more about LED
This commit is contained in:
parent
42a2ea756e
commit
48b7d9e8bd
|
@ -50,7 +50,7 @@ Q: What pin do I use for tachometer output?
|
|||
|
||||
A: There is no single right answer. It really depends on what kind of electrical signal is your tachometer expecting. Is it low-side driven? +5v logic signal driven? +12v logic signal driven?
|
||||
|
||||
Q: What are these four LEDs?
|
||||
Q: What are these four status LEDs close to main processor?
|
||||
|
||||
A: Many rusEFI boards have four status LEDs. All four LEDs blink on start-up just to confirm life.
|
||||
|
||||
|
@ -59,4 +59,9 @@ If USB communication cable is connected Blue LED starts to blink faster.
|
|||
|
||||
Red CRITICAL (previously known as FATAL) error means you have a CRITICAL error, engine operation is not possible with CRITICAL error.
|
||||
|
||||
Green LED on many rusEFI boards is RUNNING. Off if engine is stopped, blinks if engine is cranking, solid if engine is running.
|
||||
Green LED on many rusEFI boards is RUNNING. Off if engine is stopped, blinks if engine is cranking, solid if engine is running.
|
||||
|
||||
Q: what about many other LEDs which seem to be blinking in sync with injectors or coils?
|
||||
|
||||
A: Following Frankenso tradition, Injector LEDs are RED. Ignition LED are blue, power LED are green.
|
||||
|
||||
|
|
Loading…
Reference in New Issue