Updated MREAdapter55 (markdown)
This commit is contained in:
parent
0266217dce
commit
425041188b
|
@ -2,3 +2,26 @@
|
|||
Looking for a motivated beta tester.
|
||||
|
||||
[Forum thread](https://rusefi.com/forum/viewtopic.php?f=4&t=1668)
|
||||
|
||||
|
||||
# E30 fitment notes
|
||||
|
||||
pin fixes needed:-
|
||||
Pin 6 is marked as fan but is a lowside output, this will work fine for tacho as it is a 12v grounded.
|
||||
pin 9 speed sensor needs jumping to pin 29 with the stepper input disabled/left floating.
|
||||
pin 15 lambda sensor heat is just a lowside to turn on relay, this should work for CEL
|
||||
pin 17 EGR valve is another lowside, this can work with the injectors just fine.
|
||||
pin 20 left floating as single coil on E30
|
||||
pin 21 left floating as no stepper on E30
|
||||
pin 22 is check lamp but icv on E30, should be fine as both are lowsides.
|
||||
pin 23 is injectors but lambda heater on e30, should be fine as both are lowsides.
|
||||
pin 25 air con relay left floating or jumped to pin 40/41 as appropriate
|
||||
pin 26 is a problem, MAF on stepper output - don't know solution at present.
|
||||
pin 29 is a problem, VSS input on stepper output - don't know solution at present.
|
||||
pin 33 is reserved for a high current output but is cam signal on all others - don't know solution at present.
|
||||
pin 32 is extra low side, this should work for fuel rate base on Matt and my checking of fuel rate outputs
|
||||
pin 33 left floating or jumped to pin 23
|
||||
pin 34 left floating as no inj4 on E30
|
||||
pin 35 left floating as no inj3 on E30
|
||||
pin 36 is variable intake on January but main relay on E30, might work if both are lowsides?
|
||||
pin 38 high side output, no idea if this is correct for transmission output.
|
||||
|
|
Loading…
Reference in New Issue