rusefi_documentation/HOWTO-M73-v12-on-Proteus.md

106 lines
4.6 KiB
Markdown
Raw Normal View History

[M73 wiring diagram](BMW_e38_750)
~6 wires are different between [Proteus 0.2](https://github.com/rusefi/rusefi/wiki/Hardware_Proteus_Wiring_v02) and [Proteus 0.3](https://github.com/rusefi/rusefi/wiki/Hardware_Proteus_Wiring_v03)
This HOWTO is focusing on M73 engine with stock ECU harness. 1998 stock ECU harness has two 134 pin connectors.
On my 1998 first set of 9+24+52+40+9=134 pins total is BLACK.
Second set of 9+24+52+40+9=134 pins total is GREY.
rusEFI uses six wire colors: black white red orange green blue.
# Proteus
* +12 from main relay
* x12 injectors
* CLT
* IAT
Destination legend:
"Black #3 40/52" means "Black set of ECU plugs, connector #3 - pin 40 of 52 total pins"
## Black 35 Pin 776231-1
|Pin Number|Name | Type ID | Default function | rusEFI color | Destination |
| ---:|:------------- | ----- |:------------------------------------ |--------- | --- |
| 3 |**Lowside #1** | ls | Injector #1 | Blue | Black #3 41/52 BRN/WHT |
| 4 |**Lowside #3** | ls | Injector #3 | Green | Black #3 40/52 |
| 5 |**Lowside #5** | ls | Injector #5 | Red | Black #3 28/52 |
| 6 |**Lowside #6** | ls | Injector #6 | Orange | Black #3 27/52 BRN/BLK |
| 7 |**Lowside #7** | ls | Injector #7 | Blue | Grey #3 41/52 BRN/WHT |
| 8 |**Lowside #9** | ls | Injector #9 | Green| Grey #3 40/52 |
| 9 |**Lowside #11**| ls | Injector #11 | Red |Grey #3 28/52 |
| 10 |**Lowside #13**| ls | low-side output: main relay | Blue | Black plug #2 23/24 BRN/BLK |
| 15 |**Lowside #2** | ls | Injector #2 | Black | Black #3 15/52 |
| 16 |**Lowside #4** | ls | Injector #4 | White | Black #3 2/52 |
| 17 | **GND** | y | Power GND | Black | Grey #1 4/9 |
| 18 | **GND** | y | Power GND | Black | Black #1 4/9 |
| 19 |**Lowside #8** | y | Injector #8 | Black | Grey #3 15/52 |
| 20 |**Lowside #10**| y | Injector #10 | White| Grey #3 2/52 |
| 21 |**Lowside #12**| y | Injector #12 | Orange | Grey #3 27/52 BRN/BLK |
| 23 |**Lowside #16**| y | low-side output: fuel pump |
| 24 | **GND** | y | Power GND | Black | Grey plug #1 6/9 BRN |
## Black 23 Pin 776228-1
|Pin Number|Name | Type ID | Default function |rusEFI color | OEM connector |
| ---:|:---------- | ----- |:------------------------------------ | :--------- | --- |
| 5 | VR1 pos | vr | Variable Reluctance #1 positive | Orange | Black #3 32/52 |
| 13 | VR1 neg | vr | Variable Reluctance #1 negative | Blue | Black #3 46 /52 |
| 18 | +12 raw | 12v | ignition power / ECU power source | Red | Black plug #4 26/40 GRN/BLK |
| 19 | **GND** | y | Power GND | Black | Black plug #1 6/9 BRN |
| 23 | +12V mr | 12v | ETB/high-side power supply from main relay | Red | Black #1 8/9 RED/BLU |
## White 35 Pin 776231-2
|Pin Number|Name | Type ID | Default function |rusEFI color | OEM connector |
| ---:|:---------- | ----- |:------------------------------------ | :--------- | --- |
| 1 | **GND** | sgnd | Sensor GND | Black | Black #3 21/52 |
| 2 | **GND** | sgnd | Sensor GND |
| 3 | **GND** | sgnd | Sensor GND |
| 9 | 5V SENS 1 | 5v | Analog Voltage +5 supply #1 | Red |
# 9 pin plug #1
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
| | | | | |
| | | | | |
| | | | | |
# 24 pin plug #2
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
| | | | | |
# 52 pin plug #3
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
| | | | | |
# 40 pin plug #4
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
| 6| IN | | start signal from ignition key |
| 17| OUT |BLK | engine speed output for gauge cluster
| 26| IN |GRN/BLK| RED +12v hot in start & run
| 40| OUT |YEL/BRN |BRN starter enable
| | | | | |
# 9 pin plug #5
| Pin | type | OEM color | Description | rusEFI color |
|---|---|---|---|---|
| | | | | |
![ecu1](oem_docs/Bmw/1998_750_e38/BMW-134.jpg)