rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

[DRAFT] Air by rpm taper (#4486) 

* add rpm to getOpenLoop() and getRunningOpenLoop()

* implement airByRpmTaper

* unit-test for airByRpmTaper
This commit is contained in:
Andreika 2022-08-26 04:23:23 +03:00 committed by GitHub
parent 5547394d36
commit c24712bed7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 70 additions and 39 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
firmware/controllers/actuators/idle_thread.cpp
View File

@ -89,7 +89,7 @@ float IdleController::getCrankingOpenLoop(float clt) const {
return engineConfiguration->crankingIACposition * mult;
}
percent_t IdleController::getRunningOpenLoop(float clt, SensorResult tps) {
percent_t IdleController::getRunningOpenLoop(float rpm, float clt, SensorResult tps) {
float running =
engineConfiguration->manIdlePosition // Base idle position (slider)
* interpolate2d(clt, config->cltIdleCorrBins, config->cltIdleCorr);
@ -110,10 +110,18 @@ percent_t IdleController::getRunningOpenLoop(float clt, SensorResult tps) {
running += iacByTpsTaper;
float airTaperRpmUpperLimit = engineConfiguration->idlePidRpmUpperLimit + engineConfiguration->airTaperRpmRange;
iacByRpmTaper = interpolateClamped(
engineConfiguration->idlePidRpmUpperLimit, 0,
airTaperRpmUpperLimit, engineConfiguration->airByRpmTaper,
rpm);
running += iacByRpmTaper;
return clampF(0, running, 100);
}
percent_t IdleController::getOpenLoop(Phase phase, float clt, SensorResult tps, float crankingTaperFraction) {
percent_t IdleController::getOpenLoop(Phase phase, float rpm, float clt, SensorResult tps, float crankingTaperFraction) {
percent_t crankingValvePosition = getCrankingOpenLoop(clt);
isCranking = phase == Phase::Cranking;
@ -131,7 +139,7 @@ percent_t IdleController::getOpenLoop(Phase phase, float clt, SensorResult tps,
return interpolate2d(clt, config->iacCoastingBins, config->iacCoasting);
}
percent_t running = getRunningOpenLoop(clt, tps);
percent_t running = getRunningOpenLoop(rpm, clt, tps);
// Interpolate between cranking and running over a short time
// This clamps once you fall off the end, so no explicit check for >1 required
@ -337,7 +345,7 @@ float IdleController::getIdlePosition() {
idleState = BLIP;
} else {
// Always apply closed loop correction
iacPosition = getOpenLoop(phase, clt, tps, crankingTaper);
iacPosition = getOpenLoop(phase, rpm, clt, tps, crankingTaper);
baseIdlePosition = iacPosition;
useClosedLoop = tps.Valid && engineConfiguration->idleMode == IM_AUTO;

8
firmware/controllers/actuators/idle_thread.h
View File

@ -25,8 +25,8 @@ struct IIdleController {
virtual Phase determinePhase(int rpm, int targetRpm, SensorResult tps, float vss, float crankingTaperFraction) = 0;
virtual int getTargetRpm(float clt) = 0;
virtual float getCrankingOpenLoop(float clt) const = 0;
virtual float getRunningOpenLoop(float clt, SensorResult tps) = 0;
virtual float getOpenLoop(Phase phase, float clt, SensorResult tps, float crankingTaperFraction) = 0;
virtual float getRunningOpenLoop(float rpm, float clt, SensorResult tps) = 0;
virtual float getOpenLoop(Phase phase, float rpm, float clt, SensorResult tps, float crankingTaperFraction) = 0;
virtual float getClosedLoop(Phase phase, float tps, int rpm, int target) = 0;
virtual float getCrankingTaperFraction() const = 0;
virtual bool isIdlingOrTaper() const = 0;
@ -50,8 +50,8 @@ public:
// OPEN LOOP CORRECTIONS
percent_t getCrankingOpenLoop(float clt) const override;
percent_t getRunningOpenLoop(float clt, SensorResult tps) override;
percent_t getOpenLoop(Phase phase, float clt, SensorResult tps, float crankingTaperFraction) override;
percent_t getRunningOpenLoop(float rpm, float clt, SensorResult tps) override;
percent_t getOpenLoop(Phase phase, float rpm, float clt, SensorResult tps, float crankingTaperFraction) override;
float getIdleTimingAdjustment(int rpm) override;
float getIdleTimingAdjustment(int rpm, int targetRpm, Phase phase);

4
unit_tests/mocks.h
View File

@ -124,8 +124,8 @@ class MockIdleController : public IIdleController {
MOCK_METHOD(IIdleController::Phase, determinePhase, (int rpm, int targetRpm, SensorResult tps, float vss, float crankingTaperFraction), (override));
MOCK_METHOD(int, getTargetRpm, (float clt), (override));
MOCK_METHOD(float, getCrankingOpenLoop, (float clt), (const, override));
MOCK_METHOD(float, getRunningOpenLoop, (float clt, SensorResult tps), (override));
MOCK_METHOD(float, getOpenLoop, (IIdleController::Phase phase, float clt, SensorResult tps, float crankingTaperFraction), (override));
MOCK_METHOD(float, getRunningOpenLoop, (float rpm, float clt, SensorResult tps), (override));
MOCK_METHOD(float, getOpenLoop, (IIdleController::Phase phase, float rpm, float clt, SensorResult tps, float crankingTaperFraction), (override));
MOCK_METHOD(float, getClosedLoop, (IIdleController::Phase phase, float tps, int rpm, int target), (override));
MOCK_METHOD(float, getCrankingTaperFraction, (), (const, override));
MOCK_METHOD(bool, isIdlingOrTaper, (), (const, override));

81
unit_tests/tests/test_idle_controller.cpp
View File

@ -145,8 +145,8 @@ TEST(idle_v2, runningOpenLoopBasic) {
config->cltIdleCorr[i] = i * 0.1f;
}
EXPECT_FLOAT_EQ(5, dut.getRunningOpenLoop(10, 0));
EXPECT_FLOAT_EQ(25, dut.getRunningOpenLoop(50, 0));
EXPECT_FLOAT_EQ(5, dut.getRunningOpenLoop(0, 10, 0));
EXPECT_FLOAT_EQ(25, dut.getRunningOpenLoop(0, 50, 0));
}
TEST(idle_v2, runningFanAcBump) {
@ -164,27 +164,27 @@ TEST(idle_v2, runningFanAcBump) {
enginePins.fanRelay.setValue(0);
// Should be base position
EXPECT_FLOAT_EQ(50, dut.getRunningOpenLoop(10, 0));
EXPECT_FLOAT_EQ(50, dut.getRunningOpenLoop(0, 10, 0));
// Turn on AC!
engine->module<AcController>()->acButtonState = true;
EXPECT_FLOAT_EQ(50 + 9, dut.getRunningOpenLoop(10, 0));
EXPECT_FLOAT_EQ(50 + 9, dut.getRunningOpenLoop(0, 10, 0));
engine->module<AcController>()->acButtonState = false;
// Turn the fan on!
enginePins.fanRelay.setValue(1);
EXPECT_FLOAT_EQ(50 + 7, dut.getRunningOpenLoop(10, 0));
EXPECT_FLOAT_EQ(50 + 7, dut.getRunningOpenLoop(0, 10, 0));
enginePins.fanRelay.setValue(0);
// Turn on the other fan!
enginePins.fanRelay2.setValue(1);
EXPECT_FLOAT_EQ(50 + 3, dut.getRunningOpenLoop(10, 0));
EXPECT_FLOAT_EQ(50 + 3, dut.getRunningOpenLoop(0, 10, 0));
// Turn on everything!
engine->module<AcController>()->acButtonState = true;
enginePins.fanRelay.setValue(1);
enginePins.fanRelay2.setValue(1);
EXPECT_FLOAT_EQ(50 + 9 + 7 + 3, dut.getRunningOpenLoop(10, 0));
EXPECT_FLOAT_EQ(50 + 9 + 7 + 3, dut.getRunningOpenLoop(0, 10, 0));
}
TEST(idle_v2, runningOpenLoopTpsTaper) {
@ -200,18 +200,41 @@ TEST(idle_v2, runningOpenLoopTpsTaper) {
engineConfiguration->idlePidDeactivationTpsThreshold = 10;
// Check in-bounds points
EXPECT_FLOAT_EQ(0, dut.getRunningOpenLoop(0, 0));
EXPECT_FLOAT_EQ(25, dut.getRunningOpenLoop(0, 5));
EXPECT_FLOAT_EQ(50, dut.getRunningOpenLoop(0, 10));
EXPECT_FLOAT_EQ(0, dut.getRunningOpenLoop(0, 0, 0));
EXPECT_FLOAT_EQ(25, dut.getRunningOpenLoop(0, 0, 5));
EXPECT_FLOAT_EQ(50, dut.getRunningOpenLoop(0, 0, 10));
// Check out of bounds - shouldn't leave the interval [0, 10]
EXPECT_FLOAT_EQ(0, dut.getRunningOpenLoop(0, -5));
EXPECT_FLOAT_EQ(50, dut.getRunningOpenLoop(0, 20));
EXPECT_FLOAT_EQ(0, dut.getRunningOpenLoop(0, 0, -5));
EXPECT_FLOAT_EQ(50, dut.getRunningOpenLoop(0, 0, 20));
}
TEST(idle_v2, runningOpenLoopRpmTaper) {
EngineTestHelper eth(TEST_ENGINE);
IdleController dut;
// Zero out base tempco table
setArrayValues(config->cltIdleCorr, 0.0f);
// Add 50% idle position
engineConfiguration->airByRpmTaper = 50;
// At 2000 RPM
engineConfiguration->airTaperRpmRange = 500;
engineConfiguration->idlePidRpmUpperLimit = 1500;
// Check in-bounds points
EXPECT_FLOAT_EQ(0, dut.getRunningOpenLoop(1500, 0, 0));
EXPECT_FLOAT_EQ(25, dut.getRunningOpenLoop(1750, 0, 0));
EXPECT_FLOAT_EQ(50, dut.getRunningOpenLoop(2000, 0, 0));
// Check out of bounds - shouldn't leave the interval [1500, 2000]
EXPECT_FLOAT_EQ(0, dut.getRunningOpenLoop(200, 0, 0));
EXPECT_FLOAT_EQ(50, dut.getRunningOpenLoop(3000, 0, 0));
}
struct MockOpenLoopIdler : public IdleController {
MOCK_METHOD(float, getCrankingOpenLoop, (float clt), (const, override));
MOCK_METHOD(float, getRunningOpenLoop, (float clt, SensorResult tps), (override));
MOCK_METHOD(float, getRunningOpenLoop, (float rpm, float clt, SensorResult tps), (override));
};
TEST(idle_v2, testOpenLoopCranking) {
@ -223,31 +246,31 @@ TEST(idle_v2, testOpenLoopCranking) {
EXPECT_CALL(dut, getCrankingOpenLoop(30)).WillOnce(Return(44));
// Should return the value from getCrankingOpenLoop, and ignore running numbers
EXPECT_FLOAT_EQ(44, dut.getOpenLoop(ICP::Cranking, 30, 0, 0));
EXPECT_FLOAT_EQ(44, dut.getOpenLoop(ICP::Cranking, 0, 30, 0, 0));
}
TEST(idle_v2, openLoopRunningTaper) {
EngineTestHelper eth(TEST_ENGINE);
StrictMock<MockOpenLoopIdler> dut;
EXPECT_CALL(dut, getRunningOpenLoop(30, SensorResult(0))).WillRepeatedly(Return(25));
EXPECT_CALL(dut, getRunningOpenLoop(0, 30, SensorResult(0))).WillRepeatedly(Return(25));
EXPECT_CALL(dut, getCrankingOpenLoop(30)).WillRepeatedly(Return(75));
// 0 cycles - no taper yet, pure cranking value
EXPECT_FLOAT_EQ(75, dut.getOpenLoop(ICP::Running, 30, 0, 0));
EXPECT_FLOAT_EQ(75, dut.getOpenLoop(ICP::CrankToIdleTaper, 30, 0, 0));
EXPECT_FLOAT_EQ(75, dut.getOpenLoop(ICP::Running, 0, 30, 0, 0));
EXPECT_FLOAT_EQ(75, dut.getOpenLoop(ICP::CrankToIdleTaper, 0, 30, 0, 0));
// 1/2 taper - half way, 50% each value -> outputs 50
EXPECT_FLOAT_EQ(50, dut.getOpenLoop(ICP::Running, 30, 0, 0.5f));
EXPECT_FLOAT_EQ(50, dut.getOpenLoop(ICP::CrankToIdleTaper, 30, 0, 0.5f));
EXPECT_FLOAT_EQ(50, dut.getOpenLoop(ICP::Running, 0, 30, 0, 0.5f));
EXPECT_FLOAT_EQ(50, dut.getOpenLoop(ICP::CrankToIdleTaper, 0, 30, 0, 0.5f));
// 1x taper - fully tapered, should be running value
EXPECT_FLOAT_EQ(25, dut.getOpenLoop(ICP::Running, 30, 0, 1.0f));
EXPECT_FLOAT_EQ(25, dut.getOpenLoop(ICP::CrankToIdleTaper, 30, 0, 1.0f));
EXPECT_FLOAT_EQ(25, dut.getOpenLoop(ICP::Running, 0, 30, 0, 1.0f));
EXPECT_FLOAT_EQ(25, dut.getOpenLoop(ICP::CrankToIdleTaper, 0, 30, 0, 1.0f));
// 2x taper - still fully tapered, should be running value
EXPECT_FLOAT_EQ(25, dut.getOpenLoop(ICP::Running, 30, 0, 2.0f));
EXPECT_FLOAT_EQ(25, dut.getOpenLoop(ICP::CrankToIdleTaper, 30, 0, 2.0f));
EXPECT_FLOAT_EQ(25, dut.getOpenLoop(ICP::Running, 0, 30, 0, 2.0f));
EXPECT_FLOAT_EQ(25, dut.getOpenLoop(ICP::CrankToIdleTaper, 0, 30, 0, 2.0f));
}
TEST(idle_v2, getCrankingTaperFraction) {
@ -289,8 +312,8 @@ TEST(idle_v2, openLoopCoastingTable) {
config->iacCoasting[i] = 5 * i;
}
EXPECT_FLOAT_EQ(10, dut.getOpenLoop(ICP::Coasting, 20, 0, 2));
EXPECT_FLOAT_EQ(20, dut.getOpenLoop(ICP::Coasting, 40, 0, 2));
EXPECT_FLOAT_EQ(10, dut.getOpenLoop(ICP::Coasting, 0, 20, 0, 2));
EXPECT_FLOAT_EQ(20, dut.getOpenLoop(ICP::Coasting, 0, 40, 0, 2));
}
extern int timeNowUs;
@ -353,7 +376,7 @@ TEST(idle_v2, closedLoopDeadzone) {
struct IntegrationIdleMock : public IdleController {
MOCK_METHOD(int, getTargetRpm, (float clt), (override));
MOCK_METHOD(ICP, determinePhase, (int rpm, int targetRpm, SensorResult tps, float vss, float crankingTaperFraction), (override));
MOCK_METHOD(float, getOpenLoop, (ICP phase, float clt, SensorResult tps, float crankingTaperFraction), (override));
MOCK_METHOD(float, getOpenLoop, (ICP phase, float rpm, float clt, SensorResult tps, float crankingTaperFraction), (override));
MOCK_METHOD(float, getClosedLoop, (ICP phase, float tps, int rpm, int target), (override));
MOCK_METHOD(float, getCrankingTaperFraction, (), (const, override));
};
@ -382,7 +405,7 @@ TEST(idle_v2, IntegrationManual) {
.WillOnce(Return(ICP::Idling));
// Open loop should be asked for an open loop position
EXPECT_CALL(dut, getOpenLoop(ICP::Idling, expectedClt, expectedTps, 0.3f))
EXPECT_CALL(dut, getOpenLoop(ICP::Idling, 950, expectedClt, expectedTps, 0.3f))
.WillOnce(Return(13));
// getClosedLoop() should not be called!
@ -416,7 +439,7 @@ TEST(idle_v2, IntegrationAutomatic) {
.WillOnce(Return(ICP::Idling));
// Open loop should be asked for an open loop position
EXPECT_CALL(dut, getOpenLoop(ICP::Idling, expectedClt, expectedTps, 0.4f))
EXPECT_CALL(dut, getOpenLoop(ICP::Idling, 950, expectedClt, expectedTps, 0.4f))
.WillOnce(Return(13));
// Closed loop should get called
@ -453,7 +476,7 @@ TEST(idle_v2, IntegrationClamping) {
.WillOnce(Return(ICP::Idling));
// Open loop should be asked for an open loop position
EXPECT_CALL(dut, getOpenLoop(ICP::Idling, expectedClt, expectedTps, 0.5f))
EXPECT_CALL(dut, getOpenLoop(ICP::Idling, 950, expectedClt, expectedTps, 0.5f))
.WillOnce(Return(75));
// Closed loop should get called