rusefi_documentation/rusEFI-project-Ignition.md

43 lines
1.5 KiB
Markdown
Raw Normal View History

2020-05-01 11:58:18 -07:00
# [rusEFI project](rusEFI-project)
2020-05-01 11:55:45 -07:00
## Ignition
2020-05-01 12:25:48 -07:00
[Ignition settings](#ignition-settings)
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Dwell](#dwell)
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Ignition Cylinder Extra Timing](#ignition-cylinder-extra-timing)
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Ignition Table](#ignition-table)
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Warmup timing correction](#warmup-timing-correction)
2020-05-01 11:48:17 -07:00
2020-05-01 12:25:48 -07:00
[Ignition Intake Air Temp correction](#ignition-intake-air-temp-correction)
2020-05-01 11:48:17 -07:00
2020-05-01 11:55:45 -07:00
### Ignition settings
2020-05-01 11:49:31 -07:00
![x](overview/TS_generated/dialog_Ignition_settings.png)
2020-05-01 11:55:45 -07:00
2020-05-01 11:48:17 -07:00
Two wire wasted: This is needed if your coils are individually wired (COP) and you wish to use batch ignition (wasted spark).
Timing Mode: Dynamic uses the timing map to decide the ignition timing, Static timing fixes the timing to the value set below (only use for checking static timing).
Use TPS-based Advance Table: This flag allows to use TPS for ignition lookup while in Speed Density Fuel Mode
Dizzy out Pin: This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin
2020-05-01 11:55:45 -07:00
### Dwell
2020-05-01 11:49:31 -07:00
![x](overview/TS_generated/dialog_Dwell.png)
2020-05-01 11:55:45 -07:00
### Ignition Cylinder Extra Timing
2020-05-01 11:49:31 -07:00
![x](overview/TS_generated/dialog_Ignition_Cylinder_Extra_Timing.png)
2020-05-01 11:55:45 -07:00
### Ignition Table
2020-05-01 11:49:31 -07:00
![x](overview/TS_generated/dialog_Ignition_Table.png)
2020-05-01 11:55:45 -07:00
### Warmup timing correction
2020-05-01 11:49:31 -07:00
![x](overview/TS_generated/dialog_Warmup_timing_correction.png)
2020-05-01 11:55:45 -07:00
### Ignition Intake Air Temp correction
2020-05-01 11:49:31 -07:00
![x](overview/TS_generated/dialog_Ignition_Intake_Air_Temp_correction.png)
2020-05-01 11:48:17 -07:00
2020-05-01 11:55:45 -07:00
2020-05-01 12:25:48 -07:00
generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020