2020-05-01 11:48:17 -07:00
# Fuel
[Injection settings ](#Injection-settings )
[Injector dead time ](#Injector-dead-time )
[Fuel short-term closed-loop correction ](#Fuel-short-term-closed-loop-correction )
[Coasting Fuel Cutoff Settings ](#Coasting-Fuel-Cutoff-Settings )
[Fuel Table ](#Fuel-Table )
[Injection Phase ](#Injection-Phase )
[Warmup fuel manual Multiplier ](#Warmup-fuel-manual-Multiplier )
[Intake air temperature fuel Multiplier ](#Intake-air-temperature-fuel-Multiplier )
[tCharge Settings ](#tCharge-Settings )
[Accel/Decel Enrichment ](#Accel/Decel-Enrichment )
[TPS/TPS Acceleration Extra Fuel(ms) ](#TPS/TPS-Acceleration-Extra-Fuel(ms ))
[Engine Load Acceleration Enrichment Taper ](#Engine-Load-Acceleration-Enrichment-Taper )
## Injection settings
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Injection_settings.png )
2020-05-01 11:48:17 -07:00
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.\nenable two_wire_batch_injection
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.\nenable two_wire_batch_injection
Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.\nenable two_wire_batch_injection
## Injector dead time
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Injector_dead_time.png )
2020-05-01 11:48:17 -07:00
## Fuel short-term closed-loop correction
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Fuel_short-term_closed-loop_correction.png )
2020-05-01 11:48:17 -07:00
## Coasting Fuel Cutoff Settings
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Coasting_Fuel_Cutoff_Settings.png )
2020-05-01 11:48:17 -07:00
Enable Coasting Fuel Cutoff: This setting disables fuel injection while the engine is in overrun, this is useful as a fuel saving measure and to prevent back firing.
TPS Deactivation Threshold(%): percent between 0 and 100 below which the fuel cut is deactivated, this helps low speed drivability.
## Fuel Table
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Fuel_Table.png )
2020-05-01 11:48:17 -07:00
## Injection Phase
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Injection_Phase.png )
2020-05-01 11:48:17 -07:00
## Warmup fuel manual Multiplier
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Warmup_fuel_manual_Multiplier.png )
2020-05-01 11:48:17 -07:00
## Intake air temperature fuel Multiplier
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Intake_air_temperature_fuel_Multiplier.png )
2020-05-01 11:48:17 -07:00
## tCharge Settings
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_tCharge_Settings.png )
2020-05-01 11:48:17 -07:00
## Accel/Decel Enrichment
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Accel_Decel_Enrichment.png )
2020-05-01 11:48:17 -07:00
## TPS/TPS Acceleration Extra Fuel(ms)
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_TPS_TPS_Acceleration_Extra_Fuelms.png )
2020-05-01 11:48:17 -07:00
## Engine Load Acceleration Enrichment Taper
2020-05-01 11:49:31 -07:00
![x ](overview/TS_generated/dialog_Engine_Load_Acceleration_Enrichment_Taper.png )
2020-05-01 11:48:17 -07:00
2020-05-01 11:52:22 -07:00
generated by class com.rusefi.MdGenerator on Fri May 01 14:51:28 EDT 2020