mirror of https://github.com/rusefi/rusefi.git
26 lines
1.4 KiB
Plaintext
26 lines
1.4 KiB
Plaintext
! "units",scale,offset, min,max, digits,category
|
|
|
|
struct_no_prefix ignition_state_s
|
|
float baseDwell;"Ignition: base dwell";"ms", 1,0, 0,30, 1,@@GAUGE_CATEGORY_TIMING@@
|
|
floatms_t sparkDwell;@@GAUGE_COIL_DWELL_TIME@@;"ms", 1,0, 0,30, 1,@@GAUGE_CATEGORY_TIMING@@
|
|
|
|
angle_t dwellDurationAngle;Ignition: dwell duration\nas crankshaft angle\nNAN if engine is stopped\nSee also sparkDwell;"deg", 1,0, 0,120, 1,@@GAUGE_CATEGORY_TIMING@@
|
|
|
|
int16_t autoscale cltTimingCorrection;Ign: CLT correction;"deg",{1/@@PACK_MULT_PERCENT@@},0, -20,20, 2,@@GAUGE_CATEGORY_TIMING@@
|
|
int16_t autoscale timingIatCorrection;Ign: IAT correction;"deg",{1/@@PACK_MULT_PERCENT@@},0, -20,20, 2,@@GAUGE_CATEGORY_TIMING@@
|
|
int16_t autoscale timingPidCorrection;Idle: Timing adjustment;"deg",{1/@@PACK_MULT_PERCENT@@},0, -20,20, 2,@@GAUGE_CATEGORY_TIMING@@
|
|
|
|
int16_t autoscale baseIgnitionAdvance;@@GAUGE_NAME_TIMING_ADVANCE@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 1
|
|
int16_t autoscale correctedIgnitionAdvance;@@GAUGE_NAME_ADJUSTED_TIMING@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 1
|
|
|
|
int16_t autoscale tractionAdvanceDrop;Traction: timing correction;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 1
|
|
|
|
float dwellVoltageCorrection;Ign: Dwell voltage correction
|
|
|
|
float luaTimingAdd;Ign: Lua timing add;"deg",1, 0, -20, 20, 2, @@GAUGE_CATEGORY_TIMING@@
|
|
float luaTimingMult;Ign: Lua timing mult;"deg",1, 0, -20, 20, 2, @@GAUGE_CATEGORY_TIMING@@
|
|
bit luaIgnitionSkip;Ign: Lua Spark Skip
|
|
|
|
end_struct
|
|
|