge = auxLinear2, "Aux Linear #2", "", -100, 100, -100, -100, 100, 100, 2, 2 gaugeCategory = VVT vvtPositionB1IGauge = vvtPositionB1I, "VVT: bank 1 intake", "deg", -60, 60, -60, -60, 60, 60, 1, 1 @@ -4201,7 +4201,7 @@ entry = TPSValue, "TPS", float, "%.3f" entry = throttlePedalPosition, "Throttle pedal position", float, "%.3f" entry = tpsADC, "tpsADC", int, "%d" entry = rawMaf, "rawMaf", float, "%.3f" -entry = mafMeasured, "MAF sensor", float, "%.3f" +entry = mafMeasured, "MAF", float, "%.3f" entry = MAPValue, "MAP", float, "%.3f" entry = baroPressure, "baroPressure", float, "%.3f" entry = lambdaValue, "Lambda", float, "%.3f" @@ -4358,8 +4358,8 @@ entry = tcRatio, "Torque Converter Ratio", float, "%.3f" entry = lastShiftTime, "lastShiftTime", float, "%.3f" entry = vssEdgeCounter, "vssEdgeCounter", int, "%d" entry = issEdgeCounter, "issEdgeCounter", int, "%d" -entry = auxLinear1, "Aux Linear 1", float, "%.3f" -entry = auxLinear2, "Aux Linear 2", float, "%.3f" +entry = auxLinear1, "Aux Linear #1", float, "%.3f" +entry = auxLinear2, "Aux Linear #2", float, "%.3f" entry = dfcoActive, "dfcoActive", int, "%d" entry = tpsAccelActive, "tpsAccelActive", int, "%d" entry = boostControllerOutput, "Boost Output", float, "%.3f" @@ -4464,7 +4464,7 @@ entry = mapFast, "mapFast", float, "%.3f" entry = luaGauges1, "luaGauges 1", float, "%.3f" entry = luaGauges2, "luaGauges 2", float, "%.3f" entry = rawMaf2, "rawMaf2", float, "%.3f" -entry = mafMeasured2, "MAF sensor 2", float, "%.3f" +entry = mafMeasured2, "MAF #2", float, "%.3f" entry = m_knockRetard, "Knock Degrees retarded", float, "%.3f" entry = m_knockThreshold, "m_knockThreshold", float, "%.3f" entry = m_knockCount, "m_knockCount", int, "%d" diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/AcControl.java b/java_console/models/src/main/java/com/rusefi/config/generated/AcControl.java index 6fe8e00999..407b09eca7 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/AcControl.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/AcControl.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/ac_control.txt Tue Nov 01 20:59:53 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/ac_control.txt Thu Nov 10 20:15:40 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -114,11 +114,11 @@ public class AcControl { public static final String GAUGE_NAME_AFR = "Air/Fuel Ratio"; public static final String GAUGE_NAME_AFR2 = "Air/Fuel Ratio 2"; public static final String GAUGE_NAME_AIR_FLOW_ESTIMATE = "MAF estimate"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF sensor"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF sensor 2"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF #2"; public static final String GAUGE_NAME_AIR_MASS = "air mass"; - public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear 1"; - public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear 2"; + public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear #1"; + public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear #2"; public static final String GAUGE_NAME_AUX_TEMP1 = "Aux temp 1"; public static final String GAUGE_NAME_AUX_TEMP2 = "Aux temp 2"; public static final String GAUGE_NAME_BARO_PRESSURE = "Barometric pressure"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/BoostControl.java b/java_console/models/src/main/java/com/rusefi/config/generated/BoostControl.java index fdf05b037b..128eb68976 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/BoostControl.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/BoostControl.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/boost_control.txt Tue Nov 01 20:59:53 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/boost_control.txt Thu Nov 10 20:15:40 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -114,11 +114,11 @@ public class BoostControl { public static final String GAUGE_NAME_AFR = "Air/Fuel Ratio"; public static final String GAUGE_NAME_AFR2 = "Air/Fuel Ratio 2"; public static final String GAUGE_NAME_AIR_FLOW_ESTIMATE = "MAF estimate"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF sensor"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF sensor 2"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF #2"; public static final String GAUGE_NAME_AIR_MASS = "air mass"; - public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear 1"; - public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear 2"; + public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear #1"; + public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear #2"; public static final String GAUGE_NAME_AUX_TEMP1 = "Aux temp 1"; public static final String GAUGE_NAME_AUX_TEMP2 = "Aux temp 2"; public static final String GAUGE_NAME_BARO_PRESSURE = "Barometric pressure"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/EngineState.java b/java_console/models/src/main/java/com/rusefi/config/generated/EngineState.java index b5cdbdc37a..d263bb07fa 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/EngineState.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/EngineState.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Sun Nov 06 00:27:04 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/engine_state.txt Thu Nov 10 20:15:40 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -114,11 +114,11 @@ public class EngineState { public static final String GAUGE_NAME_AFR = "Air/Fuel Ratio"; public static final String GAUGE_NAME_AFR2 = "Air/Fuel Ratio 2"; public static final String GAUGE_NAME_AIR_FLOW_ESTIMATE = "MAF estimate"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF sensor"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF sensor 2"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF #2"; public static final String GAUGE_NAME_AIR_MASS = "air mass"; - public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear 1"; - public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear 2"; + public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear #1"; + public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear #2"; public static final String GAUGE_NAME_AUX_TEMP1 = "Aux temp 1"; public static final String GAUGE_NAME_AUX_TEMP2 = "Aux temp 2"; public static final String GAUGE_NAME_BARO_PRESSURE = "Barometric pressure"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index 1eb896122e..8f242a5631 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 01:45:26 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 10 20:16:48 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -374,11 +374,11 @@ public class Fields { public static final String GAUGE_NAME_AFR = "Air/Fuel Ratio"; public static final String GAUGE_NAME_AFR2 = "Air/Fuel Ratio 2"; public static final String GAUGE_NAME_AIR_FLOW_ESTIMATE = "MAF estimate"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF sensor"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF sensor 2"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF #2"; public static final String GAUGE_NAME_AIR_MASS = "air mass"; - public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear 1"; - public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear 2"; + public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear #1"; + public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear #2"; public static final String GAUGE_NAME_AUX_TEMP1 = "Aux temp 1"; public static final String GAUGE_NAME_AUX_TEMP2 = "Aux temp 2"; public static final String GAUGE_NAME_BARO_PRESSURE = "Barometric pressure"; @@ -1180,7 +1180,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI 2022.11.10.all.snap_41091"; + public static final String TS_SIGNATURE = "rusEFI 2022.11.10.all.snap_8981"; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't'; public static final int TS_TOTAL_OUTPUT_SIZE = 1256; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/FuelComputer.java b/java_console/models/src/main/java/com/rusefi/config/generated/FuelComputer.java index b46ca02dbf..fe27af1820 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/FuelComputer.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/FuelComputer.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Sun Nov 06 00:27:04 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/algo/fuel/fuel_computer.txt Thu Nov 10 20:15:40 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -114,11 +114,11 @@ public class FuelComputer { public static final String GAUGE_NAME_AFR = "Air/Fuel Ratio"; public static final String GAUGE_NAME_AFR2 = "Air/Fuel Ratio 2"; public static final String GAUGE_NAME_AIR_FLOW_ESTIMATE = "MAF estimate"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF sensor"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF sensor 2"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF #2"; public static final String GAUGE_NAME_AIR_MASS = "air mass"; - public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear 1"; - public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear 2"; + public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear #1"; + public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear #2"; public static final String GAUGE_NAME_AUX_TEMP1 = "Aux temp 1"; public static final String GAUGE_NAME_AUX_TEMP2 = "Aux temp 2"; public static final String GAUGE_NAME_BARO_PRESSURE = "Barometric pressure"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/TriggerState.java b/java_console/models/src/main/java/com/rusefi/config/generated/TriggerState.java index 3d369729ec..08342b22ed 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/TriggerState.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/TriggerState.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state.txt Tue Nov 01 20:59:53 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state.txt Thu Nov 10 20:15:40 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -114,11 +114,11 @@ public class TriggerState { public static final String GAUGE_NAME_AFR = "Air/Fuel Ratio"; public static final String GAUGE_NAME_AFR2 = "Air/Fuel Ratio 2"; public static final String GAUGE_NAME_AIR_FLOW_ESTIMATE = "MAF estimate"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF sensor"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF sensor 2"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF #2"; public static final String GAUGE_NAME_AIR_MASS = "air mass"; - public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear 1"; - public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear 2"; + public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear #1"; + public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear #2"; public static final String GAUGE_NAME_AUX_TEMP1 = "Aux temp 1"; public static final String GAUGE_NAME_AUX_TEMP2 = "Aux temp 2"; public static final String GAUGE_NAME_BARO_PRESSURE = "Barometric pressure"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/TriggerStatePrimary.java b/java_console/models/src/main/java/com/rusefi/config/generated/TriggerStatePrimary.java index 22b4439d19..29d9c6d7d4 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/TriggerStatePrimary.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/TriggerStatePrimary.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state_primary.txt Tue Nov 01 20:59:53 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/trigger/trigger_state_primary.txt Thu Nov 10 20:15:40 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -114,11 +114,11 @@ public class TriggerStatePrimary { public static final String GAUGE_NAME_AFR = "Air/Fuel Ratio"; public static final String GAUGE_NAME_AFR2 = "Air/Fuel Ratio 2"; public static final String GAUGE_NAME_AIR_FLOW_ESTIMATE = "MAF estimate"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF sensor"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF sensor 2"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF #2"; public static final String GAUGE_NAME_AIR_MASS = "air mass"; - public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear 1"; - public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear 2"; + public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear #1"; + public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear #2"; public static final String GAUGE_NAME_AUX_TEMP1 = "Aux temp 1"; public static final String GAUGE_NAME_AUX_TEMP2 = "Aux temp 2"; public static final String GAUGE_NAME_BARO_PRESSURE = "Barometric pressure"; diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/TsOutputs.java b/java_console/models/src/main/java/com/rusefi/config/generated/TsOutputs.java index 9196858e81..f3a629cb1e 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/TsOutputs.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/TsOutputs.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) console/binary/output_channels.txt Sun Nov 06 00:27:04 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) console/binary/output_channels.txt Thu Nov 10 20:15:39 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -114,11 +114,11 @@ public class TsOutputs { public static final String GAUGE_NAME_AFR = "Air/Fuel Ratio"; public static final String GAUGE_NAME_AFR2 = "Air/Fuel Ratio 2"; public static final String GAUGE_NAME_AIR_FLOW_ESTIMATE = "MAF estimate"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF sensor"; - public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF sensor 2"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED = "MAF"; + public static final String GAUGE_NAME_AIR_FLOW_MEASURED_2 = "MAF #2"; public static final String GAUGE_NAME_AIR_MASS = "air mass"; - public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear 1"; - public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear 2"; + public static final String GAUGE_NAME_AUX_LINEAR_1 = "Aux Linear #1"; + public static final String GAUGE_NAME_AUX_LINEAR_2 = "Aux Linear #2"; public static final String GAUGE_NAME_AUX_TEMP1 = "Aux temp 1"; public static final String GAUGE_NAME_AUX_TEMP2 = "Aux temp 2"; public static final String GAUGE_NAME_BARO_PRESSURE = "Barometric pressure";