2019-07-13 12:48:16 -07:00
# While you wait for your hardware #
2019-07-13 14:06:32 -07:00
1. [Download rusEfi bundle ](Download ) for your hardware.
2019-07-13 12:48:16 -07:00
2019-07-13 14:06:32 -07:00
1. Uncompress bundle, launch rusEfi console and hit "Install Drivers" button to install Virtual Com Port and ST-Link drivers. If necessary bundle would help you install java run-time.
2019-07-13 14:03:23 -07:00
2019-07-13 14:06:32 -07:00
![console ](FAQ/images/rusEfi_console/rusEfi_console_start_screen.png )
2019-07-13 14:07:20 -07:00
3. Download and install [FTDI's usb VCP driver on your PC ](http://www.ftdichip.com/Drivers/VCP.htm ) - that's if you have a Frankenso or Frankenstein board with FT232 chip
2019-07-13 14:08:01 -07:00
4. Get friendly on the [rusEFI forums ](https://rusefi.com/forum )
2019-07-13 15:30:43 -07:00
5. [Install TunerStudio (version 3.0.24 or newer is needed) ](http://www.tunerstudio.com/index.php/downloads )
2019-07-13 18:37:43 -07:00
6. Start a new project, save to a folder you specify, and choose the rusefi.ini file from the bundle.
2019-07-13 15:30:43 -07:00
2019-07-26 08:18:55 -07:00
![project ](FAQ/images/TunerStudio_new_project.png )
# FAQ
Q: How do I change settings? Would I need to compile source code?
A: No, majority of users use rusEfi bundle to get firmware and TunerStudio to change any settings they would need to change.
Q: Low side, high side... Too complicated! Where do I hook my coils?!
A: There is some variation between vehicles and components. Please use [rusEFI forums ](https://rusefi.com/forum ) for custom installation help!