#
# todo: what's the deal with dual mode A/C switch?
# todo: what's the deal with dual mode Power Steering Switch? and a few others?
#

pins:
  - pin: 2A
# INJ1 Q312
    id: G7
    class: outputs
    ts_name: 2A - INJ_1
    function: Injector #1
    type: inj
    color: orange Y1

  - pin: 2B
    id: D12
    class: outputs
    ts_name: 2B - ECF (PWM8)
    function: Engine Radiator Fan
    color: orange B4
    type: ls

  - pin: 2C
    id: D9
    class: outputs
    ts_name: 2C - AC Fan / INJ_5
    function: AC Radiator fan
    type: inj

  - pin: 2D
#INJ2 Q305
    id: G8
    class: outputs
    ts_name: 2D - INJ_2
    function: Injector #2
    type: inj
    color: blue Y1

 #- pin: 2E
 #  id: C7 
 #  class: outputs
 #  ts_name: 2E - COIL_A2 (PWM2)
 #  function: EGR Valve #1 Coil
 #  type: ls

 # - pin: 2F
 #  id: C6
 #  class: outputs
 #  ts_name: 2E - COIL_A1 (PWM1)
 #  function: EGR Valve #2 Coil
 #  type: ls

  - pin: 2G
#INJ3 Q309
    id: D11
    class: outputs
    ts_name: 2G - INJ_3
    function: Injector #3
    type: inj
    color: white Y1

#  - pin: 2H
    #    id: C9
    #    class: outputs
    #  ts_name: 2H - COIL_B2 (PWM4)
    #  function: EGR Valve #3 Coil
  #  type: ls

 # - pin: 2I
 #  id: C8
  # class: outputs
  # ts_name: 2I - COIL_B1 (PWM3)
  # function: EGR Valve #4 Coil
 # type: ls

  - pin: 2J
#INJ4 Q310
    id: D10
    class: outputs
    ts_name: 2J - INJ_4
    function: Injector #4
    type: inj
    color: green Y1

  - pin: 2K
    id: H15
    class: outputs
    ts_name: 2K - AC (O4)
    function: A/C Relay
    type: ls

  - pin: 2M
    id: G2
    class: outputs
    ts_name: 2M - FPUMP (O9)
    function: Fuel Pump Relay
    type: ls
    color: red B4

  - pin: 2N
    id: F12
    class: outputs
    ts_name: 2N - VTSC / INJ_6
    function: VTCS Control
    type: inj

  - pin: 2O
    id: E4
    class: outputs
    ts_name: 2O - IGN_3
    type: ign

  - pin: 2P
    function: IAC (positive) idle, +12v wired to main relay via 4AF
    color: red, short wire

  - pin: 2Q
    id: D14
    class: outputs
    ts_name: 2Q - IDLE (PWM5)
    function: IAC (negative) idle, with diode
    type: ls
    color: blue B4

  - pin: 2R
    id: G4
    class: outputs
    ts_name: 2R - CE (O11)
    function: MIL Control
    type: ls
    color: white Y1

  - pin: 3A
    function: Injector GND
    type: gnd
    color: black Y1

  - pin: 3B
    function: PCM (ECU) GND
    type: gnd
    color: black W4, sliced for MAP

  - pin: 3C
    id: F13
    class: outputs
    ts_name: 3C - Purge Solenoid / INJ_7
    function: Purge Control Solenoid
    type: inj

  - pin: 3D
    id: F14
    class: outputs
    ts_name: 3D - EGR Solenoid / INJ_8
    function: EGR Boost sens. sol.
    type: inj

  - pin: 3E
    id: G3
    class: outputs
    ts_name: 3E - CANIST (O10)
    function: CDCV (EVAP canister purge valve) Control
    type: ls

  - pin: 3F
    id: I8
    class: outputs
    ts_name: 3F - IGN_1 (1&4)
    function: Coil #1
    type: ign
    color: white B4

  - pin: 3H
    id: I2
    class: outputs
    ts_name: 3H - MAIN (O1)
    function: Main relay control
    type: ls
    color: white or red, R5

  - pin: 3I
    id: E5
    class: outputs
    ts_name: 3I - IGN_2 (2&3)
    function: Coil #2
    type: ign
    color: orange B4

  - pin: 3J
    id: H14
    class: outputs
    ts_name: 3J - O2H (O3)
    function: Front O2 sens. heater GND
    type: ls

  - pin: 3K
    function: NC

  - pin: 3L
    id: [I6, EFI_ADC_1]
    class: [outputs, analog_inputs]
    ts_name: 3L - IGN_7 / AFR
    type: ign

  - pin: 3M
    id: D15
    class: outputs
    ts_name: 3M - ALTERN (PWM6)
    function: PWM signal to control alternator field voltage
    type: ls
    color: orange R5

  - pin: 3N
    id: E3
    class: outputs
    ts_name: 3N - IGN_4
    type: ign

  - pin: 3O
    id: D13
    class: outputs
    ts_name: 3O - TACH (PWM7)
    function: Tach Out
    type: ls
    color: green B4

  - pin: 3P
    id: A9
    class: outputs
    ts_name: 3P - O2H2 (O7)
    function: Rear O2 sensor heater
    type: ls

  - pin: 3Q
    function: K-Line (serial comm.)

  - pin: 3S
    function: Immobilizer comm.

  - pin: 3T
# H144_IN_VSS
    id: F11
    class: event_inputs
    ts_name: 3T - VSS (D5)
    function: VSS in
    color: blue W3

  - pin: 3U
    id: H13
    class: outputs
    ts_name: 3U - AWARN (O2)
    function: Alternator Warning Light
    type: ls

  - pin: 3V
    id: [A6, EFI_ADC_6]
    class: [event_inputs, analog_inputs]
    ts_name: 3V - CAM (A19)
    function: Camshaft Sensor
    color: blue W3

  - pin: 3W
    function: NC

  - pin: 3X
    function: NC

  - pin: 3Y
    id: [B1, EFI_ADC_9]
    class: [event_inputs, analog_inputs]
    ts_name: 3Y - CRANK (A24)
    function: Crankshaft Sensor
    color: white W3

  - pin: 3Z
    id: E2
    class: outputs
    ts_name: 3Z - IGN_5 / GNDA
    type: ign

  - pin: 4A
    function: Ground
    type: gnd
    color: black W4

  - pin: 4B
    id: [F9]
    class: [switch_inputs]
    ts_name: 4B - Brake/RES1 (A7)
    function: Brake Switch

  - pin: 4C    
    function: Power Steering Switch

  - pin: 4D
    function: VVT Oil Control Valve pos. +12v wired to main relay via 4AF, short wire

  - pin: 4E
    function: DTM switching (Diagnostic Terminal?)

  - pin: 4F
    id: [B0, EFI_ADC_8]
    class: [switch_inputs, analog_inputs]
    ts_name: 4F - AC_PRES/AUX1 (A23)
    function: A/C Pressure In

  - pin: 4H
    id: E14
    class: event_inputs
    ts_name: 4H - Neutral
    function: Neutral Switch

  - pin: 4I_rev_D
  # H176_IN_RES3 
    id: F8
    class: switch_inputs
    ts_name: 4I - Clutch rev D
    function: Clutch Switch
    
  - pin: 4I
  # H176_IN_D1 
    id: E13
    class: switch_inputs
    ts_name: 4I - Clutch rev E/F
    function: Clutch Switch

  - pin: 4J
    id: [A7, EFI_ADC_7]
    class: [switch_inputs, analog_inputs]
    ts_name: 4J - VTCS/AUX4 (A20)
    function: VTCS ca. switch

  - pin: 4K
    id: I5
    class: outputs
    ts_name: 4K - IGN_6 / +5V_MAP
    type: ign

  - pin: 4L
    function: Sensor +5V
    color: red W3, sliced for MAP

# EFI_ADC_5 same as VBATTT
# channel 5 on ADC1/2 is VBATT, and channel 5 on ADC3 is knock
# knock configuration is hard-coded at the moment, we only use this entry for interactive pinout
  - pin: 4M
#    id: EFI_ADC_5
#    class: analog_inputs
#    ts_name: 4M - KNOCK (A6)
    function: Knock sens. in
    color: white R5

  - pin: 4N
    id: EFI_ADC_13
    class: analog_inputs
    ts_name: 4N - IAT (A14)
    function: IAT sensor
    color: green B2

  - pin: 4O
    function: Sensor GND
    type: gnd
    color: black B2

  - pin: 4P
    id: EFI_ADC_12
    class: analog_inputs
    ts_name: 4P - CLT (A11)
    function: CLT sensor
    color: blue B2

  - pin: 4Q
    function: NC

  - pin: 4R
    id: I0
    class: outputs
    ts_name: 4R - VVT (O5)
    function: VVT Oil Control Valve neg.
    type: ls
    color: white B2

# on one hand we need unique TS name for pin
# on another hand we need clarity for interactive pinout

  - pin: 4S_4T
    # this entry for TS
    # todo: mention is this one is 2002 or 2003 vbatt sensor input here
    id: EFI_ADC_5
    class: analog_inputs
    ts_name: 4S/4T - Alternator voltage

  - pin: 4S
    # this entry for interactive pinout
    # todo: mention is this one is 2002 or 2003 vbatt sensor input here
    function: +12V engine fuse 15A, ECU power source, run/start
    color: red B2

  - pin: 4T
    # this entry for interactive pinout
    # todo: mention is this one is 2002 or 2003 vbatt sensor input here
    function: Alternator output voltage

  - pin: 4U
    id: [I7, EFI_ADC_11]
    class: [outputs, analog_inputs]
    ts_name: 4U - MAP2/Ign8 (A10)
    function: NC, extra main relay for diode
    color: red, short wire
    type: ign

  - pin: int_map
    id: EFI_ADC_2
    class: analog_inputs
    ts_name: intMAP (A15)

  - pin: 4V
    id: EFI_ADC_4
    class: analog_inputs
    ts_name: 4V - TPS (A17)
    function: TPS sensor input
    color: green B2

#  - pin: 4W
 #   id: EFI_ADC_0
#    class: analog_inputs
 #   ts_name: 4W - O2S (A13)
#    function: Front O2 Sensor Signal

  - pin: 4X
    id: EFI_ADC_10
    class: analog_inputs
    ts_name: 4X - MAF (A9)
    function: MAF sensor
    color: orange B2

  - pin: 4Z
    function: ECU - TCM, Communication for A/T

  - pin: 4AA
# huh?   id: EFI_ADC_9
# huh?    class: analog_inputs
# huh?    ts_name: 4AA - O2S2 (A12)
    function: Rear O2 Sensor Signal

  - pin: 4AB   
    function: Fuel Tank Pressure Sensor, PPS

  - pin: 4AC
    function: ECU - TCM, Communication for A/T

  - pin: 4AD
    # huh?  id: EFI_ADC_14
    # huh?   class: analog_inputs
    # huh?   ts_name: 4AD - FUEL_LEVEL (A21)
    function: Fuel Level Sensor

  - pin: 4AE
    id: EFI_ADC_15
    class: analog_inputs
    ts_name: 4AE - EGR/MAP4 (A22)
    function: EGR Boost Pressure Sensor

  - pin: 4AF
    function: +12v from main relay

  - pin: 4AG
    function: Bat+ (Hot all times), 12v 10A fuse from battery

  - pin: 4AH
    function: Evap
    
  - pin: 5A     
    id: [C0]
    class: [switch_inputs]
    ts_name: 5A - Pressure Input
    function: in_map1

#  - pin: 5B
    #    id: F8
    #  class: switch_inputs
    #   ts_name: 5B - IN RES3
    #  function: options port in_res3
    
  - pin: 5C    
    id: E15
    class: event_inputs
    ts_name: 5C - Digital Input
    function: digital

  - pin: 5D    
    id: F5
    class: switch_inputs
    ts_name: 5D - SENSOR INPUT
    function: Optional sensor input
   
  - pin: 5E
    id: C9
    class: outputs
    ts_name: 5E - SOLENOID OUTPUT
    function: Output

 # - pin: 5F
 #   id: H13
 #   class: outputs
 #   ts_name: 5F - HIGHSIDE OUTPUT
 #   function: high output
    
  - pin: 5H     
    function: GND

  - pin: 5I
    id: E12
    class: event_inputs
    ts_name: 5I - Digital Input
    function: digital
    
  - pin: 5J
        
#  - pin: 5K
#    id: F14
 #   class: outputs
 #   ts_name: 5K - BOOST OUT
 #   function: BOOST OUT
#    type: inj
  
  - pin: 5L
    function: +5v
  
  - pin: 5M
    id: [C4, EFI_ADC_14]
    class: [switch_inputs, analog_inputs]
    ts_name: 5M - PPS2 OR TEMPERATURE SENSOR
    function: PPS
    
  - pin: 5N 
    id: [A0, EFI_ADC_0]
    class: [switch_inputs, analog_inputs]
    ts_name: 5N - TPS2
    function: TPS

  - pin: 5O    
    function: TPS
    
  - pin: 5P
    id: [A3, EFI_ADC_3]
    class: [switch_inputs, analog_inputs]
    ts_name: 5P - PPS1   
    
  - pin: 5R     
    function: +5V

  - pin: 5S    
    function: +5v
    
  - pin: 5T    
    function: GND

  - pin: 5U    
    function: GND
   
  - pin: 5V     
    function: +12V

  - pin: 5W    
    function: +12V
    
  - pin: 5X     
    function: GND

  - pin: 5Z    
    Function: WBO_Vs/Ip
    
  - pin: 5AA    
    function: WBO_Vs
    
  - pin: 5AB     
    function: WBO_R_TRIM
  
  - pin: 5AC    
    function: WBO_Ip
  
  - pin: 5AD
    function: WBO_H- 
    
  - pin: 5AE
    function: WBO_H+
    
  - pin: int_etb+
    id: C7
    class: outputs
    ts_name: ETB +
    
  - pin: int_etb-
    id: C8
    class: outputs
    ts_name: ETB -
    
  - pin: int_etb_EN
    id: C6
    class: outputs
    ts_name: ETB EN  


info:
  title: Hellen Miata NB2
  directory: hellen/hellen72
  image:
    file: main.jpg
  pins:
    - pin: 2A
      x: 2259
      y: 220
    - pin: 2D
      x: 2187
      y: 220
    - pin: 2G
      x: 2115
      y: 220
    - pin: 2J
      x: 2043
      y: 220
    - pin: 2M
      x: 1971
      y: 220
    - pin: 2P
      x: 1899
      y: 220
    - pin: 3A
      x: 1722
      y: 220
    - pin: 3D
      x: 1643
      y: 220
    - pin: 3J
      x: 1490
      y: 220
    - pin: 3M
      x: 1398
      y: 220
    - pin: 3P
      x: 1309
      y: 220
    - pin: 3U
      x: 1212
      y: 220
    - pin: 3X
      x: 1131
      y: 220
    - pin: 4A
      x: 965
      y: 220
    - pin: 4D
      x: 876
      y: 220
    - pin: 4L
      x: 710
      y: 220
    - pin: 4O
      x: 618
      y: 220
    - pin: 4R
      x: 531
      y: 220
    - pin: 4U
      x: 434
      y: 220
    - pin: 4Z
      x: 352
      y: 220
    - pin: 4AC
      x: 257
      y: 220
    - pin: 4AF
      x: 166
      y: 220
    - pin: 2B
      x: 2261
      y: 350
    - pin: 2E
      x: 2193
      y: 350
    - pin: 2H
      x: 2116
      y: 350
    - pin: 2K
      x: 2044
      y: 350
    - pin: 2N
      x: 1968
      y: 350
    - pin: 2Q
      x: 1905
      y: 350
    - pin: 3B
      x: 1726
      y: 350
    - pin: 3E
      x: 1644
      y: 350
    - pin: 3H
      x: 1572
      y: 350
    - pin: 3K
      x: 1498
      y: 350
    - pin: 3N
      x: 1423
      y: 350
    - pin: 3Q
      x: 1356
      y: 350
    - pin: 3S
      x: 1281
      y: 350
    - pin: 3V
      x: 1206
      y: 350
    - pin: 3Y
      x: 1132
      y: 350
    - pin: 4B
      x: 976
      y: 350
    - pin: 4E
      x: 904
      y: 350
    - pin: 4H
      x: 829
      y: 350
    - pin: 4J
      x: 758
      y: 350
    - pin: 4M
      x: 685
      y: 350
    - pin: 4P
      x: 616
      y: 350
    - pin: 4S
      x: 536
      y: 350
    - pin: 4V
      x: 463
      y: 350
    - pin: 4X
      x: 398
      y: 350
    - pin: 4AA
      x: 321
      y: 350
    - pin: 4AD
      x: 254
      y: 350
    - pin: 4AG
      x: 174
      y: 350
    - pin: 2C
      x: 2263
      y: 486
    - pin: 2F
      x: 2189
      y: 486
    - pin: 2I
      x: 2114
      y: 486
    - pin: 2O
      x: 1973
      y: 486
    - pin: 2R
      x: 1895
      y: 486
    - pin: 3C
      x: 1726
      y: 486
    - pin: 3F
      x: 1640
      y: 486
    - pin: 3I
      x: 1568
      y: 486
    - pin: 3L
      x: 1494
      y: 486
    - pin: 3O
      x: 1421
      y: 486
    - pin: 3T
      x: 1277
      y: 486
    - pin: 3W
      x: 1203
      y: 486
    - pin: 3Z
      x: 1129
      y: 486
    - pin: 4C
      x: 974
      y: 486
    - pin: 4F
      x: 900
      y: 486
    - pin: 4I
      x: 828
      y: 486
    - pin: 4K
      x: 760
      y: 486
    - pin: 4N
      x: 682
      y: 486
    - pin: 4T
      x: 535
      y: 486
    - pin: 4W
      x: 467
      y: 486
    - pin: 4AB
      x: 314
      y: 486
    - pin: 4AE
      x: 247
      y: 486
    - pin: 4AH
      x: 169
      y: 486