diff --git a/Hardware-Proteus-Fabrication.md b/Hardware-Proteus-Fabrication.md
index f2a4fc64..e9946ecc 100644
--- a/Hardware-Proteus-Fabrication.md
+++ b/Hardware-Proteus-Fabrication.md
@@ -1,6 +1,34 @@
 
 [Proteus](https://github.com/mck1117/proteus) is a 4 layer PCB measured 135mm x 82.5mm
 
+[Interactive BOM](https://rusefi.com/docs/ibom/hw48na_V0.4.html)
+
+# 0.4
+
+![x](Hardware/Proteus/Hardware-Proteus-0.4-instructions1.jpg)
+
+![x](Hardware/Proteus/Hardware-Proteus-0.4-instructions2.jpg)
+
+![x](Hardware/Proteus/Hardware-Proteus-0.4-assembled.jpg)
+
+![x](Hardware/Proteus/Hardware-Proteus-0.4-jlc.jpg)
+
+
+# 0.4 Non-JLC BOM
+
+Comment,Designator,Footprint, PN
+68u,"C17,C1001",Capacitor_SMD:CP_Elec_8x10,EEH-ZE1H680V
+PESD1CAN-UX,"D1,D2",Package_TO_SOT_SMD:SOT-323_SC-70,PESD1CAN-UX
+MAX9924,"U1203,U1204",Package_SO:MSOP-10_3x3mm_P0.5mm,MAX9924UAUB+T
+VNLD5160,"U201,U202,U301,U302,U401,U402,U501,U502",Package_SO:SOIC-8_3.9x4.9mm_P1.27mm,VNLD5160TR-E
+
+TLS115,"U1004,U1005",Package_SO:Infineon_PG-DSO-8-43,TLS115D0E
+Ferrite_Bead,FB1501,Inductor_SMD:L_0603_1608Metric,BLM18EG221SN1D
+Polyfuse,"F101,F102",Resistor_SMD:R_1206_3216Metric,1206L012WR
+Micro_SD_Card,J1,Connector_Card:microSD_HC_Wuerth_693072010801,47219-2001
+SW_Push,"SW1501,SW1502",Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK,
+
+
 [jlcpcb.com](http://www.jlcpcb.com) not only fabricates the PCB but also assembles a significant portion of Proteus pretty cheaply.
 
 For best results take three official files from latest [export](https://github.com/mck1117/proteus/tree/master/export) folder
@@ -11,8 +39,6 @@ For best results take three official files from latest [export](https://github.c
 
 3) placement file for where to place those components
 
-TODO picture of Proteus as received from JLCPCB.
-
 At QTY 10, each pre-assembled Proteus board costs under $40. DHL delivery is cheap and fast, you should have your 80% ready board in about 12 days!
 
 The remaining components would cost you XXX more, BOM for final assembly is available at YYY.
@@ -24,12 +50,8 @@ Acceptable 3D printed case files are not public yet.
 CNC files to cut holes in 1590wxxfl/1590xxfl cases are available at https://github.com/mck1117/proteus/blob/master/export/proteus-case.step
 
 
-# 0.4
-
-![x](Hardware/Proteus/Hardware-Proteus-0.4-assembled.jpg)
-
-![x](Hardware/Proteus/Hardware-Proteus-0.4-jlc.jpg)
 
 # 0.3
 
-![x](Hardware/Proteus/Hardware-Proteus-0.3.jpg)  
\ No newline at end of file
+![x](Hardware/Proteus/Hardware-Proteus-0.3.jpg) 
+
diff --git a/Hardware/Proteus/Hardware-Proteus-0.4-instructions1.jpg b/Hardware/Proteus/Hardware-Proteus-0.4-instructions1.jpg
new file mode 100644
index 00000000..c5fdf1ea
Binary files /dev/null and b/Hardware/Proteus/Hardware-Proteus-0.4-instructions1.jpg differ
diff --git a/Hardware/Proteus/Hardware-Proteus-0.4-instructions2.jpg b/Hardware/Proteus/Hardware-Proteus-0.4-instructions2.jpg
new file mode 100644
index 00000000..c5bbe701
Binary files /dev/null and b/Hardware/Proteus/Hardware-Proteus-0.4-instructions2.jpg differ