rusefi
/
rusefi_documentation
mirror of https://github.com/rusefi/rusefi_documentation.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

fix typos and lint warnings

This commit is contained in:
mi-hol 2023-01-08 14:49:45 +01:00
parent f1fffc45eb
commit 2542c98284
2 changed files with 12 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
.vscode/settings.json vendored
View File

@ -27,6 +27,7 @@
"Integra",
"Jetta",
"Jimny",
"JTAG",
"Lada",
"luamemory",
"luareset",
@ -38,6 +39,7 @@
"Multispark",
"octopart",
"Passat",
"pgnd",
"Pinout",
"pinouts",
"Primera",
@ -45,6 +47,7 @@
"Sagem",
"Scoupe",
"SEPHIA",
"sgnd",
"SOHC",
"Sorento",
"sparkcut",

18
Hardware-microRusEFI-wiring.md
View File

@ -4,7 +4,7 @@
[Interactive Pinout](https://rusefi.com/docs/pinouts/microrusefi/)
**WARNING: for historical reasons microRusEFI pin numbers do not match Molex numbers on the plastic**
**WARNING: for historical reasons microRusEFI pin numbers do not match Molex numbers on the plastic**
![connector](Hardware/microRusEFI/Hardware_microRusEFI_connector.png)
@ -48,21 +48,21 @@ These tables provide technical information about the different types of pin foun
|------|---------------------| ------------------------------------------------------------------------------------ | --- |
| at | Analog temperature | Analog temperature (thermistor) input. <mark>2.7k/TBD</mark> pullup resistor to 5v | Thermistor temperature sensor, fuel level sender (variable resistor type) |
| av | Analog voltage | Analog voltage input. 500k pull down to GND | Analog voltage sensor (MAP, TPS, acc pedal, oil pressure, etc)
| vr | Variable reluctor | VR crank input | VR sensors including crank, cam, vehicle speed
| vr | Variable reluctance | VR crank input | VR sensors including crank, cam, vehicle speed
| hall | Hall cam/crank | <mark>TBD pull up to 5v</mark> hall sensor for cam/crank | Hall sensors including crank, cam, vehicle speed
### Output
| ID | Type | Notes & Limits | Possible functions |
|----|-------------| ---- | --- |
| inj | Injector output | Low side, 2.2A maximum<br/>**Only saturated (high impedance) injectors are supported.** | Injector, general purpose low side |
| inj | Injector output | Low side, 2.2A maximum **Only saturated (high impedance) injectors are supported.** | Injector, general purpose low side |
| ign | Ignition output | 5V push-pull, 250mA maximum | Ignition coil, general purpose 5V push-pull
| ls | High power low side | General purpose low side output, 4.5A maximum | General purpose low side, injector
| gp_high | General purpose high side | General purpose high side push output, 5V/12V (internally selectable based on JP2 jumper) 250mA maximum | General purpose 5V/12V high side, ignition coil
| gp_low | General purpose low side | General purpose low side pull output, 12V 500mA maximum | General purpose low side
| gp_pp | General purpose Push-Pull | General purpose push-pull (low and high side) output, 600mA | Bipolar IDLE stepper, relays, solenoids |
| mr | Main relay | Dedicated main relay output. Low side turned on with power, 800mA maximum. | Main relay
| etb | Electronic throttle | Dedicated electronic throttle outputs. Connect a brushed motor<br/>throttle body directly to these two pins.
| etb | Electronic throttle | Dedicated electronic throttle outputs. Connect a brushed motor throttle body directly to these two pins.
### Communication
@ -83,7 +83,7 @@ USB cable red wire: +5v (would not work via microRusEFI connector for versions <
### Hall type Crank sensor
See TLE8888 datasheet figure 71
See TLE8888 data sheet figure 71
R9=DNP
R15=DNP
R17=2.7K pull-up to 5v
@ -116,7 +116,7 @@ J4:
[J2 Interactive Pinout](https://rusefi.com/docs/pinouts/microrusefi/main.html)
Three GPIOs are available on J2 (SWD) connector. If you are not going to use debuger J2 connector can be used for other purposes.
Three GPIOs are available on J2 (SWD) connector. If you are not going to use debugger J2 connector can be used for other purposes.
| N | Name | Possible functions (not all listed!) |
|----|-------------| ---- |
| 7, 8 | GND | GND |
@ -127,13 +127,13 @@ Three GPIOs are available on J2 (SWD) connector. If you are not going to use deb
| 6 | SWO | SWD/JTAG data out (?) or SPI1_SCK or SPI3_SCK |
| 10 | NRST | CPU reset input (active low) |
For HW version 0.5.0 and newer some additional GPIOs are available on testpoints around STM32.
For HW version 0.5.0 and newer some additional GPIOs are available on test points around STM32.
![x](Hardware/microRusEFI/J8_9_10.png)
[Testpoint Interactive Pinout](https://rusefi.com/docs/pinouts/microrusefi/pads.html)
[Test point Interactive Pinout](https://rusefi.com/docs/pinouts/microrusefi/pads.html)
| Tespoint | GPIO | Possible functions (not all listed!) |
| Test point | GPIO | Possible functions (not all listed!) |
|----|-------------| ---- |
| J6 | PE0 | GPIO |
| J8 | PB7 | USART1_RX or TIM4_CH2 |