diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-2chan.h b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-2chan.h index 098411f317..af3e938814 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-2chan.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-2chan.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:17 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:07 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:17 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:07 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan.h b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan.h index 7d8d101791..c472e37eb5 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:26 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:15 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:26 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:15 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan_f7.h b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan_f7.h index 64bd8966ce..14539a7b77 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan_f7.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-4chan_f7.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:27 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:17 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:27 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:17 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan-revA.h b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan-revA.h index d2af9134b6..e2fd7a59ee 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan-revA.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan-revA.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:19 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:08 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:19 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:08 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan.h b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan.h index 52393d9c91..278630c4f7 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:13 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:03 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1592 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1596 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22444); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:13 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:03 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan_f7.h b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan_f7.h index e997c25c17..ae1eeb7580 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan_f7.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_alphax-8chan_f7.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:16 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:06 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1592 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1596 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22444); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:16 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:06 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_at_start_f435.h b/firmware/controllers/generated/engine_configuration_generated_structures_at_start_f435.h index 6da888ae43..27b9caa741 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_at_start_f435.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_at_start_f435.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:00 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:49 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:00 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:49 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_atlas.h b/firmware/controllers/generated/engine_configuration_generated_structures_atlas.h index d700fb1429..65d4d23640 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_atlas.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_atlas.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:51 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:40 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 21928); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:51 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:40 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_f407-discovery.h b/firmware/controllers/generated/engine_configuration_generated_structures_f407-discovery.h index 828431cc47..ccf463ec1c 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_f407-discovery.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_f407-discovery.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:07 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:56 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:07 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:56 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_f429-discovery.h b/firmware/controllers/generated/engine_configuration_generated_structures_f429-discovery.h index 7f233e4069..faa96f658d 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_f429-discovery.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_f429-discovery.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:52 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:41 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:52 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:41 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_f469-discovery.h b/firmware/controllers/generated/engine_configuration_generated_structures_f469-discovery.h index 3514242cbc..1a6de17e86 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_f469-discovery.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_f469-discovery.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:54 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:43 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:54 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:43 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_frankenso_na6.h b/firmware/controllers/generated/engine_configuration_generated_structures_frankenso_na6.h index a64ea3f87f..64677d2745 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_frankenso_na6.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_frankenso_na6.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:50 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:39 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:50 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:39 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_haba208.h b/firmware/controllers/generated/engine_configuration_generated_structures_haba208.h index 8b2b1044a2..a885640b51 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_haba208.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_haba208.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:28 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:18 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:28 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:18 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen-112-17.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen-112-17.h index 84d5f603e1..a314ae0ed0 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen-112-17.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen-112-17.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:01 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:50 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:01 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:50 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen-gm-e67.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen-gm-e67.h index cfc204c3e3..01b8ef9ee5 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen-gm-e67.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen-gm-e67.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:06 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:56 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:06 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:56 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen-honda-k.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen-honda-k.h index 6620ec71a7..d424864795 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen-honda-k.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen-honda-k.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:03 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:53 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23100); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:03 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:53 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen-nb1.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen-nb1.h index 90287cab65..cd3d4fd977 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen-nb1.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen-nb1.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:20 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:10 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:20 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:10 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen121nissan.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen121nissan.h index 950ac98907..a64407f2ca 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen121nissan.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen121nissan.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:12 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:02 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:12 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:02 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen121vag.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen121vag.h index 52101f3592..fda964f185 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen121vag.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen121vag.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:52 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:42 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:52 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:42 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen128.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen128.h index 3f1d2bd953..65a74d31cc 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen128.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen128.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:08 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:57 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:08 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:57 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai.h index 9a5001d6f0..8eb4eb8de9 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:54 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:43 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:54 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:43 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai_f7.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai_f7.h index abec4ed93e..0c666fd014 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai_f7.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen154hyundai_f7.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:55 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:45 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:55 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:45 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen72.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen72.h index 09925cffee..f9e9356ebc 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen72.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen72.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:21 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:11 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:21 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:11 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen81.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen81.h index af9b3adbba..b7278f120a 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen81.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen81.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:59 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:49 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:59 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:49 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellen88bmw.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellen88bmw.h index edeab14fbe..114e4110dc 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellen88bmw.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellen88bmw.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:57 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:46 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:57 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:46 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellenNA6.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellenNA6.h index bfadf390b3..7a0f5f7923 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellenNA6.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellenNA6.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:09 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:59 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:09 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:59 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_hellenNA8_96.h b/firmware/controllers/generated/engine_configuration_generated_structures_hellenNA8_96.h index eb199319a6..24636775a8 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_hellenNA8_96.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_hellenNA8_96.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:51 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:41 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:05:51 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:41 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_m74_9.h b/firmware/controllers/generated/engine_configuration_generated_structures_m74_9.h index 513725888a..3536bed63c 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_m74_9.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_m74_9.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:35 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:25 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:35 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:25 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_mre_f4.h b/firmware/controllers/generated/engine_configuration_generated_structures_mre_f4.h index fdd64898ad..0cfbc03de5 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_mre_f4.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_mre_f4.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:30 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:19 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:30 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:19 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_mre_f7.h b/firmware/controllers/generated/engine_configuration_generated_structures_mre_f7.h index 1a24f9b295..aa02ab1ffe 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_mre_f7.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_mre_f7.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:31 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:21 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:31 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:21 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_nucleo_f413.h b/firmware/controllers/generated/engine_configuration_generated_structures_nucleo_f413.h index 494f8f5ca9..643a386399 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_nucleo_f413.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_nucleo_f413.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:55 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:44 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:55 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:44 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_prometheus_405.h b/firmware/controllers/generated/engine_configuration_generated_structures_prometheus_405.h index 7e8e743c4e..9fa573dadd 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_prometheus_405.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_prometheus_405.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:03 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:52 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:03 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:52 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_prometheus_469.h b/firmware/controllers/generated/engine_configuration_generated_structures_prometheus_469.h index 922e685871..420e9f28fa 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_prometheus_469.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_prometheus_469.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:04 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:53 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:04 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:53 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_proteus_f4.h b/firmware/controllers/generated/engine_configuration_generated_structures_proteus_f4.h index ffaeee8996..a468aa797e 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_proteus_f4.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_proteus_f4.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:37 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:26 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 26428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:37 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:26 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_proteus_f7.h b/firmware/controllers/generated/engine_configuration_generated_structures_proteus_f7.h index c1914d8f9c..4932de2613 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_proteus_f7.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_proteus_f7.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:38 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:28 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 26428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:38 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:28 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_proteus_h7.h b/firmware/controllers/generated/engine_configuration_generated_structures_proteus_h7.h index 1cd480d6a8..91cd7526ac 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_proteus_h7.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_proteus_h7.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:40 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:29 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 26428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:40 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:29 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_s105.h b/firmware/controllers/generated/engine_configuration_generated_structures_s105.h index 4128ec3713..a810d2aeb5 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_s105.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_s105.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:34 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:23 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:34 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:23 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_small-can-board.h b/firmware/controllers/generated/engine_configuration_generated_structures_small-can-board.h index f733a58d3b..b3c93f4467 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_small-can-board.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_small-can-board.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:23 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:13 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:23 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:13 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_stm32f429_nucleo.h b/firmware/controllers/generated/engine_configuration_generated_structures_stm32f429_nucleo.h index ff75381ba2..51766d2938 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_stm32f429_nucleo.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_stm32f429_nucleo.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:33 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:22 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:33 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:22 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_stm32f767_nucleo.h b/firmware/controllers/generated/engine_configuration_generated_structures_stm32f767_nucleo.h index 439082daad..b90fecd77e 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_stm32f767_nucleo.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_stm32f767_nucleo.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:56 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:45 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:56 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:45 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_stm32h743_nucleo.h b/firmware/controllers/generated/engine_configuration_generated_structures_stm32h743_nucleo.h index 554f8370c7..3fd0d21541 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_stm32h743_nucleo.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_stm32h743_nucleo.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:01 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:50 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:01 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:50 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_t-b-g.h b/firmware/controllers/generated/engine_configuration_generated_structures_t-b-g.h index 625af42877..8c2a7853bc 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_t-b-g.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_t-b-g.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:05 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:54 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:05 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:54 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_tdg-pdm8.h b/firmware/controllers/generated/engine_configuration_generated_structures_tdg-pdm8.h index ba453fdb03..099885ecec 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_tdg-pdm8.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_tdg-pdm8.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:09 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:58 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:07:09 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:58 UTC 2024 diff --git a/firmware/controllers/generated/engine_configuration_generated_structures_uaefi.h b/firmware/controllers/generated/engine_configuration_generated_structures_uaefi.h index 92c9a3fea1..beb233d665 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures_uaefi.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures_uaefi.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:10 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:00 UTC 2024 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -29,7 +29,7 @@ static_assert(sizeof(stft_cell_cfg_s) == 4); // start of stft_s struct stft_s { /** - * Below this RPM, the idle region is active + * Below this RPM, the idle region is active, idle+300 would be a good value * units: RPM * offset 0 */ @@ -2919,7 +2919,7 @@ struct engine_configuration_s { offset 1576 bit 31 */ bool unusedBit_511_31 : 1 {}; /** - * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. + * This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better * units: cycles * offset 1580 */ @@ -5634,4 +5634,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 22428); // end -// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Thu Mar 14 21:06:10 UTC 2024 +// this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:00 UTC 2024 diff --git a/firmware/controllers/generated/rusefi_generated_alphax-2chan.h b/firmware/controllers/generated/rusefi_generated_alphax-2chan.h index e308b5f796..567b2c558f 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-2chan.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-2chan.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1642592406 +#define SIGNATURE_HASH 777639242 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins false #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-2chan.1642592406" +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-2chan.777639242" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-4chan.h b/firmware/controllers/generated/rusefi_generated_alphax-4chan.h index 55e85167c3..acb6b0478c 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-4chan.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-4chan.h @@ -1189,7 +1189,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2926296125 +#define SIGNATURE_HASH 3788870113 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1558,7 +1558,7 @@ #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins false #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-4chan.2926296125" +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-4chan.3788870113" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h b/firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h index 45f7d851f9..c02139bc4c 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h @@ -1189,7 +1189,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2926296125 +#define SIGNATURE_HASH 3788870113 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1558,7 +1558,7 @@ #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins false #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-4chan_f7.2926296125" +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-4chan_f7.3788870113" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h b/firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h index f4d070b09b..1a795c5cd8 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1486801327 +#define SIGNATURE_HASH 388031603 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan-revA.1486801327" +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan-revA.388031603" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-8chan.h b/firmware/controllers/generated/rusefi_generated_alphax-8chan.h index 51516bc9f5..af2c171b79 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-8chan.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-8chan.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 567342916 +#define SIGNATURE_HASH 1852758680 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins false #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan.567342916" +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan.1852758680" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h b/firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h index ce2e1af094..814689566b 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 567342916 +#define SIGNATURE_HASH 1852758680 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins false #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan_f7.567342916" +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan_f7.1852758680" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_at_start_f435.h b/firmware/controllers/generated/rusefi_generated_at_start_f435.h index 55573110d9..1f9e59c306 100644 --- a/firmware/controllers/generated/rusefi_generated_at_start_f435.h +++ b/firmware/controllers/generated/rusefi_generated_at_start_f435.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 259342904 +#define SIGNATURE_HASH 1087074276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.at_start_f435.259342904" +#define TS_SIGNATURE "rusEFI master.2024.03.15.at_start_f435.1087074276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_atlas.h b/firmware/controllers/generated/rusefi_generated_atlas.h index d9af0010ad..47b2dae932 100644 --- a/firmware/controllers/generated/rusefi_generated_atlas.h +++ b/firmware/controllers/generated/rusefi_generated_atlas.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1265800822 +#define SIGNATURE_HASH 80526250 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.atlas.1265800822" +#define TS_SIGNATURE "rusEFI master.2024.03.15.atlas.80526250" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_f407-discovery.h b/firmware/controllers/generated/rusefi_generated_f407-discovery.h index a6284174ab..fc19e97c5d 100644 --- a/firmware/controllers/generated/rusefi_generated_f407-discovery.h +++ b/firmware/controllers/generated/rusefi_generated_f407-discovery.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets true -#define SIGNATURE_HASH 2871310681 +#define SIGNATURE_HASH 3835335813 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.f407-discovery.2871310681" +#define TS_SIGNATURE "rusEFI master.2024.03.15.f407-discovery.3835335813" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_f429-discovery.h b/firmware/controllers/generated/rusefi_generated_f429-discovery.h index 6a6aba7e56..b4d12a3643 100644 --- a/firmware/controllers/generated/rusefi_generated_f429-discovery.h +++ b/firmware/controllers/generated/rusefi_generated_f429-discovery.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 259342904 +#define SIGNATURE_HASH 1087074276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.f429-discovery.259342904" +#define TS_SIGNATURE "rusEFI master.2024.03.15.f429-discovery.1087074276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_f469-discovery.h b/firmware/controllers/generated/rusefi_generated_f469-discovery.h index f244971dce..66572367e3 100644 --- a/firmware/controllers/generated/rusefi_generated_f469-discovery.h +++ b/firmware/controllers/generated/rusefi_generated_f469-discovery.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1034044587 +#define SIGNATURE_HASH 1914464631 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.f469-discovery.1034044587" +#define TS_SIGNATURE "rusEFI master.2024.03.15.f469-discovery.1914464631" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_frankenso_na6.h b/firmware/controllers/generated/rusefi_generated_frankenso_na6.h index 42d3808684..943107dd19 100644 --- a/firmware/controllers/generated/rusefi_generated_frankenso_na6.h +++ b/firmware/controllers/generated/rusefi_generated_frankenso_na6.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets true -#define SIGNATURE_HASH 1509307939 +#define SIGNATURE_HASH 373824511 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.frankenso_na6.1509307939" +#define TS_SIGNATURE "rusEFI master.2024.03.15.frankenso_na6.373824511" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_haba208.h b/firmware/controllers/generated/rusefi_generated_haba208.h index 6ef3495371..0aab868df4 100644 --- a/firmware/controllers/generated/rusefi_generated_haba208.h +++ b/firmware/controllers/generated/rusefi_generated_haba208.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 259342904 +#define SIGNATURE_HASH 1087074276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.haba208.259342904" +#define TS_SIGNATURE "rusEFI master.2024.03.15.haba208.1087074276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen-112-17.h b/firmware/controllers/generated/rusefi_generated_hellen-112-17.h index a731e1f37a..d010e8abaf 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen-112-17.h +++ b/firmware/controllers/generated/rusefi_generated_hellen-112-17.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2256394940 +#define SIGNATURE_HASH 3385063264 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-112-17.2256394940" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-112-17.3385063264" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen-gm-e67.h b/firmware/controllers/generated/rusefi_generated_hellen-gm-e67.h index 9d3513b8f3..f0a6434b70 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen-gm-e67.h +++ b/firmware/controllers/generated/rusefi_generated_hellen-gm-e67.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3272353152 +#define SIGNATURE_HASH 2360477788 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-gm-e67.3272353152" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-gm-e67.2360477788" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen-honda-k.h b/firmware/controllers/generated/rusefi_generated_hellen-honda-k.h index 9857687a56..7b2c436d13 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen-honda-k.h +++ b/firmware/controllers/generated/rusefi_generated_hellen-honda-k.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 752052793 +#define SIGNATURE_HASH 1668106213 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1558,7 +1558,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-honda-k.752052793" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-honda-k.1668106213" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen-nb1.h b/firmware/controllers/generated/rusefi_generated_hellen-nb1.h index 4c2e44a853..0e1c9de6e4 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen-nb1.h +++ b/firmware/controllers/generated/rusefi_generated_hellen-nb1.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3865949208 +#define SIGNATURE_HASH 2849216964 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-nb1.3865949208" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-nb1.2849216964" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen121nissan.h b/firmware/controllers/generated/rusefi_generated_hellen121nissan.h index 2a84c96e5b..79d2331f38 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen121nissan.h +++ b/firmware/controllers/generated/rusefi_generated_hellen121nissan.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 584051759 +#define SIGNATURE_HASH 1836171763 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen121nissan.584051759" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen121nissan.1836171763" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen121vag.h b/firmware/controllers/generated/rusefi_generated_hellen121vag.h index e60e33ce05..4adc1f6bd0 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen121vag.h +++ b/firmware/controllers/generated/rusefi_generated_hellen121vag.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1057775582 +#define SIGNATURE_HASH 1890742786 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen121vag.1057775582" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen121vag.1890742786" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen128.h b/firmware/controllers/generated/rusefi_generated_hellen128.h index b54b8261e6..ecb82a1a51 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen128.h +++ b/firmware/controllers/generated/rusefi_generated_hellen128.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3806816463 +#define SIGNATURE_HASH 2908308755 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen128.3806816463" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen128.2908308755" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen154hyundai.h b/firmware/controllers/generated/rusefi_generated_hellen154hyundai.h index 8a7f213bd0..880b9b27d3 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen154hyundai.h +++ b/firmware/controllers/generated/rusefi_generated_hellen154hyundai.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1662869749 +#define SIGNATURE_HASH 748899625 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen154hyundai.1662869749" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen154hyundai.748899625" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h b/firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h index 3a0586eb2f..d448f7c634 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h +++ b/firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1662869749 +#define SIGNATURE_HASH 748899625 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen154hyundai_f7.1662869749" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen154hyundai_f7.748899625" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen72.h b/firmware/controllers/generated/rusefi_generated_hellen72.h index 5df2a89300..0a7a64d876 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen72.h +++ b/firmware/controllers/generated/rusefi_generated_hellen72.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2408887972 +#define SIGNATURE_HASH 3224017784 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen72.2408887972" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen72.3224017784" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen81.h b/firmware/controllers/generated/rusefi_generated_hellen81.h index 1e408e4797..0f08875ed5 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen81.h +++ b/firmware/controllers/generated/rusefi_generated_hellen81.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1793446622 +#define SIGNATURE_HASH 626786050 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen81.1793446622" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen81.626786050" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen88bmw.h b/firmware/controllers/generated/rusefi_generated_hellen88bmw.h index 16be8115fd..691d2c766b 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen88bmw.h +++ b/firmware/controllers/generated/rusefi_generated_hellen88bmw.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2110179229 +#define SIGNATURE_HASH 846785089 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output false -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen88bmw.2110179229" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen88bmw.846785089" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellenNA6.h b/firmware/controllers/generated/rusefi_generated_hellenNA6.h index 38681b2e6e..03193f5a11 100644 --- a/firmware/controllers/generated/rusefi_generated_hellenNA6.h +++ b/firmware/controllers/generated/rusefi_generated_hellenNA6.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2614141400 +#define SIGNATURE_HASH 3564014596 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellenNA6.2614141400" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellenNA6.3564014596" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellenNA8_96.h b/firmware/controllers/generated/rusefi_generated_hellenNA8_96.h index 91c2b77b26..79145d9e07 100644 --- a/firmware/controllers/generated/rusefi_generated_hellenNA8_96.h +++ b/firmware/controllers/generated/rusefi_generated_hellenNA8_96.h @@ -1189,7 +1189,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1678435094 +#define SIGNATURE_HASH 733269706 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1558,7 +1558,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellenNA8_96.1678435094" +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellenNA8_96.733269706" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_m74_9.h b/firmware/controllers/generated/rusefi_generated_m74_9.h index 753f0300e1..1f27a15ded 100644 --- a/firmware/controllers/generated/rusefi_generated_m74_9.h +++ b/firmware/controllers/generated/rusefi_generated_m74_9.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3150936807 +#define SIGNATURE_HASH 4101068603 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.m74_9.3150936807" +#define TS_SIGNATURE "rusEFI master.2024.03.15.m74_9.4101068603" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_mre_f4.h b/firmware/controllers/generated/rusefi_generated_mre_f4.h index d614d2369d..a202e7f90f 100644 --- a/firmware/controllers/generated/rusefi_generated_mre_f4.h +++ b/firmware/controllers/generated/rusefi_generated_mre_f4.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets true #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 213523655 +#define SIGNATURE_HASH 1124348187 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.mre_f4.213523655" +#define TS_SIGNATURE "rusEFI master.2024.03.15.mre_f4.1124348187" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_mre_f7.h b/firmware/controllers/generated/rusefi_generated_mre_f7.h index ce7c00cabf..f7cb15d4cc 100644 --- a/firmware/controllers/generated/rusefi_generated_mre_f7.h +++ b/firmware/controllers/generated/rusefi_generated_mre_f7.h @@ -1188,7 +1188,7 @@ #define show_microRusEFI_presets true #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 213523655 +#define SIGNATURE_HASH 1124348187 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.mre_f7.213523655" +#define TS_SIGNATURE "rusEFI master.2024.03.15.mre_f7.1124348187" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_nucleo_f413.h b/firmware/controllers/generated/rusefi_generated_nucleo_f413.h index 9445279a1f..d65b214889 100644 --- a/firmware/controllers/generated/rusefi_generated_nucleo_f413.h +++ b/firmware/controllers/generated/rusefi_generated_nucleo_f413.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 259342904 +#define SIGNATURE_HASH 1087074276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.nucleo_f413.259342904" +#define TS_SIGNATURE "rusEFI master.2024.03.15.nucleo_f413.1087074276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_prometheus_405.h b/firmware/controllers/generated/rusefi_generated_prometheus_405.h index 8b8a380777..c34c8b629d 100644 --- a/firmware/controllers/generated/rusefi_generated_prometheus_405.h +++ b/firmware/controllers/generated/rusefi_generated_prometheus_405.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1071746984 +#define SIGNATURE_HASH 1885315700 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.prometheus_405.1071746984" +#define TS_SIGNATURE "rusEFI master.2024.03.15.prometheus_405.1885315700" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_prometheus_469.h b/firmware/controllers/generated/rusefi_generated_prometheus_469.h index 0cb43acd50..98a417283d 100644 --- a/firmware/controllers/generated/rusefi_generated_prometheus_469.h +++ b/firmware/controllers/generated/rusefi_generated_prometheus_469.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1071746984 +#define SIGNATURE_HASH 1885315700 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.prometheus_469.1071746984" +#define TS_SIGNATURE "rusEFI master.2024.03.15.prometheus_469.1885315700" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_proteus_f4.h b/firmware/controllers/generated/rusefi_generated_proteus_f4.h index 04f39eb36e..1d1deb94f2 100644 --- a/firmware/controllers/generated/rusefi_generated_proteus_f4.h +++ b/firmware/controllers/generated/rusefi_generated_proteus_f4.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets true #define show_test_presets false -#define SIGNATURE_HASH 3872564431 +#define SIGNATURE_HASH 2842462483 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_f4.3872564431" +#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_f4.2842462483" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_proteus_f7.h b/firmware/controllers/generated/rusefi_generated_proteus_f7.h index 1152f3ee44..66488d755b 100644 --- a/firmware/controllers/generated/rusefi_generated_proteus_f7.h +++ b/firmware/controllers/generated/rusefi_generated_proteus_f7.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets true #define show_test_presets false -#define SIGNATURE_HASH 3872564431 +#define SIGNATURE_HASH 2842462483 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_f7.3872564431" +#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_f7.2842462483" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_proteus_h7.h b/firmware/controllers/generated/rusefi_generated_proteus_h7.h index 2668871b47..5c63612b8e 100644 --- a/firmware/controllers/generated/rusefi_generated_proteus_h7.h +++ b/firmware/controllers/generated/rusefi_generated_proteus_h7.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets true #define show_test_presets false -#define SIGNATURE_HASH 3872564431 +#define SIGNATURE_HASH 2842462483 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_h7.3872564431" +#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_h7.2842462483" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_s105.h b/firmware/controllers/generated/rusefi_generated_s105.h index fc36eb5a51..9492ad1003 100644 --- a/firmware/controllers/generated/rusefi_generated_s105.h +++ b/firmware/controllers/generated/rusefi_generated_s105.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2969486074 +#define SIGNATURE_HASH 4282445606 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.s105.2969486074" +#define TS_SIGNATURE "rusEFI master.2024.03.15.s105.4282445606" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_small-can-board.h b/firmware/controllers/generated/rusefi_generated_small-can-board.h index 32a37681dd..58287d7afe 100644 --- a/firmware/controllers/generated/rusefi_generated_small-can-board.h +++ b/firmware/controllers/generated/rusefi_generated_small-can-board.h @@ -1188,7 +1188,7 @@ #define show_Proteus_presets false #define show_small_can_board_presets true #define show_test_presets false -#define SIGNATURE_HASH 836013745 +#define SIGNATURE_HASH 2120917869 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1558,7 +1558,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.small-can-board.836013745" +#define TS_SIGNATURE "rusEFI master.2024.03.15.small-can-board.2120917869" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h b/firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h index 79e1ac6e40..8e29a984d1 100644 --- a/firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h +++ b/firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 259342904 +#define SIGNATURE_HASH 1087074276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32f429_nucleo.259342904" +#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32f429_nucleo.1087074276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h b/firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h index c6b2a5a9bb..d1f23eea0f 100644 --- a/firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h +++ b/firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 259342904 +#define SIGNATURE_HASH 1087074276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32f767_nucleo.259342904" +#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32f767_nucleo.1087074276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h b/firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h index 292a7e698e..9f241a6c33 100644 --- a/firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h +++ b/firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 259342904 +#define SIGNATURE_HASH 1087074276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32h743_nucleo.259342904" +#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32h743_nucleo.1087074276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_t-b-g.h b/firmware/controllers/generated/rusefi_generated_t-b-g.h index 2bf9784b60..8baea3dc09 100644 --- a/firmware/controllers/generated/rusefi_generated_t-b-g.h +++ b/firmware/controllers/generated/rusefi_generated_t-b-g.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 259342904 +#define SIGNATURE_HASH 1087074276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.t-b-g.259342904" +#define TS_SIGNATURE "rusEFI master.2024.03.15.t-b-g.1087074276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_tdg-pdm8.h b/firmware/controllers/generated/rusefi_generated_tdg-pdm8.h index 9e72ef0d2b..2b4cc0a11f 100644 --- a/firmware/controllers/generated/rusefi_generated_tdg-pdm8.h +++ b/firmware/controllers/generated/rusefi_generated_tdg-pdm8.h @@ -1187,7 +1187,7 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2245750298 +#define SIGNATURE_HASH 3395634118 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1556,7 +1556,7 @@ #define ts_show_vr_threshold_all false #define ts_show_vr_threshold_pins true #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.tdg-pdm8.2245750298" +#define TS_SIGNATURE "rusEFI master.2024.03.15.tdg-pdm8.3395634118" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_uaefi.h b/firmware/controllers/generated/rusefi_generated_uaefi.h index 6c273bd2ac..36195a915c 100644 --- a/firmware/controllers/generated/rusefi_generated_uaefi.h +++ b/firmware/controllers/generated/rusefi_generated_uaefi.h @@ -1188,7 +1188,7 @@ #define show_Proteus_presets false #define show_test_presets false #define show_uaefi_presets true -#define SIGNATURE_HASH 1963933443 +#define SIGNATURE_HASH 984683231 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1557,7 +1557,7 @@ #define ts_show_vr_threshold_all true #define ts_show_vr_threshold_pins false #define ts_show_vvt_output true -#define TS_SIGNATURE "rusEFI master.2024.03.15.uaefi.1963933443" +#define TS_SIGNATURE "rusEFI master.2024.03.15.uaefi.984683231" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index 704d411562..45c19cc461 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1642592406 -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-2chan.1642592406" +#define SIGNATURE_HASH 777639242 +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-2chan.777639242" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index 06fad52d8d..d6dc9df309 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2926296125 -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-4chan.2926296125" +#define SIGNATURE_HASH 3788870113 +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-4chan.3788870113" diff --git a/firmware/controllers/generated/signature_alphax-4chan_f7.h b/firmware/controllers/generated/signature_alphax-4chan_f7.h index 93add5b6ee..b856c4bbf1 100644 --- a/firmware/controllers/generated/signature_alphax-4chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-4chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2926296125 -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-4chan_f7.2926296125" +#define SIGNATURE_HASH 3788870113 +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-4chan_f7.3788870113" diff --git a/firmware/controllers/generated/signature_alphax-8chan-revA.h b/firmware/controllers/generated/signature_alphax-8chan-revA.h index 1572a83de7..c34cfca07b 100644 --- a/firmware/controllers/generated/signature_alphax-8chan-revA.h +++ b/firmware/controllers/generated/signature_alphax-8chan-revA.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1486801327 -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan-revA.1486801327" +#define SIGNATURE_HASH 388031603 +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan-revA.388031603" diff --git a/firmware/controllers/generated/signature_alphax-8chan.h b/firmware/controllers/generated/signature_alphax-8chan.h index f253b180e8..f47d3cb0e0 100644 --- a/firmware/controllers/generated/signature_alphax-8chan.h +++ b/firmware/controllers/generated/signature_alphax-8chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 567342916 -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan.567342916" +#define SIGNATURE_HASH 1852758680 +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan.1852758680" diff --git a/firmware/controllers/generated/signature_alphax-8chan_f7.h b/firmware/controllers/generated/signature_alphax-8chan_f7.h index 2a3d51baba..de9d03d3bf 100644 --- a/firmware/controllers/generated/signature_alphax-8chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-8chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 567342916 -#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan_f7.567342916" +#define SIGNATURE_HASH 1852758680 +#define TS_SIGNATURE "rusEFI master.2024.03.15.alphax-8chan_f7.1852758680" diff --git a/firmware/controllers/generated/signature_at_start_f435.h b/firmware/controllers/generated/signature_at_start_f435.h index c8e1d2fc14..4c58f8919f 100644 --- a/firmware/controllers/generated/signature_at_start_f435.h +++ b/firmware/controllers/generated/signature_at_start_f435.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 259342904 -#define TS_SIGNATURE "rusEFI master.2024.03.15.at_start_f435.259342904" +#define SIGNATURE_HASH 1087074276 +#define TS_SIGNATURE "rusEFI master.2024.03.15.at_start_f435.1087074276" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index 701178a622..a2f53ee355 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1265800822 -#define TS_SIGNATURE "rusEFI master.2024.03.15.atlas.1265800822" +#define SIGNATURE_HASH 80526250 +#define TS_SIGNATURE "rusEFI master.2024.03.15.atlas.80526250" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index bbca5144ed..7d61b6705d 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2871310681 -#define TS_SIGNATURE "rusEFI master.2024.03.15.f407-discovery.2871310681" +#define SIGNATURE_HASH 3835335813 +#define TS_SIGNATURE "rusEFI master.2024.03.15.f407-discovery.3835335813" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index 609e76dcec..05ee7b26c9 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 259342904 -#define TS_SIGNATURE "rusEFI master.2024.03.15.f429-discovery.259342904" +#define SIGNATURE_HASH 1087074276 +#define TS_SIGNATURE "rusEFI master.2024.03.15.f429-discovery.1087074276" diff --git a/firmware/controllers/generated/signature_f469-discovery.h b/firmware/controllers/generated/signature_f469-discovery.h index ffc37b9e6c..b5fffee4e2 100644 --- a/firmware/controllers/generated/signature_f469-discovery.h +++ b/firmware/controllers/generated/signature_f469-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1034044587 -#define TS_SIGNATURE "rusEFI master.2024.03.15.f469-discovery.1034044587" +#define SIGNATURE_HASH 1914464631 +#define TS_SIGNATURE "rusEFI master.2024.03.15.f469-discovery.1914464631" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index 46180f8c1a..f7e342850c 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1509307939 -#define TS_SIGNATURE "rusEFI master.2024.03.15.frankenso_na6.1509307939" +#define SIGNATURE_HASH 373824511 +#define TS_SIGNATURE "rusEFI master.2024.03.15.frankenso_na6.373824511" diff --git a/firmware/controllers/generated/signature_haba208.h b/firmware/controllers/generated/signature_haba208.h index 2438962cbf..7f97c1f52c 100644 --- a/firmware/controllers/generated/signature_haba208.h +++ b/firmware/controllers/generated/signature_haba208.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 259342904 -#define TS_SIGNATURE "rusEFI master.2024.03.15.haba208.259342904" +#define SIGNATURE_HASH 1087074276 +#define TS_SIGNATURE "rusEFI master.2024.03.15.haba208.1087074276" diff --git a/firmware/controllers/generated/signature_hellen-112-17.h b/firmware/controllers/generated/signature_hellen-112-17.h index 57f5a70cd8..92ad7481b5 100644 --- a/firmware/controllers/generated/signature_hellen-112-17.h +++ b/firmware/controllers/generated/signature_hellen-112-17.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2256394940 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-112-17.2256394940" +#define SIGNATURE_HASH 3385063264 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-112-17.3385063264" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index a52b99b9c3..5d4030eb6f 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3272353152 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-gm-e67.3272353152" +#define SIGNATURE_HASH 2360477788 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-gm-e67.2360477788" diff --git a/firmware/controllers/generated/signature_hellen-honda-k.h b/firmware/controllers/generated/signature_hellen-honda-k.h index 08e111ae93..6ac3be01d8 100644 --- a/firmware/controllers/generated/signature_hellen-honda-k.h +++ b/firmware/controllers/generated/signature_hellen-honda-k.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 752052793 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-honda-k.752052793" +#define SIGNATURE_HASH 1668106213 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-honda-k.1668106213" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index c35a050684..de2efa1094 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3865949208 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-nb1.3865949208" +#define SIGNATURE_HASH 2849216964 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen-nb1.2849216964" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index 587861f5ec..8cd093a1b8 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 584051759 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen121nissan.584051759" +#define SIGNATURE_HASH 1836171763 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen121nissan.1836171763" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index 3f925ebc14..e69a5b1fb7 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1057775582 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen121vag.1057775582" +#define SIGNATURE_HASH 1890742786 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen121vag.1890742786" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index 100d1a84f5..da58056552 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3806816463 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen128.3806816463" +#define SIGNATURE_HASH 2908308755 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen128.2908308755" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index 0a7ce4f22a..c8e434805c 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1662869749 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen154hyundai.1662869749" +#define SIGNATURE_HASH 748899625 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen154hyundai.748899625" diff --git a/firmware/controllers/generated/signature_hellen154hyundai_f7.h b/firmware/controllers/generated/signature_hellen154hyundai_f7.h index b349f0016f..02483e86aa 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai_f7.h +++ b/firmware/controllers/generated/signature_hellen154hyundai_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1662869749 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen154hyundai_f7.1662869749" +#define SIGNATURE_HASH 748899625 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen154hyundai_f7.748899625" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index 7affc151ba..0eef1300ee 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2408887972 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen72.2408887972" +#define SIGNATURE_HASH 3224017784 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen72.3224017784" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index 364299aa14..2a85cc0234 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1793446622 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen81.1793446622" +#define SIGNATURE_HASH 626786050 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen81.626786050" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index 2bb27ea883..140cc6751e 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2110179229 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen88bmw.2110179229" +#define SIGNATURE_HASH 846785089 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellen88bmw.846785089" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index 3018b1eb17..32bd31a929 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2614141400 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellenNA6.2614141400" +#define SIGNATURE_HASH 3564014596 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellenNA6.3564014596" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index 5d9cedeb0e..dcea0ac9e3 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1678435094 -#define TS_SIGNATURE "rusEFI master.2024.03.15.hellenNA8_96.1678435094" +#define SIGNATURE_HASH 733269706 +#define TS_SIGNATURE "rusEFI master.2024.03.15.hellenNA8_96.733269706" diff --git a/firmware/controllers/generated/signature_m74_9.h b/firmware/controllers/generated/signature_m74_9.h index 6044adbaf1..70794f3e70 100644 --- a/firmware/controllers/generated/signature_m74_9.h +++ b/firmware/controllers/generated/signature_m74_9.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3150936807 -#define TS_SIGNATURE "rusEFI master.2024.03.15.m74_9.3150936807" +#define SIGNATURE_HASH 4101068603 +#define TS_SIGNATURE "rusEFI master.2024.03.15.m74_9.4101068603" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index 7d32f43c17..3de71fe318 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 213523655 -#define TS_SIGNATURE "rusEFI master.2024.03.15.mre_f4.213523655" +#define SIGNATURE_HASH 1124348187 +#define TS_SIGNATURE "rusEFI master.2024.03.15.mre_f4.1124348187" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index 61b68942ef..d1071e511c 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 213523655 -#define TS_SIGNATURE "rusEFI master.2024.03.15.mre_f7.213523655" +#define SIGNATURE_HASH 1124348187 +#define TS_SIGNATURE "rusEFI master.2024.03.15.mre_f7.1124348187" diff --git a/firmware/controllers/generated/signature_nucleo_f413.h b/firmware/controllers/generated/signature_nucleo_f413.h index f057769cf4..a9fc6a13ed 100644 --- a/firmware/controllers/generated/signature_nucleo_f413.h +++ b/firmware/controllers/generated/signature_nucleo_f413.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 259342904 -#define TS_SIGNATURE "rusEFI master.2024.03.15.nucleo_f413.259342904" +#define SIGNATURE_HASH 1087074276 +#define TS_SIGNATURE "rusEFI master.2024.03.15.nucleo_f413.1087074276" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index 2ab09351b2..a7ce0949b9 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1071746984 -#define TS_SIGNATURE "rusEFI master.2024.03.15.prometheus_405.1071746984" +#define SIGNATURE_HASH 1885315700 +#define TS_SIGNATURE "rusEFI master.2024.03.15.prometheus_405.1885315700" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index 2e241a7820..c8c5687a98 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1071746984 -#define TS_SIGNATURE "rusEFI master.2024.03.15.prometheus_469.1071746984" +#define SIGNATURE_HASH 1885315700 +#define TS_SIGNATURE "rusEFI master.2024.03.15.prometheus_469.1885315700" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index 3887faef1b..3e3d722591 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3872564431 -#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_f4.3872564431" +#define SIGNATURE_HASH 2842462483 +#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_f4.2842462483" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index f7c9f3d7ad..24f35efb2e 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3872564431 -#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_f7.3872564431" +#define SIGNATURE_HASH 2842462483 +#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_f7.2842462483" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index 88baa11059..76e64fe040 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3872564431 -#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_h7.3872564431" +#define SIGNATURE_HASH 2842462483 +#define TS_SIGNATURE "rusEFI master.2024.03.15.proteus_h7.2842462483" diff --git a/firmware/controllers/generated/signature_s105.h b/firmware/controllers/generated/signature_s105.h index 7807d987a4..0ae9d6bca7 100644 --- a/firmware/controllers/generated/signature_s105.h +++ b/firmware/controllers/generated/signature_s105.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2969486074 -#define TS_SIGNATURE "rusEFI master.2024.03.15.s105.2969486074" +#define SIGNATURE_HASH 4282445606 +#define TS_SIGNATURE "rusEFI master.2024.03.15.s105.4282445606" diff --git a/firmware/controllers/generated/signature_small-can-board.h b/firmware/controllers/generated/signature_small-can-board.h index d913a63954..ae039f6bba 100644 --- a/firmware/controllers/generated/signature_small-can-board.h +++ b/firmware/controllers/generated/signature_small-can-board.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 836013745 -#define TS_SIGNATURE "rusEFI master.2024.03.15.small-can-board.836013745" +#define SIGNATURE_HASH 2120917869 +#define TS_SIGNATURE "rusEFI master.2024.03.15.small-can-board.2120917869" diff --git a/firmware/controllers/generated/signature_stm32f429_nucleo.h b/firmware/controllers/generated/signature_stm32f429_nucleo.h index 9c77763929..c7a244552a 100644 --- a/firmware/controllers/generated/signature_stm32f429_nucleo.h +++ b/firmware/controllers/generated/signature_stm32f429_nucleo.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 259342904 -#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32f429_nucleo.259342904" +#define SIGNATURE_HASH 1087074276 +#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32f429_nucleo.1087074276" diff --git a/firmware/controllers/generated/signature_stm32f767_nucleo.h b/firmware/controllers/generated/signature_stm32f767_nucleo.h index d697a320a0..efb41f62e3 100644 --- a/firmware/controllers/generated/signature_stm32f767_nucleo.h +++ b/firmware/controllers/generated/signature_stm32f767_nucleo.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 259342904 -#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32f767_nucleo.259342904" +#define SIGNATURE_HASH 1087074276 +#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32f767_nucleo.1087074276" diff --git a/firmware/controllers/generated/signature_stm32h743_nucleo.h b/firmware/controllers/generated/signature_stm32h743_nucleo.h index 887fcd71d9..56fbd8e404 100644 --- a/firmware/controllers/generated/signature_stm32h743_nucleo.h +++ b/firmware/controllers/generated/signature_stm32h743_nucleo.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 259342904 -#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32h743_nucleo.259342904" +#define SIGNATURE_HASH 1087074276 +#define TS_SIGNATURE "rusEFI master.2024.03.15.stm32h743_nucleo.1087074276" diff --git a/firmware/controllers/generated/signature_t-b-g.h b/firmware/controllers/generated/signature_t-b-g.h index c322f8e8b8..7cafcaa5b5 100644 --- a/firmware/controllers/generated/signature_t-b-g.h +++ b/firmware/controllers/generated/signature_t-b-g.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 259342904 -#define TS_SIGNATURE "rusEFI master.2024.03.15.t-b-g.259342904" +#define SIGNATURE_HASH 1087074276 +#define TS_SIGNATURE "rusEFI master.2024.03.15.t-b-g.1087074276" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index 6923b3b364..d0390eb99d 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2245750298 -#define TS_SIGNATURE "rusEFI master.2024.03.15.tdg-pdm8.2245750298" +#define SIGNATURE_HASH 3395634118 +#define TS_SIGNATURE "rusEFI master.2024.03.15.tdg-pdm8.3395634118" diff --git a/firmware/controllers/generated/signature_uaefi.h b/firmware/controllers/generated/signature_uaefi.h index 9a1d9a32fa..0948b85f43 100644 --- a/firmware/controllers/generated/signature_uaefi.h +++ b/firmware/controllers/generated/signature_uaefi.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1963933443 -#define TS_SIGNATURE "rusEFI master.2024.03.15.uaefi.1963933443" +#define SIGNATURE_HASH 984683231 +#define TS_SIGNATURE "rusEFI master.2024.03.15.uaefi.984683231" diff --git a/firmware/controllers/lua/generated/value_lookup_generated.md b/firmware/controllers/lua/generated/value_lookup_generated.md index d7063a6e93..76320faf90 100644 --- a/firmware/controllers/lua/generated/value_lookup_generated.md +++ b/firmware/controllers/lua/generated/value_lookup_generated.md @@ -698,7 +698,7 @@ null ### stft.maxIdleRegionRpm -Below this RPM, the idle region is active +Below this RPM, the idle region is active, idle+300 would be a good value ### stft.maxOverrunLoad Below this engine load, the overrun region is active @@ -1109,7 +1109,7 @@ VSS and auxSpeed1 or auxSpeed1 with auxSpeed2? ### afterCrankingIACtaperDuration -This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup. +This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better ### iacByTpsTaper IAC Value added when coasting and transitioning into idle. diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index a67d35de2f..7e3e37f5f8 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.f407-discovery.2871310681" + signature = "rusEFI master.2024.03.15.f407-discovery.3835335813" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.f407-discovery.2871310681" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.f407-discovery.3835335813" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:51 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:51:01 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index f05bc3343c..4fe38649e2 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.alphax-2chan.1642592406" + signature = "rusEFI master.2024.03.15.alphax-2chan.777639242" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.alphax-2chan.1642592406" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.alphax-2chan.777639242" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","INVALID","X1 - AIN1","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT","X3 - AIN2","X7 - AIN4" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:57 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:07 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index 12fede2f8f..b0b58b874e 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.alphax-4chan.2926296125" + signature = "rusEFI master.2024.03.15.alphax-4chan.3788870113" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.alphax-4chan.2926296125" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.alphax-4chan.3788870113" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","X7 - AIN4","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","INVALID","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:05 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:15 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini index 90129b0821..fff468dea4 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.alphax-4chan_f7.2926296125" + signature = "rusEFI master.2024.03.15.alphax-4chan_f7.3788870113" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.alphax-4chan_f7.2926296125" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.alphax-4chan_f7.3788870113" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","X7 - AIN4","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","INVALID","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:07 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:17 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini index 70318adc3c..5470fda59d 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.alphax-8chan-revA.1486801327" + signature = "rusEFI master.2024.03.15.alphax-8chan-revA.388031603" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.alphax-8chan-revA.1486801327" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.alphax-8chan-revA.388031603" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:58 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:08 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini index 17d9b86008..1b2068d5d2 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.alphax-8chan.567342916" + signature = "rusEFI master.2024.03.15.alphax-8chan.1852758680" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.alphax-8chan.567342916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.alphax-8chan.1852758680" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:53 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:03 UTC 2024 pageSize = 22444 page = 1 @@ -1881,7 +1881,7 @@ injectorStagingRpmBins = array, U16, 22430, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2009,7 +2009,7 @@ injectorStagingRpmBins = array, U16, 22430, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini index 71523f5130..f9e1fca21d 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.alphax-8chan_f7.567342916" + signature = "rusEFI master.2024.03.15.alphax-8chan_f7.1852758680" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.alphax-8chan_f7.567342916" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.alphax-8chan_f7.1852758680" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:55 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:06 UTC 2024 pageSize = 22444 page = 1 @@ -1881,7 +1881,7 @@ injectorStagingRpmBins = array, U16, 22430, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2009,7 +2009,7 @@ injectorStagingRpmBins = array, U16, 22430, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_at_start_f435.ini b/firmware/tunerstudio/generated/rusefi_at_start_f435.ini index a93ee39644..a03c8abea3 100644 --- a/firmware/tunerstudio/generated/rusefi_at_start_f435.ini +++ b/firmware/tunerstudio/generated/rusefi_at_start_f435.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.at_start_f435.259342904" + signature = "rusEFI master.2024.03.15.at_start_f435.1087074276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.at_start_f435.259342904" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.at_start_f435.1087074276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:39 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:49 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index bfad2e446a..b0097d9546 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.atlas.1265800822" + signature = "rusEFI master.2024.03.15.atlas.80526250" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.atlas.1265800822" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.atlas.80526250" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:30 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:40 UTC 2024 pageSize = 21928 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 21914, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 21914, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index 9bf3f10768..6a3429be1b 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.f407-discovery.2871310681" + signature = "rusEFI master.2024.03.15.f407-discovery.3835335813" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.f407-discovery.2871310681" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.f407-discovery.3835335813" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:46 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:56 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index 0a86529cf8..99594a4caf 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.f429-discovery.259342904" + signature = "rusEFI master.2024.03.15.f429-discovery.1087074276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.f429-discovery.259342904" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.f429-discovery.1087074276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:31 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:41 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_f469-discovery.ini b/firmware/tunerstudio/generated/rusefi_f469-discovery.ini index 574187ced2..83d1da6aae 100644 --- a/firmware/tunerstudio/generated/rusefi_f469-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f469-discovery.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.f469-discovery.1034044587" + signature = "rusEFI master.2024.03.15.f469-discovery.1914464631" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.f469-discovery.1034044587" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.f469-discovery.1914464631" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:33 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:43 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index b3cf4e2d87..db51a4f313 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.frankenso_na6.1509307939" + signature = "rusEFI master.2024.03.15.frankenso_na6.373824511" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.frankenso_na6.1509307939" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.frankenso_na6.373824511" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:29 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:39 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_haba208.ini b/firmware/tunerstudio/generated/rusefi_haba208.ini index 9dc8e07b73..a447d776e9 100644 --- a/firmware/tunerstudio/generated/rusefi_haba208.ini +++ b/firmware/tunerstudio/generated/rusefi_haba208.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.haba208.259342904" + signature = "rusEFI master.2024.03.15.haba208.1087074276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.haba208.259342904" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.haba208.1087074276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:08 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:18 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini index 6e2f8fe6fa..865216fdf3 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen-112-17.2256394940" + signature = "rusEFI master.2024.03.15.hellen-112-17.3385063264" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen-112-17.2256394940" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen-112-17.3385063264" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","B20 TPS Throttle Position 2","A14 Analog Input","INVALID","A21 PPS1","B03 TPS Throttle Position 1","INVALID","A07 TODO","A12 Analog Input","A10 Analog Input","INVALID","B19 MAP","A09 Analog Input","B15 CLT","B27 IAT","A11 Analog Input","A19 Analog Input" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:40 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:50 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index ff403aaaa7..7b1111e161 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen-gm-e67.3272353152" + signature = "rusEFI master.2024.03.15.hellen-gm-e67.2360477788" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen-gm-e67.3272353152" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen-gm-e67.2360477788" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:46 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:56 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini index ba08e5ec83..4bd7ac877e 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen-honda-k.752052793" + signature = "rusEFI master.2024.03.15.hellen-honda-k.1668106213" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen-honda-k.752052793" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen-honda-k.1668106213" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","A15 TPS","E9 Ignition Key Voltage","INVALID","Aux Analog 3","Aux Analog 1","INVALID","A19 - MAP","INVALID","B8 - CLT","B17 IAT","Aux Analog 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:43 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:53 UTC 2024 pageSize = 23100 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 23086, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 23086, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index d4147b7318..883b989bd0 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen-nb1.3865949208" + signature = "rusEFI master.2024.03.15.hellen-nb1.2849216964" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen-nb1.3865949208" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen-nb1.2849216964" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:00 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:10 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index 8ed21cc22b..0e45d24ec7 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen121nissan.584051759" + signature = "rusEFI master.2024.03.15.hellen121nissan.1836171763" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen121nissan.584051759" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen121nissan.1836171763" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:51 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:02 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index 875158069d..23e005b6ae 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen121vag.1057775582" + signature = "rusEFI master.2024.03.15.hellen121vag.1890742786" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen121vag.1057775582" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen121vag.1890742786" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:32 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:42 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen128.ini b/firmware/tunerstudio/generated/rusefi_hellen128.ini index 5355da1830..f3ada5a6a7 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen128.3806816463" + signature = "rusEFI master.2024.03.15.hellen128.2908308755" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen128.3806816463" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen128.2908308755" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:47 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:57 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index c77dea198c..fbe3a1ecb4 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen154hyundai.1662869749" + signature = "rusEFI master.2024.03.15.hellen154hyundai.748899625" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen154hyundai.1662869749" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen154hyundai.748899625" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:34 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:43 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai_f7.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai_f7.ini index 2d843242cc..dacb1c6c68 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen154hyundai_f7.1662869749" + signature = "rusEFI master.2024.03.15.hellen154hyundai_f7.748899625" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen154hyundai_f7.1662869749" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen154hyundai_f7.748899625" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:35 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:45 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index 8411d7e423..d0cafa09e3 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen72.2408887972" + signature = "rusEFI master.2024.03.15.hellen72.3224017784" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen72.2408887972" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen72.3224017784" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:01 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:11 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index 1c6aa00937..46ce26e6cc 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen81.1793446622" + signature = "rusEFI master.2024.03.15.hellen81.626786050" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen81.1793446622" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen81.626786050" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:39 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:49 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index 63d89758b5..2c367b5fbd 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellen88bmw.2110179229" + signature = "rusEFI master.2024.03.15.hellen88bmw.846785089" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellen88bmw.2110179229" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellen88bmw.846785089" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:36 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:46 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index 582da7c104..3da53ecdad 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellenNA6.2614141400" + signature = "rusEFI master.2024.03.15.hellenNA6.3564014596" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellenNA6.2614141400" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellenNA6.3564014596" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:49 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:59 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index 94453df567..ed1dcf8e7f 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.hellenNA8_96.1678435094" + signature = "rusEFI master.2024.03.15.hellenNA8_96.733269706" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.hellenNA8_96.1678435094" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.hellenNA8_96.733269706" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:31 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:49:41 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_m74_9.ini b/firmware/tunerstudio/generated/rusefi_m74_9.ini index 6bc3ee56e4..322e2163fa 100644 --- a/firmware/tunerstudio/generated/rusefi_m74_9.ini +++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.m74_9.3150936807" + signature = "rusEFI master.2024.03.15.m74_9.4101068603" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.m74_9.3150936807" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.m74_9.4101068603" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","MAF/MAP sensor signal","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","Pedal position sensor 1 signal PPS1","Pedal position sensor 2 signal PPS2","ETB TPS position sensor 1 signal","ETB TPS position sensor 2 signal" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:15 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:25 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index 72c9e979b3..de4c1a5593 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.mre_f4.213523655" + signature = "rusEFI master.2024.03.15.mre_f4.1124348187" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.mre_f4.213523655" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.mre_f4.1124348187" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:09 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:19 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index fee1cd1463..4b334ca44b 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.mre_f7.213523655" + signature = "rusEFI master.2024.03.15.mre_f7.1124348187" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.mre_f7.213523655" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.mre_f7.1124348187" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:11 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:21 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_f413.ini b/firmware/tunerstudio/generated/rusefi_nucleo_f413.ini index b0504496cd..74dd1b6a4c 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_f413.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_f413.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.nucleo_f413.259342904" + signature = "rusEFI master.2024.03.15.nucleo_f413.1087074276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.nucleo_f413.259342904" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.nucleo_f413.1087074276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:34 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:44 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index 063becc0db..da97279518 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.prometheus_405.1071746984" + signature = "rusEFI master.2024.03.15.prometheus_405.1885315700" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.prometheus_405.1071746984" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.prometheus_405.1885315700" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:42 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:52 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index 68e2b1c392..820030fbd9 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.prometheus_469.1071746984" + signature = "rusEFI master.2024.03.15.prometheus_469.1885315700" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.prometheus_469.1071746984" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.prometheus_469.1885315700" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:43 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:53 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index 025ca466b2..dafddea5a8 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.proteus_f4.3872564431" + signature = "rusEFI master.2024.03.15.proteus_f4.2842462483" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.proteus_f4.3872564431" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.proteus_f4.2842462483" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:16 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:26 UTC 2024 pageSize = 26428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 26414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 26414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index 43ee8186ec..a5fca7fab4 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.proteus_f7.3872564431" + signature = "rusEFI master.2024.03.15.proteus_f7.2842462483" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.proteus_f7.3872564431" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.proteus_f7.2842462483" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:17 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:28 UTC 2024 pageSize = 26428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 26414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 26414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index b10d606fdb..59a29c8642 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.proteus_h7.3872564431" + signature = "rusEFI master.2024.03.15.proteus_h7.2842462483" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.proteus_h7.3872564431" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.proteus_h7.2842462483" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:19 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:29 UTC 2024 pageSize = 26428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 26414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 26414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_s105.ini b/firmware/tunerstudio/generated/rusefi_s105.ini index 57df0705ab..69e3f0abd7 100644 --- a/firmware/tunerstudio/generated/rusefi_s105.ini +++ b/firmware/tunerstudio/generated/rusefi_s105.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.s105.2969486074" + signature = "rusEFI master.2024.03.15.s105.4282445606" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.s105.2969486074" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.s105.4282445606" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:13 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:23 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_small-can-board.ini b/firmware/tunerstudio/generated/rusefi_small-can-board.ini index cbdae6d281..3a6ece39f0 100644 --- a/firmware/tunerstudio/generated/rusefi_small-can-board.ini +++ b/firmware/tunerstudio/generated/rusefi_small-can-board.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.small-can-board.836013745" + signature = "rusEFI master.2024.03.15.small-can-board.2120917869" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.small-can-board.836013745" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.small-can-board.2120917869" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","B2 - Analog/Digital Input","B3 - Analog/Digital Input","B4 - Analog/Digital Input","B5 - Analog/Digital Input","B7 - Analog/Digital Input","C1 - Analog/Digital Input 6","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","C2 - Analog/Digital Input 7","C4 - Analog/Digital Input 8" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:02 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:13 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_stm32f429_nucleo.ini b/firmware/tunerstudio/generated/rusefi_stm32f429_nucleo.ini index abb0259184..b5d7db427c 100644 --- a/firmware/tunerstudio/generated/rusefi_stm32f429_nucleo.ini +++ b/firmware/tunerstudio/generated/rusefi_stm32f429_nucleo.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.stm32f429_nucleo.259342904" + signature = "rusEFI master.2024.03.15.stm32f429_nucleo.1087074276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.stm32f429_nucleo.259342904" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.stm32f429_nucleo.1087074276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:12 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:22 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_stm32f767_nucleo.ini b/firmware/tunerstudio/generated/rusefi_stm32f767_nucleo.ini index fd73ce0f9c..e7b41f7d14 100644 --- a/firmware/tunerstudio/generated/rusefi_stm32f767_nucleo.ini +++ b/firmware/tunerstudio/generated/rusefi_stm32f767_nucleo.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.stm32f767_nucleo.259342904" + signature = "rusEFI master.2024.03.15.stm32f767_nucleo.1087074276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.stm32f767_nucleo.259342904" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.stm32f767_nucleo.1087074276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:35 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:45 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_stm32h743_nucleo.ini b/firmware/tunerstudio/generated/rusefi_stm32h743_nucleo.ini index d0a7469bdc..0fc3910bc1 100644 --- a/firmware/tunerstudio/generated/rusefi_stm32h743_nucleo.ini +++ b/firmware/tunerstudio/generated/rusefi_stm32h743_nucleo.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.stm32h743_nucleo.259342904" + signature = "rusEFI master.2024.03.15.stm32h743_nucleo.1087074276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.stm32h743_nucleo.259342904" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.stm32h743_nucleo.1087074276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:41 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:50 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_t-b-g.ini b/firmware/tunerstudio/generated/rusefi_t-b-g.ini index aeb524b7c2..6527c22371 100644 --- a/firmware/tunerstudio/generated/rusefi_t-b-g.ini +++ b/firmware/tunerstudio/generated/rusefi_t-b-g.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.t-b-g.259342904" + signature = "rusEFI master.2024.03.15.t-b-g.1087074276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.t-b-g.259342904" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.t-b-g.1087074276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:44 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:54 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index a4c1508d63..2cb8b50f61 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.tdg-pdm8.2245750298" + signature = "rusEFI master.2024.03.15.tdg-pdm8.3395634118" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.tdg-pdm8.2245750298" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.tdg-pdm8.3395634118" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:48 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:58 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/firmware/tunerstudio/generated/rusefi_uaefi.ini b/firmware/tunerstudio/generated/rusefi_uaefi.ini index a2cfa15a43..322b70d454 100644 --- a/firmware/tunerstudio/generated/rusefi_uaefi.ini +++ b/firmware/tunerstudio/generated/rusefi_uaefi.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.03.15.uaefi.1963933443" + signature = "rusEFI master.2024.03.15.uaefi.984683231" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.03.15.uaefi.1963933443" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.03.15.uaefi.984683231" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -99,7 +99,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","D1 AUX1","C3 AUX2","INVALID","D6 PPS1","D13 TPS1","A7 Voltage From Key","INVALID","C15 Fuel Pressure / AUX3","C14 TPS2","INVALID","D9 MAP","On-board MAP","D16 CLT Coolant","D15 IAT","C4 PPS2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:12:50 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:50:00 UTC 2024 pageSize = 22428 page = 1 @@ -1878,7 +1878,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 launchSparkSkipPercent = "Spark Skip Transition Target" launchBoostDuty = "Duty Cycle for the Boost Solenoid" hardCutRpmRange = "Range from Launch RPM to activate Hard Cut" - stft_maxIdleRegionRpm = "Below this RPM, the idle region is active" + stft_maxIdleRegionRpm = "Below this RPM, the idle region is active, idle+300 would be a good value" stft_maxOverrunLoad = "Below this engine load, the overrun region is active" stft_minPowerLoad = "Above this engine load, the power region is active" stft_deadband = "When close to correct AFR, pause correction. This can improve stability by not changing the adjustment if the error is extremely small, but is not required." @@ -2006,7 +2006,7 @@ injectorStagingRpmBins = array, U16, 22414, [6], "RPM", 1, 0, 0, 18000, 0 targetVBatt = "This is the target battery voltage the alternator PID control will attempt to maintain" mc33810DisableRecoveryMode = "See Over/Undervoltage Shutdown/Retry bit in documentation" useVssAsSecondWheelSpeed = "VSS and auxSpeed1 or auxSpeed1 with auxSpeed2?" - afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup." + afterCrankingIACtaperDuration = "This is the duration in cycles that the IAC will take to reach its normal idle position, it can be used to hold the idle higher for a few seconds after cranking to improve startup.\Should be 100 once tune is better" iacByTpsTaper = "IAC Value added when coasting and transitioning into idle." auxSerialTxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" auxSerialRxPin = "Auxiliary sensor serial, not to be confused with secondary calibration serial" diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index a7fc2bd7f0..6749297385 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 03:13:51 UTC 2024 +// this file was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Fri Mar 15 16:51:01 UTC 2024 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -1374,7 +1374,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI master.2024.03.15.f407-discovery.2871310681"; + public static final String TS_SIGNATURE = "rusEFI master.2024.03.15.f407-discovery.3835335813"; public static final char TS_SIMULATE_CAN = '>'; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't';