diff --git a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h index 35b1a431e3..eeead0ea69 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h @@ -1027,7 +1027,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_12382 +#define SIGNATURE_HASH snap_40623 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1301,7 +1301,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.27.cypress.snap_12382" +#define TS_SIGNATURE "rusEFI 2022.11.27.cypress.snap_40623" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h index 1352b8e7e8..2287377ef4 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h @@ -1027,7 +1027,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_37522 +#define SIGNATURE_HASH snap_15459 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1301,7 +1301,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.27.kin.snap_37522" +#define TS_SIGNATURE "rusEFI 2022.11.27.kin.snap_15459" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h index fdbe19dda2..eab56a381d 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h @@ -993,7 +993,7 @@ #define show_Frankenso_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH snap_59780 +#define SIGNATURE_HASH snap_18293 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1268,7 +1268,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.27.subaru_eg33_f7.snap_59780" +#define TS_SIGNATURE "rusEFI 2022.11.27.subaru_eg33_f7.snap_18293" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/controllers/generated/rusefi_generated.h b/firmware/controllers/generated/rusefi_generated.h index ee70da38c8..86b7b93740 100644 --- a/firmware/controllers/generated/rusefi_generated.h +++ b/firmware/controllers/generated/rusefi_generated.h @@ -1027,7 +1027,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_12382 +#define SIGNATURE_HASH snap_40623 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1301,7 +1301,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2022.11.27.all.snap_12382" +#define TS_SIGNATURE "rusEFI 2022.11.27.all.snap_40623" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/controllers/generated/signature_48way.h b/firmware/controllers/generated/signature_48way.h index bc5a59044f..2503c5e133 100644 --- a/firmware/controllers/generated/signature_48way.h +++ b/firmware/controllers/generated/signature_48way.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_14353 -#define TS_SIGNATURE "rusEFI 2022.11.27.48way.snap_14353" +#define SIGNATURE_HASH snap_38624 +#define TS_SIGNATURE "rusEFI 2022.11.27.48way.snap_38624" diff --git a/firmware/controllers/generated/signature_all.h b/firmware/controllers/generated/signature_all.h index 8bc4ff77cf..3caa5e92b6 100644 --- a/firmware/controllers/generated/signature_all.h +++ b/firmware/controllers/generated/signature_all.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_12382 -#define TS_SIGNATURE "rusEFI 2022.11.27.all.snap_12382" +#define SIGNATURE_HASH snap_40623 +#define TS_SIGNATURE "rusEFI 2022.11.27.all.snap_40623" diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index 0939b10ed3..2c713a6b6e 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_44338 -#define TS_SIGNATURE "rusEFI 2022.11.27.alphax-2chan.snap_44338" +#define SIGNATURE_HASH snap_963 +#define TS_SIGNATURE "rusEFI 2022.11.27.alphax-2chan.snap_963" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index 7b6340d2fb..a7f0e37ac1 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_62417 -#define TS_SIGNATURE "rusEFI 2022.11.27.alphax-4chan.snap_62417" +#define SIGNATURE_HASH snap_23840 +#define TS_SIGNATURE "rusEFI 2022.11.27.alphax-4chan.snap_23840" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index 20d7563dcd..d758270f35 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_50553 -#define TS_SIGNATURE "rusEFI 2022.11.27.atlas.snap_50553" +#define SIGNATURE_HASH snap_27528 +#define TS_SIGNATURE "rusEFI 2022.11.27.atlas.snap_27528" diff --git a/firmware/controllers/generated/signature_core8.h b/firmware/controllers/generated/signature_core8.h index 9668710c03..7f430f3755 100644 --- a/firmware/controllers/generated/signature_core8.h +++ b/firmware/controllers/generated/signature_core8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_24999 -#define TS_SIGNATURE "rusEFI 2022.11.27.core8.snap_24999" +#define SIGNATURE_HASH snap_53078 +#define TS_SIGNATURE "rusEFI 2022.11.27.core8.snap_53078" diff --git a/firmware/controllers/generated/signature_cypress.h b/firmware/controllers/generated/signature_cypress.h index ddce4d72fc..b57e574d56 100644 --- a/firmware/controllers/generated/signature_cypress.h +++ b/firmware/controllers/generated/signature_cypress.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH snap_12382 -#define TS_SIGNATURE "rusEFI 2022.11.27.cypress.snap_12382" +#define SIGNATURE_HASH snap_40623 +#define TS_SIGNATURE "rusEFI 2022.11.27.cypress.snap_40623" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index 3abe5e95c6..22408a6a8c 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_12382 -#define TS_SIGNATURE "rusEFI 2022.11.27.f407-discovery.snap_12382" +#define SIGNATURE_HASH snap_40623 +#define TS_SIGNATURE "rusEFI 2022.11.27.f407-discovery.snap_40623" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index d9dc1ee961..8e575063d7 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_12382 -#define TS_SIGNATURE "rusEFI 2022.11.27.f429-discovery.snap_12382" +#define SIGNATURE_HASH snap_40623 +#define TS_SIGNATURE "rusEFI 2022.11.27.f429-discovery.snap_40623" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index c584227a2a..638809fad4 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_52378 -#define TS_SIGNATURE "rusEFI 2022.11.27.frankenso_na6.snap_52378" +#define SIGNATURE_HASH snap_25195 +#define TS_SIGNATURE "rusEFI 2022.11.27.frankenso_na6.snap_25195" diff --git a/firmware/controllers/generated/signature_harley81.h b/firmware/controllers/generated/signature_harley81.h index 55ec2bdad4..b76fa19704 100644 --- a/firmware/controllers/generated/signature_harley81.h +++ b/firmware/controllers/generated/signature_harley81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_30369 -#define TS_SIGNATURE "rusEFI 2022.11.27.harley81.snap_30369" +#define SIGNATURE_HASH snap_55376 +#define TS_SIGNATURE "rusEFI 2022.11.27.harley81.snap_55376" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index 2324bab629..728ead6e54 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_21338 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen-gm-e67.snap_21338" +#define SIGNATURE_HASH snap_64939 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen-gm-e67.snap_64939" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index f727068eb3..fa3ceffd74 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_402 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen-nb1.snap_402" +#define SIGNATURE_HASH snap_44899 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen-nb1.snap_44899" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index 70f3b47b30..3877519508 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_15650 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen121nissan.snap_15650" +#define SIGNATURE_HASH snap_37843 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen121nissan.snap_37843" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index d110d2d252..62bc63ff65 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_42819 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen121vag.snap_42819" +#define SIGNATURE_HASH snap_2482 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen121vag.snap_2482" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index e0ea6420d8..3479759c17 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_19813 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen128.snap_19813" +#define SIGNATURE_HASH snap_58260 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen128.snap_58260" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index 86146fc3c6..8579d92040 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_2749 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen154hyundai.snap_2749" +#define SIGNATURE_HASH snap_42060 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen154hyundai.snap_42060" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index f0d58fabcc..97ed82c959 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_16085 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen72.snap_16085" +#define SIGNATURE_HASH snap_36900 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen72.snap_36900" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index bbc3587172..e297b281e3 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_59476 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen81.snap_59476" +#define SIGNATURE_HASH snap_18085 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen81.snap_18085" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index aea82f55cd..0b21c1de48 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_9106 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellen88bmw.snap_9106" +#define SIGNATURE_HASH snap_36195 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellen88bmw.snap_36195" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index ab67127ab8..065a72ec5b 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_33129 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellenNA6.snap_33129" +#define SIGNATURE_HASH snap_12184 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellenNA6.snap_12184" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index 158a55d11d..f5ba583dfd 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_33206 -#define TS_SIGNATURE "rusEFI 2022.11.27.hellenNA8_96.snap_33206" +#define SIGNATURE_HASH snap_12103 +#define TS_SIGNATURE "rusEFI 2022.11.27.hellenNA8_96.snap_12103" diff --git a/firmware/controllers/generated/signature_kin.h b/firmware/controllers/generated/signature_kin.h index 85186baa56..f95a0cf865 100644 --- a/firmware/controllers/generated/signature_kin.h +++ b/firmware/controllers/generated/signature_kin.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH snap_37522 -#define TS_SIGNATURE "rusEFI 2022.11.27.kin.snap_37522" +#define SIGNATURE_HASH snap_15459 +#define TS_SIGNATURE "rusEFI 2022.11.27.kin.snap_15459" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index dea0e83271..21ec6b3189 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_22366 -#define TS_SIGNATURE "rusEFI 2022.11.27.mre_f4.snap_22366" +#define SIGNATURE_HASH snap_63919 +#define TS_SIGNATURE "rusEFI 2022.11.27.mre_f4.snap_63919" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index f57fa6873b..1db05b5ca8 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_22366 -#define TS_SIGNATURE "rusEFI 2022.11.27.mre_f7.snap_22366" +#define SIGNATURE_HASH snap_63919 +#define TS_SIGNATURE "rusEFI 2022.11.27.mre_f7.snap_63919" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index 6efea427d0..d953c1cf42 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_59832 -#define TS_SIGNATURE "rusEFI 2022.11.27.prometheus_405.snap_59832" +#define SIGNATURE_HASH snap_18249 +#define TS_SIGNATURE "rusEFI 2022.11.27.prometheus_405.snap_18249" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index 15b3d940d1..d3ed03a4d7 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_59832 -#define TS_SIGNATURE "rusEFI 2022.11.27.prometheus_469.snap_59832" +#define SIGNATURE_HASH snap_18249 +#define TS_SIGNATURE "rusEFI 2022.11.27.prometheus_469.snap_18249" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index ed6f8e0ac9..ff2fd2e861 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_63272 -#define TS_SIGNATURE "rusEFI 2022.11.27.proteus_f4.snap_63272" +#define SIGNATURE_HASH snap_23001 +#define TS_SIGNATURE "rusEFI 2022.11.27.proteus_f4.snap_23001" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index 963b191dc8..f4f84c42a2 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_63272 -#define TS_SIGNATURE "rusEFI 2022.11.27.proteus_f7.snap_63272" +#define SIGNATURE_HASH snap_23001 +#define TS_SIGNATURE "rusEFI 2022.11.27.proteus_f7.snap_23001" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index ace6f0ff6d..6e91d3ec0c 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_63272 -#define TS_SIGNATURE "rusEFI 2022.11.27.proteus_h7.snap_63272" +#define SIGNATURE_HASH snap_23001 +#define TS_SIGNATURE "rusEFI 2022.11.27.proteus_h7.snap_23001" diff --git a/firmware/controllers/generated/signature_subaru_eg33_f7.h b/firmware/controllers/generated/signature_subaru_eg33_f7.h index 6a3b48da64..cfd9510d97 100644 --- a/firmware/controllers/generated/signature_subaru_eg33_f7.h +++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_59780 -#define TS_SIGNATURE "rusEFI 2022.11.27.subaru_eg33_f7.snap_59780" +#define SIGNATURE_HASH snap_18293 +#define TS_SIGNATURE "rusEFI 2022.11.27.subaru_eg33_f7.snap_18293" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index bd9c47644f..1b1eceaaa3 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_65034 -#define TS_SIGNATURE "rusEFI 2022.11.27.tdg-pdm8.snap_65034" +#define SIGNATURE_HASH snap_20731 +#define TS_SIGNATURE "rusEFI 2022.11.27.tdg-pdm8.snap_20731" diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index bd1495c314..6437b87613 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.all.snap_12382" + signature = "rusEFI 2022.11.27.all.snap_40623" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.all.snap_12382" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.all.snap_40623" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:27 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:48 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5861,34 +5861,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_48way.ini b/firmware/tunerstudio/generated/rusefi_48way.ini index 45bbc03929..6e10645132 100644 --- a/firmware/tunerstudio/generated/rusefi_48way.ini +++ b/firmware/tunerstudio/generated/rusefi_48way.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.48way.snap_14353" + signature = "rusEFI 2022.11.27.48way.snap_38624" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.48way.snap_14353" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.48way.snap_38624" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:15 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:35 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5859,34 +5859,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index c502c2f1c8..9687af93ac 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.alphax-2chan.snap_44338" + signature = "rusEFI 2022.11.27.alphax-2chan.snap_963" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.alphax-2chan.snap_44338" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.alphax-2chan.snap_963" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:14:54 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:15 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index f446ca6243..dee686cce5 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.alphax-4chan.snap_62417" + signature = "rusEFI 2022.11.27.alphax-4chan.snap_23840" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.alphax-4chan.snap_62417" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.alphax-4chan.snap_23840" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:14:56 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:16 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5858,34 +5858,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index 6275d49def..0d35f1824c 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.atlas.snap_50553" + signature = "rusEFI 2022.11.27.atlas.snap_27528" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.atlas.snap_50553" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.atlas.snap_27528" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:25 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:46 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5861,34 +5861,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_core8.ini b/firmware/tunerstudio/generated/rusefi_core8.ini index b161977e20..2e909be9c2 100644 --- a/firmware/tunerstudio/generated/rusefi_core8.ini +++ b/firmware/tunerstudio/generated/rusefi_core8.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.core8.snap_24999" + signature = "rusEFI 2022.11.27.core8.snap_53078" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.core8.snap_24999" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.core8.snap_53078" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:14 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:34 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5859,34 +5859,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_cypress.ini b/firmware/tunerstudio/generated/rusefi_cypress.ini index 57be8e8db1..0e2de5936a 100644 --- a/firmware/tunerstudio/generated/rusefi_cypress.ini +++ b/firmware/tunerstudio/generated/rusefi_cypress.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.cypress.snap_12382" + signature = "rusEFI 2022.11.27.cypress.snap_40623" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.cypress.snap_12382" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.cypress.snap_40623" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sun Nov 27 13:14:52 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sun Nov 27 14:13:13 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5861,34 +5861,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index 2d694adcda..c8d2971a6b 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.f407-discovery.snap_12382" + signature = "rusEFI 2022.11.27.f407-discovery.snap_40623" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.f407-discovery.snap_12382" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.f407-discovery.snap_40623" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:23 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:43 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5861,34 +5861,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index 532773affc..cb1d87a9c4 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.f429-discovery.snap_12382" + signature = "rusEFI 2022.11.27.f429-discovery.snap_40623" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.f429-discovery.snap_12382" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.f429-discovery.snap_40623" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:24 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:45 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5861,34 +5861,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index 66614cbe35..959ebf859f 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.frankenso_na6.snap_52378" + signature = "rusEFI 2022.11.27.frankenso_na6.snap_25195" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.frankenso_na6.snap_52378" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.frankenso_na6.snap_25195" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:16 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:36 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5861,34 +5861,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_harley81.ini b/firmware/tunerstudio/generated/rusefi_harley81.ini index baa7cec36e..a1209144da 100644 --- a/firmware/tunerstudio/generated/rusefi_harley81.ini +++ b/firmware/tunerstudio/generated/rusefi_harley81.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.harley81.snap_30369" + signature = "rusEFI 2022.11.27.harley81.snap_55376" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.harley81.snap_30369" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.harley81.snap_55376" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:14:57 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:17 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index 4795e201f0..9de7d4e727 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen-gm-e67.snap_21338" + signature = "rusEFI 2022.11.27.hellen-gm-e67.snap_64939" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen-gm-e67.snap_21338" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen-gm-e67.snap_64939" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:08 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:28 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5858,34 +5858,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index 68a07417d5..a86bdb755a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen-nb1.snap_402" + signature = "rusEFI 2022.11.27.hellen-nb1.snap_44899" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen-nb1.snap_402" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen-nb1.snap_44899" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:07 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:27 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5858,34 +5858,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index 17d8f3a65a..70369d859d 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen121nissan.snap_15650" + signature = "rusEFI 2022.11.27.hellen121nissan.snap_37843" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen121nissan.snap_15650" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen121nissan.snap_37843" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:01 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:21 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index ae38df8c09..17e92434ea 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen121vag.snap_42819" + signature = "rusEFI 2022.11.27.hellen121vag.snap_2482" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen121vag.snap_42819" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen121vag.snap_2482" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:14:59 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:20 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5858,34 +5858,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini index a3fb783bd8..0664200e67 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen128.snap_19813" + signature = "rusEFI 2022.11.27.hellen128.snap_58260" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen128.snap_19813" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen128.snap_58260" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:14:58 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:18 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index ca87b687bb..340ac5d38b 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen154hyundai.snap_2749" + signature = "rusEFI 2022.11.27.hellen154hyundai.snap_42060" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen154hyundai.snap_2749" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen154hyundai.snap_42060" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:02 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:22 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index 200898c18b..aa12d40348 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen72.snap_16085" + signature = "rusEFI 2022.11.27.hellen72.snap_36900" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen72.snap_16085" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen72.snap_36900" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:04 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:24 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5858,34 +5858,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index 1d49f53d85..fa3f1735ea 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen81.snap_59476" + signature = "rusEFI 2022.11.27.hellen81.snap_18085" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen81.snap_59476" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen81.snap_18085" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:05 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:25 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5856,34 +5856,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index e3a91dbf47..8de53c69d6 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellen88bmw.snap_9106" + signature = "rusEFI 2022.11.27.hellen88bmw.snap_36195" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellen88bmw.snap_9106" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellen88bmw.snap_36195" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:03 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:23 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index 28cba062f2..afd5bcfc60 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellenNA6.snap_33129" + signature = "rusEFI 2022.11.27.hellenNA6.snap_12184" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellenNA6.snap_33129" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellenNA6.snap_12184" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:09 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:29 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5858,34 +5858,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index 4d337d52a6..8f4bd59366 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.hellenNA8_96.snap_33206" + signature = "rusEFI 2022.11.27.hellenNA8_96.snap_12103" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.hellenNA8_96.snap_33206" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.hellenNA8_96.snap_12103" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:10 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:30 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5858,34 +5858,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_kin.ini b/firmware/tunerstudio/generated/rusefi_kin.ini index ae3538a6f2..8f4607183a 100644 --- a/firmware/tunerstudio/generated/rusefi_kin.ini +++ b/firmware/tunerstudio/generated/rusefi_kin.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.kin.snap_37522" + signature = "rusEFI 2022.11.27.kin.snap_15459" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.kin.snap_37522" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.kin.snap_15459" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sun Nov 27 13:14:51 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sun Nov 27 14:13:12 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5862,34 +5862,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index 6e24cdfbcd..2764f4bd30 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.mre_f4.snap_22366" + signature = "rusEFI 2022.11.27.mre_f4.snap_63919" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.mre_f4.snap_22366" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.mre_f4.snap_63919" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:12 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:33 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5859,34 +5859,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index df871bc9dd..a4a70a819c 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.mre_f7.snap_22366" + signature = "rusEFI 2022.11.27.mre_f7.snap_63919" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.mre_f7.snap_22366" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.mre_f7.snap_63919" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:11 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:32 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5859,34 +5859,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index 18be100673..874dd5ba6b 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.prometheus_405.snap_59832" + signature = "rusEFI 2022.11.27.prometheus_405.snap_18249" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.prometheus_405.snap_59832" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.prometheus_405.snap_18249" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:18 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:39 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index ab93d09ca5..dd9dff18b9 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.prometheus_469.snap_59832" + signature = "rusEFI 2022.11.27.prometheus_469.snap_18249" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.prometheus_469.snap_59832" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.prometheus_469.snap_18249" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:17 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:37 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index 8a3d382ff9..aea79a92ba 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.proteus_f4.snap_63272" + signature = "rusEFI 2022.11.27.proteus_f4.snap_23001" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.proteus_f4.snap_63272" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.proteus_f4.snap_23001" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:20 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:41 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index 248abf0eae..d6be94709e 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.proteus_f7.snap_63272" + signature = "rusEFI 2022.11.27.proteus_f7.snap_23001" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.proteus_f7.snap_63272" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.proteus_f7.snap_23001" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:19 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:40 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index 589b29729f..59a424b3b9 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.proteus_h7.snap_63272" + signature = "rusEFI 2022.11.27.proteus_h7.snap_23001" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.proteus_h7.snap_63272" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.proteus_h7.snap_23001" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:22 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:42 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5855,34 +5855,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index 4658ebdc1a..680e49cf01 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.subaru_eg33_f7.snap_59780" + signature = "rusEFI 2022.11.27.subaru_eg33_f7.snap_18293" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.subaru_eg33_f7.snap_59780" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.subaru_eg33_f7.snap_18293" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Sun Nov 27 13:14:53 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:14 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5857,34 +5857,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index 3ec37c9d6b..189c38e990 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.11.27.tdg-pdm8.snap_65034" + signature = "rusEFI 2022.11.27.tdg-pdm8.snap_20731" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2022.11.27.tdg-pdm8.snap_65034" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2022.11.27.tdg-pdm8.snap_20731" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:26 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:47 UTC 2022 pageSize = 22800 page = 1 @@ -4717,13 +4717,13 @@ menuDialog = main groupMenu = "VE blend tables" groupChildMenu = veBlend1Cfg, "Adder 1 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend1Table, "Ignition adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } + groupChildMenu = veBlend1Table, "VE adder 1", 0, { isInjectionEnabled && veBlends1_blendParameter != 0 } groupChildMenu = veBlend2Cfg, "Adder 2 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend2Table, "Ignition adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } + groupChildMenu = veBlend2Table, "VE adder 2", 0, { isInjectionEnabled && veBlends2_blendParameter != 0 } groupChildMenu = veBlend3Cfg, "Adder 3 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend3Table, "Ignition adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } + groupChildMenu = veBlend3Table, "VE adder 3", 0, { isInjectionEnabled && veBlends3_blendParameter != 0 } groupChildMenu = veBlend4Cfg, "Adder 4 bias", 0, {isInjectionEnabled} - groupChildMenu = veBlend4Table, "Ignition adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } + groupChildMenu = veBlend4Table, "VE adder 4", 0, { isInjectionEnabled && veBlends4_blendParameter != 0 } subMenu = tChargeSettings, "Charge temperature estimation", 0, {isInjectionEnabled == 1} subMenu = baroCorrTbl, "Barometric pressure correction", 0, {isInjectionEnabled == 1 && fuelAlgorithm == 3} @@ -5861,34 +5861,82 @@ dialog = wideband_stateDialog, "wideband_state" panel = multisparkDwellParams dialog = ignAdder1Cfg, "Ignition adder 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends1_blendParameter panel = ignAdder1Bias dialog = ignAdder2Cfg, "Ignition adder 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends2_blendParameter panel = ignAdder2Bias dialog = ignAdder3Cfg, "Ignition adder 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends3_blendParameter panel = ignAdder3Bias dialog = ignAdder4Cfg, "Ignition adder 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the base ignition table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in 5.0 degrees of ignition timing added." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", ignBlends4_blendParameter panel = ignAdder4Bias dialog = veBlend1Cfg, "VE blend 1 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends1_blendParameter panel = veBlend2Bias dialog = veBlend2Cfg, "VE blend 2 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends2_blendParameter panel = veBlend2Bias dialog = veBlend3Cfg, "VE blend 3 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends3_blendParameter panel = veBlend3Bias dialog = veBlend4Cfg, "VE blend 4 config" + field = "#The bias table controls how much of the blend table" + field = "#is mixed in to the VE table. For example, a value of" + field = "#+10 in the table, with 50 as the current bias will result" + field = "#in +5.0 added to the VE." + field = "#The X axis of the bias table is controlled by the selected blend" + field = "#parameter below." field = "Blend parameter", veBlends4_blendParameter panel = veBlend4Bias diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index 95ee7a9107..0f67358e57 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 13:15:30 UTC 2022 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sun Nov 27 14:13:50 UTC 2022 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -1182,7 +1182,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI 2022.11.27.all.snap_12382"; + public static final String TS_SIGNATURE = "rusEFI 2022.11.27.all.snap_40623"; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't'; public static final int TS_TOTAL_OUTPUT_SIZE = 1260;