From a100300a93cb032e563a11d84225778b69adf733 Mon Sep 17 00:00:00 2001
From: rusefillc <48498823+rusefillc@users.noreply.github.com>
Date: Thu, 22 Dec 2022 21:45:55 -0500
Subject: [PATCH] Updated Cranking (markdown)

---
 Cranking.md | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/Cranking.md b/Cranking.md
index 30efb057..eed36936 100644
--- a/Cranking.md
+++ b/Cranking.md
@@ -69,7 +69,6 @@ rusEFI has a separate cranking control strategy for your first couple of engine
 ## General Cranking Settings
 ### Cranking RPM limit
 *This sets the RPM limit below which the ECU will use cranking fuel and ignition logic, typically this is around 350-450 rpm.* <details><summary>More...</summary>
-In rusEFI Console, you can use command ```set cranking_rpm X``` to change this value.</details>
 
 ### Enable cylinder cleanup
 *When enabled, if the throttle pedal is held above 90% then no fuel is injected while cranking to clear excess fuel from the cylinders.*
@@ -92,9 +91,6 @@ In rusEFI Console, you can use command ```set cranking_rpm X``` to change this v
 
 See also isFasterEngineSpinUpEnabled
 
-rusEFI Console command:
-```set cranking_priming_pulse X```
-
 </details>
 
 ### Falloff temperature
@@ -125,16 +121,12 @@ rusEFI Console command:
 
 <details><summary>More...</summary>
 
-To adjust cranking fuel, use ```set cranking_fuel XXX``` command, where XXX is the number of total fuel squirt duration in milliseconds. See also [Console Commands - Fuel Control](Dev-Console-Commands#fuel-control)
-
 </details>
 
 ## Ignition Settings
 ### Advance
 *Ignition advance angle used during engine cranking, 5-10 degrees will work as a base setting for most engines.*
 
-*rusEFI Console command:
-```set cranking_timing_angle X```*
 
 ### Use separate Advance Table for cranking
 
@@ -150,8 +142,6 @@ To adjust cranking fuel, use ```set cranking_fuel XXX``` command, where XXX is t
 
 *If set to true, will use the specified duration for cranking dwell. If set to false, will use the specified dwell angle. Unless you have a really good reason to, leave this set to true to use duration mode.*
 
-*rusEFI Console command:
-```set cranking_charge_angle X```*
 
 ## IAC Settings
 ### Cranking IAC position