diff --git a/Hardware-microRusEFI-wiring.md b/Hardware-microRusEFI-wiring.md
index 0d5e1574..80099768 100644
--- a/Hardware-microRusEFI-wiring.md
+++ b/Hardware-microRusEFI-wiring.md
@@ -2,16 +2,10 @@
 
 ## Connector Pinout
 
-[Interactive Pinout](https://rusefi.com/docs/pinouts/microrusefi/)
+[ *** >>> Interactive Pinout <<< ***](https://rusefi.com/docs/pinouts/microrusefi/)
 
     **WARNING: for historical reasons microRusEFI pin numbers do not match Molex numbers on the plastic**
 
-Rear side of PCB
-
-![microRusEFI image](Hardware/microRusEFI/Hardware_microRusEFI_0_3_PCB_pinout.png)
-
-![x](Hardware/microRusEFI/microRusEFI_connectors/MRE_reality.jpg)
-
 In some cases without "main relay output +12v" both pins #1 and #5 should be connected to the single source of +12v.
 
 Pin #1 feeds ETB H-bridge, battery voltage sense, gp5 & gp6 high-side +12v, TLE8888 H-bridges.
@@ -150,3 +144,7 @@ A: "temperature input" is a just an analog 0-5v input with a strong pull-up impl
 [old not great static pinout](Hardware/microRusEFI/Hardware_microRusEFI_connector.png)
 
 [microRusEFI photo](Hardware/microRusEFI/Hardware_microRusEFI_connector.jpg)
+
+[microRusEFI image](Hardware/microRusEFI/Hardware_microRusEFI_0_3_PCB_pinout.png)
+
+[reality](Hardware/microRusEFI/microRusEFI_connectors/MRE_reality.jpg)