diff --git a/NAG1---722.6.md b/NAG1---722.6.md
index c8671bad..0c13e913 100644
--- a/NAG1---722.6.md
+++ b/NAG1---722.6.md
@@ -87,228 +87,88 @@ cleared from the TCM with a scan tool.
 
 # Fault Codes
 
-FAULT 
-CODE 
-J2012 
-DTC 
-A580 
-DTC 
-DESCRIPTION OF 
-FAULT 
-LIMP-IN 
-SET 
-MIL 
-LIT 
-TYPE OF 
-FAILURE 
-2 P0753 2100 1–2/4–5 Shift Solenoid Yes (P) Yes C, E, S 
-3 P0758 2102 2–3 Shift Solenoid Yes (P) Yes C, E, S 
-4 P0763 2104 3–4 Shift Solenoid Yes (P) Yes C, E, S 
-5 P0743 2106 TCC Solenoid Circuit Yes (P) Yes C, E, S 
-6 P0748 2107 Modulating Pressure 
-Solenoid Circuit 
-Yes (P) Yes C, E, S 
-7 P0778 2108 Shift Pressure Solenoid 
-Circuit 
-Yes (P) Yes C, E, S 
-10 P0657 2602 Solenoid Supply Voltage Yes (P) Yes C, E, S 
-11 P0642 2603 Sensor Supply Voltage 
-Low 
-Yes (P) Yes C, E, S 
-78 P0643 Sensor Supply Voltage 
-High 
-Yes (P) Yes C, E, S 
-12 P0717 2200 N2 Input Speed Sensor 
-Circuit 
-Yes (T) Yes C, E, S 
-13 P2767 2203 N3 Input Speed Sensor 
-Circuit 
-Yes (T) Yes C, E, S 
-14 P2784 220A Input Sensors Mismatch Yes (T) Yes C, E, S, T 
-15 P1704 220B N2 Sensor Overspeed Yes (N) Yes C, T 
-99 P1705 N3 Sensor Overspeed Yes (N) Yes C, T 
-19 P0563 2601 System Overvoltage Yes (T) Yes C, E 
-20 P0712 2220 Transmission Oil Temp. 
-Sensor Shorted 
-No No C, E, S 
-21 P0562 2600 System Undervoltage Yes (T) Yes C, E 
-22 U140C 2400 CAN Right Rear Wheel 
-Speed Signal Not Valid 
-No No C, E, S 
-23 U140B 2401 CAN Left Rear Wheel 
-Speed Signal Not Valid 
-No No C, E, S 
-24 U140A 2402 CAN Right Front Wheel 
-Speed Signal Not Valid 
-No No C, E, S 
-25 U1409 2403 CAN Left Front Wheel 
-Speed Signal Not Valid 
-No No C, E, S 
- P0501 Vehicle Speed Sensor 
-Performance/Rationality 
-Yes (T) Yes C, E, S 
-26 U1400 2405 CAN Engine TPS Message 
-Not Valid 
-No No C, E, S 
-27 U1404 2406 CAN Static Engine Torque 
-Message Not Valid 
-No No C, E 
-28 U1401 240A CAN Engine Speed 
-Message Not Valid 
-No No C, E, S 
-29 U1405 2408 CAN Minimum Engine 
-Torque Message Not Valid 
-No No C, E 
-30 U0141 2314 Lost Communication with 
-Central Gateway 
-No No C, E 
-31 U1406 2409 CAN Maximum Engine 
-Torque Message Not Valid 
-No No C, E 
-32 U1407 2407 CAN Engine Torque 
-Demand Message Not 
-Valid 
-No No C, E 
-33 U1408 2404 CAN ABS Brake Light 
-Switch Message Not Valid 
-No No C, E 
-34 U0103 2313 Lost Communication with 
-Electric Gearshift Module 
-Yes (T) Yes C, E 
-35 U0155 2315 Lost Communication with 
-Instrument Panel 
-No No C, E 
-36 U110B 2312 CAN Engine Coolant 
-Message Missing 
-No No C, E 
-37 U0002 2300 Bus-Off CAN Controller 1 Yes (T) Yes C, E 
-38 U0121 2310 ABS CAN Messages 
-Missing 
-Yes (T) Yes C, E 
-39 U0100 2311 Engine CAN Messages 
-Missing 
-No Yes C, E 
-40 U0164 2316 Lost Communication with 
-A/C Control Module 
-No No C, E
-41 U0114 2317 Lost Communication with 
-CAN Transfer Case 
-Yes (T) Yes C, E 
-42 U0404 240C CAN Gearshift Position 
-Message Not Valid 
-Yes (T) Yes C, E 
-43 U1402 240B CAN Engine Coolant 
-Temperature Message Not 
-Valid 
-No No C, E, S 
-44 U0414 240D CAN Transfer Case 
-Message Not Valid 
-Yes (T) Yes C, E 
-48 P0602 2010 Internal Controller 
-Variant Not Coded 
-Yes (P) Yes C 
-49 P0219 2501 Engine Overspeed Yes (N) Yes C, T 
-50 P0730 2500 Improper Gear Ratio Yes (N) Yes C, E, T 
-51 P0731 2502 Transmission Slipping in 
-First Gear 
-Yes (C) Yes C, T 
-100 P0732 Transmission Slipping in 
-Second Gear 
-Yes (C) Yes C, T 
-101 P0733 Transmission Slipping in 
-Third Gear 
-Yes (C) Yes C, T 
-102 P0734 Transmission Slipping in 
-Fourth Gear 
-Yes (C) Yes C, T 
-103 P0735 Transmission Slipping in 
-Fifth Gear 
-Yes (C) Yes C, T 
-52 P0742 2510 TCC Stuck On 
-(Mechanical) 
-No No C, E, S, T 
-53 P2783 2511 TCC Overtemp No No T 
-54 P2638 2520 Torque Reduction 
-Acknowledge Not Correct 
-No No C 
-55 P1731 2503 Incorrect Gear Engaged Yes (T) Yes C, E, S 
-56 P1629* 2013 Solenoid 
-Supply/Watchdog 
-Yes (P) Yes C 
-57 P1631* 2004 Internal Controller Clock 
-Failure 
-Yes (P) Yes C
-58 P1632* 2000 Internal Controller Test 
-Internal Watchdog Failure 
-Yes (P) Yes C 
-59 P1633* 2002 Internal Controller Test 
-External Watchdog 
-Failure 
-Yes (P) Yes C 
-60 P1634* 2001 Internal Controller 
-Internal Watchdog 
-Occurred 
-No Yes C 
-61 P1636* 2003 Internal Controller 
-External Watchdog 
-Occurred 
-No Yes C 
-62 P0604 2005 Internal Controller RAM 
-Failure 
-Yes (P) Yes C 
-63 P0605 2008 Internal Controller ROM 
-Failure 
-Yes (P) Yes C 
-65 P1637 200A Internal Controller 
-EEROM Failure 
-No No C 
-66 P1638* 2006 Internal Controller CAN 1 
-RAM Failure 
-Yes (P) Yes C 
-67 P1639* 2007 Internal Controller CAN 2 
-RAM Failure 
-Yes (P) Yes C 
- P0613 Internal Controller Failure Yes (P) Yes C 
-71 P0752 2101 1–2/4–5 Solenoid Circuit Yes (P) Yes C, E, S 
-72 P0757 2103 2–3 Solenoid Circuit Yes (P) Yes C, E, S 
-73 P0762 2105 3–4 Solenoid Circuit Yes (P) Yes C, E, S 
-74 P0710 2221 Temperature Sensor P/N 
-Switch Circuit 
-No No C, E, S 
-75 P0714 2222 Temp. Sensor Erratic No No C, E, S 
-80 U1508 2333 Electric Gearshift Module 
-Incorrect Message Length 
-Yes (T) Yes C, E 
-81 U0415 2330 ABS Controller Incorrect 
-Message Length 
-Yes (T) Yes C, E 
-82 U0401 2331 Engine Controller 
-Incorrect Message Length 
-No Yes C, E 
-83 U1507 2335 Engine Coolant 
-Temperature Incorrect 
-Message Length 
-No No C, E 
-84 U0431 2334 Central Gateway Incorrect 
-Message Length 
-No No C, E 
-85 U0423 2332 Instrument Panel 
-Incorrect Message Length 
-No No C, E 
-86 U0424 2336 A/C Controller Incorrect 
-Message Length 
-No No C, E 
-87 U1506 2337 Transfer Case Controller 
-Incorrect Message Length 
-Yes (T) Yes C, E 
-111 U140F CAN Engine Variant 
-Message Not Valid or 
-Missing 
-Yes (P) Yes C, E 
-112 U1410 CAN FCM Variant 
-Message Not Valid or 
-Missing 
-Yes (P) Yes C, E
+|FAULT CODE|J2012 DTC|A580 DTC|DESCRIPTION OF FAULT|LIMP-IN SET|MIL LIT|TYPE OF FAILURE|
+|---|---|---|---|---|---|---|
+|2 |P0753| 2100| 1–2/4–5 Shift Solenoid| Yes (P)| Yes| C, E, S|
+|3 |P0758 |2102| 2–3 Shift Solenoid |Yes (P) |Yes| C, E, S| 
+|4 |P0763 |2104| 3–4 Shift Solenoid |Yes (P) |Yes| C, E, S|
+|5| P0743 |2106| TCC Solenoid Circuit |Yes (P)| Yes |C, E, S|
+|6| P0748 |2107 |Modulating Pressure Solenoid Circuit |Yes (P)| Yes |C, E, S| 
+|7| P0778 |2108 |Shift Pressure Solenoid Circuit| Yes (P)| Yes |C, E, S |
+|10| P0657| 2602| Solenoid Supply Voltage| Yes (P)| Yes| C, E, S| 
+|11 |P0642| 2603| Sensor Supply Voltage Low Yes (P) |Yes| C, E, S |
+|78 |P0643| Sensor Supply Voltage High |Yes (P)| Yes |C, E, S |
+|12| P0717 |2200 |N2 Input Speed Sensor Circuit |Yes (T)| Yes| C, E, S |
+|13| P2767 |2203 |N3 Input Speed Sensor Circuit |Yes (T)| Yes| C, E, S |
+|14 |P2784 |220A| Input Sensors Mismatch |Yes (T)| Yes| C, E, S, T |
+|15 |P1704| 220B| N2 Sensor Overspeed |Yes (N)| Yes| C, T |
+|99 |P1705|---|N3 Sensor Overspeed| Yes (N)| Yes| C, T |
+|19 |P0563 |2601| System Overvoltage| Yes (T)| Yes| C, E| 
+|20 |P0712| 2220| Transmission Oil Temp. Sensor Shorted |No| No| C, E, S |
+|21| P0562 |2600| System Undervoltage |Yes (T)| Yes| C, E |
+|22| U140C |2400| CAN Right Rear Wheel Speed Signal Not Valid |No| No| C, E, S |
+|23| U140B| 2401| CAN Left Rear Wheel Speed Signal Not Valid |No| No| C, E, S| 
+|24 |U140A| 2402 |CAN Right Front Wheel Speed Signal Not Valid |No| No| C, E, S |
+|25 |U1409 |2403| CAN Left Front Wheel Speed Signal Not Valid |No| No |C, E, S |
+|---| P0501 |---|Vehicle Speed Sensor Performance/Rationality |Yes (T)| Yes| C, E, S |
+|26| U1400| 2405| CAN Engine TPS Message Not Valid |No| No| C, E, S |
+|27 |U1404 |2406 |CAN Static Engine Torque Message Not Valid |No| No| C, E |
+|28 |U1401| 240A| CAN Engine Speed Message Not Valid |No| No| C, E, S |
+|29 |U1405| 2408| CAN Minimum Engine Torque Message Not Valid |No| No| C, E |
+|30| U0141 |2314 |Lost Communication with Central Gateway |No| No| C, E |
+|31| U1406| 2409| CAN Maximum Engine Torque Message Not Valid |No| No |C, E |
+|32 |U1407 |2407 |CAN Engine Torque Demand Message Not Valid |No |No| C, E |
+|33 |U1408| 2404| CAN ABS Brake Light Switch Message Not Valid |No| No |C, E|
+|34| U0103| 2313| Lost Communication with Electric Gearshift Module |Yes (T) |Yes |C, E |
+|35 |U0155| 2315| Lost Communication with Instrument Panel |No |No| C, E |
+|36| U110B |2312 |CAN| Engine Coolant Message Missing |No| No| C, E |
+|37 |U0002| 2300| Bus-Off CAN Controller 1| Yes (T)| Yes| C, E |
+|38 |U0121| 2310| ABS CAN Messages Missing |Yes (T)| Yes| C, E |
+|39 |U0100 |2311 |Engine CAN Messages Missing |No| Yes| C, E |
+|40 |U0164| 2316| Lost Communication with A/C Control Module |No| No| C, E|
+|41 |U0114| 2317| Lost Communication with CAN Transfer Case |Yes (T)| Yes| C, E| 
+|42| U0404 |240C| CAN Gearshift Position Message Not Valid |Yes (T) |Yes| C, E |
+|43| U1402 |240B| CAN Engine Coolant Temperature Message Not Valid |No| No| C, E, S |
+|44| U0414 |240D| CAN Transfer Case Message Not Valid |Yes (T) |Yes| C, E |
+|48| P0602 |2010| Internal Controller Variant Not Coded |Yes (P)| Yes |C |
+|49 |P0219| 2501 |Engine Overspeed| Yes (N)| Yes| C, T| 
+|50 |P0730 |2500| Improper Gear Ratio |Yes (N)| Yes| C, E, T |
+|51| P0731 |2502| Transmission Slipping in First Gear| Yes (C)| Yes |C, T |
+|100 |P0732|---| Transmission Slipping in Second Gear |Yes (C)| Yes| C, T |
+|101| P0733|---| Transmission Slipping in Third Gear |Yes (C) |Yes |C, T |
+|102 |P0734 |---|Transmission Slipping in Fourth Gear |Yes (C)| Yes| C, T |
+|103 |P0735|---| Transmission Slipping in Fifth Gear |Yes (C)| Yes| C, T| 
+|52| P0742| 2510| TCC Stuck On (Mechanical) |No| No |C, E, S, T |
+|53| P2783| 2511 |TCC Overtemp| No| No| T |
+|54| P2638| 2520 |Torque Reduction Acknowledge Not Correct| No| No| C |
+|55| P1731 |2503 |Incorrect Gear Engaged| Yes (T) |Yes |C, E, S |
+|56| P1629* |2013| Solenoid Supply/Watchdog |Yes (P)| Yes| C| 
+|57| P1631* |2004 |Internal Controller Clock Failure |Yes (P)| Yes| C|
+|58 |P1632* |2000 |Internal Controller Test Internal Watchdog Failure| Yes (P)| Yes C |
+|59 |P1633*| 2002 |Internal Controller Test External Watchdog Failure| Yes (P)| Yes |C |
+|60| P1634*| 2001 Internal Controller Internal Watchdog Occurred| No| Yes| C |
+|61| P1636*| 2003 |Internal Controller External Watchdog Occurred |No| Yes| C |
+|62 |P0604 |2005| Internal Controller RAM Failure |Yes (P)| Yes |C |
+|63 |P0605 |2008 |Internal Controller ROM Failure |Yes (P)| Yes| C |
+|65 |P1637| 200A| Internal Controller EEROM Failure |No| No| C| 
+|66 |P1638/*| 2006| Internal Controller CAN 1 RAM Failure |Yes (P)| Yes| C |
+|67 |P1639/* |2007 |Internal Controller CAN 2 RAM Failure |Yes (P)| Yes| C |
+|---| P0613|---|Internal Controller Failure |Yes (P)| Yes| C |
+|71| P0752| 2101| 1–2/4–5 Solenoid Circuit |Yes (P) |Yes| C, E, S |
+|72 |P0757| 2103| 2–3 Solenoid Circuit |Yes (P)| Yes |C, E, S |
+|73 |P0762| 2105 |3–4 Solenoid Circuit| Yes (P) |Yes| C, E, S |
+|74 |P0710| 2221| Temperature Sensor P/N Switch Circuit |No| No| C, E, S |
+|75| P0714| 2222| Temp. Sensor Erratic| No| No| C, E, S |
+|80| U1508 |2333| Electric Gearshift Module Incorrect Message Length |Yes (T)| Yes| C, E 
+|81| U0415| 2330| ABS Controller Incorrect Message Length |Yes (T) |Yes |C, E |
+|82 |U0401| 2331 |Engine Controller Incorrect Message Length |No| Yes| C, E |
+|83| U1507| 2335 |Engine Coolant Temperature Incorrect Message Length |No| No| C, E |
+|84 |U0431| 2334 |Central Gateway Incorrect Message Length |No |No |C, E |
+|85 |U0423 |2332| Instrument Panel Incorrect Message Length |No| No| C, E |
+|86 |U0424| 2336 |A/C Controller Incorrect Message Length |No| No |C, E |
+|87| U1506 |2337 |Transfer Case Controller Incorrect Message Length |Yes (T) |Yes |C, E |
+|111 |U140F|---| CAN Engine Variant Message Not Valid or Missing| Yes (P)| Yes C, E |
+|112| U1410 |---|CAN FCM Variant Message Not Valid or Missing |Yes (P)| Yes |C, E|
 
 These faults also set 
 code P0613