rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

only: 8888TestConfiguration is read

This commit is contained in:
Andrey 2023-09-14 08:53:55 -04:00
parent b81fb40203
commit acdf9296df
4 changed files with 2 additions and 90 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
firmware/config/engines/custom_engine.cpp
View File

@ -355,91 +355,6 @@ void setL9779TestConfiguration() {
engineConfiguration->l9779_cs = Gpio::D5;
}
// TLE8888_BENCH_ENGINE
// todo: remove this? this was used to play with "secret" red boards prior to MRE reality
// set engine_type 59
void setTle8888TestConfiguration() {
engineConfiguration->cylindersCount = 8;
engineConfiguration->firingOrder = FO_1_8_7_2_6_5_4_3;
engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS;
engineConfiguration->crankingInjectionMode = IM_SEQUENTIAL;
#if defined(STM32_HAS_GPIOG) && STM32_HAS_GPIOG
engineConfiguration->ignitionPins[0] = Gpio::G3;
engineConfiguration->ignitionPins[1] = Gpio::G4;
engineConfiguration->ignitionPins[2] = Gpio::G5;
engineConfiguration->ignitionPins[3] = Gpio::G6;
engineConfiguration->ignitionPins[4] = Gpio::G7;
engineConfiguration->ignitionPins[5] = Gpio::G8;
#endif /* STM32_HAS_GPIOG */
engineConfiguration->ignitionPins[6] = Gpio::C6;
engineConfiguration->ignitionPins[7] = Gpio::C7;
#if (BOARD_TLE8888_COUNT > 0)
engineConfiguration->tle8888spiDevice = SPI_DEVICE_1;
engineConfiguration->tle8888_cs = Gpio::D5;
// PB3 is nicely both SWO and SPI1 SCK so logic analyzer could be used on SWO header
engineConfiguration->spi1mosiPin = Gpio::B5;
engineConfiguration->spi1misoPin = Gpio::B4;
engineConfiguration->spi1sckPin = Gpio::B3; // please note that this pin is also SWO/SWD - Single Wire debug Output
engineConfiguration->is_enabled_spi_1 = true;
engineConfiguration->debugMode = DBG_TLE8888;
engineConfiguration->fuelPumpPin = Gpio::TLE8888_PIN_20;
#endif /* BOARD_TLE8888_COUNT */
engineConfiguration->throttlePedalPositionAdcChannel = EFI_ADC_9; // PB1 // just any non-empty value for now
// ETB #1 top one - closer to 121 connector
// DIS PF12
// EN PF13
// IN1 PF15
// IN2 PF14
// SF PF11
#if defined(STM32_HAS_GPIOF) && STM32_HAS_GPIOF
engineConfiguration->etbIo[0].directionPin1 = Gpio::F15;
engineConfiguration->etbIo[0].directionPin2 = Gpio::F14;
engineConfiguration->etbIo[0].disablePin = Gpio::F12;
#endif /* STM32_HAS_GPIOF */
engineConfiguration->etb_use_two_wires = true;
engineConfiguration->isHip9011Enabled = false;
// ETB #2
// DIS PE5
// EN PE6
// IN1 PE2
// IN2 PE4
// SF PE3
engineConfiguration->etbIo[0].directionPin1 = Gpio::E2;
engineConfiguration->etbIo[0].directionPin2 = Gpio::E4;
engineConfiguration->etbIo[0].disablePin = Gpio::E5;
engineConfiguration->tps1_1AdcChannel = EFI_ADC_3; // PA3
engineConfiguration->throttlePedalPositionAdcChannel = EFI_ADC_7; // PA7
// engineConfiguration->etb.pFactor = 1.07;
// engineConfiguration->etb.iFactor = 0.18;
// engineConfiguration->etb.dFactor = 0.24;
// engineConfiguration->etb.offset = 80;
engineConfiguration->etb.pFactor = 22;
engineConfiguration->etb.iFactor = 0;
engineConfiguration->etb.dFactor = 0;
engineConfiguration->etb.offset = 0;
engineConfiguration->etb_iTermMin = -300;
engineConfiguration->etb_iTermMax = 300;
// VAG test ETB, no divider on red board - direct 3v TPS sensor
// set tps_min 332
engineConfiguration->tpsMin = 332;
// by the way this ETB has default position of ADC=74 which is about 4%
// set tps_max 540
engineConfiguration->tpsMax = 799;
}
#if HW_PROTEUS
/*
* set engine_type 96

1
firmware/config/engines/custom_engine.h
View File

@ -13,7 +13,6 @@ void runSchedulingPrecisionTestIfNeeded(void);
void setDiscoveryPdm();
void setFrankensoBoardTestConfiguration();
void setEtbTestConfiguration();
void setTle8888TestConfiguration();
void setL9779TestConfiguration();
void setEepromTestConfiguration();

4
firmware/controllers/algo/engine_configuration.cpp
View File

@ -942,9 +942,7 @@ void resetConfigurationExt(configuration_callback_t boardCallback, engine_type_e
setEepromTestConfiguration();
#endif
break;
case engine_type_e::TLE8888_BENCH_ENGINE:
setTle8888TestConfiguration();
break;
case engine_type_e::UNUSED_59:
case engine_type_e::FRANKENSO_MAZDA_MIATA_NA8:
setFrankensoMazdaMiataNA8Configuration();
break;

2
firmware/controllers/algo/engine_types.h
View File

@ -152,7 +152,7 @@ enum class engine_type_e : uint16_t {
ETB_BENCH_ENGINE = 58,
TLE8888_BENCH_ENGINE = 59,
UNUSED_59 = 59,
L9779_BENCH_ENGINE = 60,