From 4e79cee971f1a1e7a8d8332d041a12013018a0be Mon Sep 17 00:00:00 2001
From: mi-hol <22799428+mi-hol@users.noreply.github.com>
Date: Thu, 17 Nov 2022 14:16:44 +0100
Subject: [PATCH] update "Emulating a serial port to connect to Tunerstudio
 lite" (#254)

* update "Emulating a serial port to connect to Tunerstudio lite"

a required step for first use was missing

* Update Virtual-simulator.md
---
 HOWTO/Virtual-simulator.md | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/HOWTO/Virtual-simulator.md b/HOWTO/Virtual-simulator.md
index 6e76df57..0de5fd4b 100644
--- a/HOWTO/Virtual-simulator.md
+++ b/HOWTO/Virtual-simulator.md
@@ -42,7 +42,11 @@ choose the driver "Standard Protocols Driver" and connection type "TCP/IP - WiFi
 
 ## Emulating a serial port to connect to Tunerstudio lite
 
-If you prefer using the free version of Tunerstudio - Tunerstudio lite -  you'll need to install a serial port emulator from [here](https://www.hw-group.com/software/hw-vsp3-virtual-serial-port#download). You'll need to emulate a port on your PC. The only thing that you'll need to do is to choose a port name, COM100 for example, and to change the port address to 29002.
+If you prefer using the free version of Tunerstudio - Tunerstudio lite -  you'll need to install a serial port emulator 
+from [here](https://www.hw-group.com/software/hw-vsp3-virtual-serial-port#download). 
+After download, install it, then run the configuration application "HW Virtual Serial Port".
+- switch from "read only access" to "admin access" by clicking "Login" button
+- choose a port name, COM100 for example, and change the port address to 29002.
 
 
 
@@ -77,7 +81,7 @@ and
 
 `telnet localhost 29002`
 
-to make sure that TS protocol is alive.
+to make sure that Tunerstudio protocol is alive.
 
 Expected behavior is that connection would be established. If it does not, you might need to look in firewall settings.