2020-02-17 06:48:32 -08:00
|
|
|
## HOWTO microRusEfi Kit
|
|
|
|
|
|
|
|
|
|
|
|
[mircoRusEfi kit](https://www.ebay.com/itm/333517397424) comes 75% assembled - while many components are already mounted, about two dozens
|
|
|
|
still need to be added. This includes both easy to mount components like main connector and harder to solder
|
|
|
|
TLE8888 100-pin chip. Some soldering hints and tricks [are discussed here](https://rusefi.com/forum/viewtopic.php?t=425).
|
|
|
|
If in double of your SMD skills please consider fully assembled version.
|
|
|
|
|
|
|
|
|
|
|
|
For component placement [please use interactive BOM](https://rusefi.com/docs/ibom/microRusEfi_R0.4.7.html).
|
|
|
|
|
|
|
|
All microRusEfi kits use [MRE F4 rusEfi firmware - DOWNLOAD LATEST BUNDLE HERE](https://rusefi.com/build_server/rusefi_bundle_mre-f4.zip)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[Wiring Diagram](Hardware_microRusEfi_wiring)
|
|
|
|
|
|
|
|
[0.4.7 schematics PDF](https://github.com/rusefi/hw_microRusEfi/blob/master/microRusEfi_Schematic_0_4_7.pdf)
|
|
|
|
|
|
|
|
|
2020-02-17 07:01:51 -08:00
|
|
|
[rusEfi Slack channel](https://rusefi.com/forum/viewtopic.php?f=13&t=1198) is the primary support channel.
|
|
|
|
|
2020-02-22 13:41:46 -08:00
|
|
|
[HOWTO program rusEfi using DFU](https://www.youtube.com/watch?v=VdvXYgv_acg)
|
2020-02-17 06:48:32 -08:00
|
|
|
|
2020-02-22 13:41:46 -08:00
|
|
|
# Crankshaft position sensor options: Hall or VR
|
2020-02-17 07:01:51 -08:00
|
|
|
|
2020-02-22 13:41:46 -08:00
|
|
|
Depending on your crankshaft position sensor type you would need to populate either Hall or VR option.
|
2020-02-17 07:01:51 -08:00
|
|
|
|
2020-03-16 12:29:10 -07:00
|
|
|
0.4.5, 0.4.7: For VR crankshaft position sensor you would need to add R9 & C12 on the back.
|
|
|
|
|
|
|
|
0.4.8: Comes set for VR (R9 & C12 are now on the front since)
|
|
|
|
|
2020-02-22 13:41:46 -08:00
|
|
|
VR mode front - comes pre-assembled
|
|
|
|
![Back](Hardware/microrusefi/Hardware_microRusEfi_0.4.7_vr_front.png)
|
2020-02-17 11:33:28 -08:00
|
|
|
|
2020-02-22 13:41:46 -08:00
|
|
|
VR mode back
|
|
|
|
![Back](Hardware/microrusefi/Hardware_microRusEfi_0.4.7_vr_back.jpg)
|
2020-02-17 11:33:28 -08:00
|
|
|
|
2020-02-22 13:41:46 -08:00
|
|
|
|
2020-03-16 12:29:10 -07:00
|
|
|
0.4.5, 0.4.7: For Hall, you would need to REMOVE R15 & C35 on the front, and install R17 R18 R19 on the back.
|
|
|
|
|
|
|
|
0.4.8: For Hall, you would need to REMOVE R15&R9, C12 & C35 on the front, and install R17 R18 R19 on the back.
|
2020-02-22 11:09:08 -08:00
|
|
|
|
|
|
|
Hall mode front
|
|
|
|
![Front](Hardware/microrusefi/Hardware_microRusEfi_0.4.7_hall_front.jpg)
|
|
|
|
|
|
|
|
Hall mode back
|
2020-02-22 13:41:46 -08:00
|
|
|
![Back](Hardware/microrusefi/Hardware_microRusEfi_0.4.7_hall_back.png)
|
2020-02-22 11:09:08 -08:00
|
|
|
|
2020-02-22 13:41:46 -08:00
|
|
|
|
|
|
|
|
|
|
|
# Board Photos
|
|
|
|
|
|
|
|
Kit front:
|
|
|
|
|
|
|
|
![Front](Hardware/microrusefi/Hardware_microRusEfi_0.4.7_pre_assembled_front.jpg)
|
|
|
|
|
|
|
|
Kit parts on the front:
|
|
|
|
|
|
|
|
![Front](Hardware/microrusefi/Hardware_microRusEfi_0.4.7_kit_front.jpg)
|
|
|
|
|
|
|
|
Kit parts on the back:
|
|
|
|
![Back](Hardware/microrusefi/Hardware_microRusEfi_0.4.7_kit_assembled_back.jpg)
|
|
|
|
|
|
|
|
Flyback diodes orientation
|
|
|
|
![Back](Hardware/microrusefi/Hardware_microRusEfi_0.4.7_kit_diodes_orientation.jpg)
|
2020-02-22 11:09:08 -08:00
|
|
|
|
2020-03-18 13:59:50 -07:00
|
|
|
|
|
|
|
# Important details
|
|
|
|
0.4.5, 0.4.7:
|
|
|
|
JP1 needs to be TBDsee
|
|
|
|
|
|
|
|
see https://github.com/rusefi/hw_microRusEfi/issues/127
|
2020-03-20 06:24:59 -07:00
|
|
|
|
|
|
|
Unpopulated parts which you probably do NOT need:
|
|
|
|
|
2020-03-20 09:16:16 -07:00
|
|
|
LIN termination D43 R10
|
|
|
|
|
2020-03-20 06:24:59 -07:00
|
|
|
RTC diode D42
|
2020-03-20 09:16:16 -07:00
|
|
|
|
|
|
|
Wake-up CAN R8
|