From 99c43d8879db445067119439aa4769c57277ff79 Mon Sep 17 00:00:00 2001
From: mi-hol <22799428+mi-hol@users.noreply.github.com>
Date: Thu, 15 Dec 2022 15:06:57 +0100
Subject: [PATCH] fix invalid references

---
 .vscode/settings.json                         |  1 +
 Overview/TS_generated/rusEFI-project-Idle.md  | 16 ++--
 .../TS_generated/rusEFI-project-Ignition.md   | 19 +++--
 .../TS_generated/rusEFI-project-Sensors.md    | 61 ++++++++------
 Overview/TS_generated/rusEFI-project.md       | 79 +++++++++----------
 5 files changed, 100 insertions(+), 76 deletions(-)

diff --git a/.vscode/settings.json b/.vscode/settings.json
index 59cb54c3..02e70606 100644
--- a/.vscode/settings.json
+++ b/.vscode/settings.json
@@ -4,6 +4,7 @@
         "Altima",
         "Aristo",
         "Avenir",
+        "Baro",
         "Berlingo",
         "Celica",
         "DOHC",
diff --git a/Overview/TS_generated/rusEFI-project-Idle.md b/Overview/TS_generated/rusEFI-project-Idle.md
index f49bd69b..dd72bd39 100644
--- a/Overview/TS_generated/rusEFI-project-Idle.md
+++ b/Overview/TS_generated/rusEFI-project-Idle.md
@@ -1,5 +1,7 @@
 # [rusEFI project](rusEFI-project)
+
 ## Idle
+
 [Idle settings](#idle-settings)
 
 [Idle hardware](#idle-hardware)
@@ -11,7 +13,8 @@
 [Warmup Idle multiplier](#warmup-idle-multiplier)
 
 ### Idle settings
-![x](Overview/TS_generated/dialog_Idle_settings.png)
+
+![x](/Overview/TS_generated/dialog_Idle_settings.png)
 
 use ETB for idle: This setting allows the ETB to act as the idle air control valve and move to regulate the airflow at idle.
 
@@ -36,7 +39,8 @@ PID Extra for low RPM(%): Increases PID reaction for RPM<target by adding extra
 Use IAC PID Multiplier Table: This flag allows to use a special 'PID Multiplier' table (0.0-1.0) to compensate for nonlinear nature of IAC-RPM controller
 
 ### Idle hardware
-![x](Overview/TS_generated/dialog_Idle_hardware.png)
+
+![x](/Overview/TS_generated/dialog_Idle_hardware.png)
 
 Use Stepper: This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed.
 
@@ -51,13 +55,15 @@ Two-wire mode: TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two w
 Two-wire mode: TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode.
 
 ### Idle Target RPM
-![x](Overview/TS_generated/dialog_Idle_Target_RPM.png)
+
+![x](/Overview/TS_generated/dialog_Idle_Target_RPM.png)
 
 ### Closed-loop idle timing
-![x](Overview/TS_generated/dialog_Closed-loop_idle_timing.png)
+
+![x](/Overview/TS_generated/dialog_Closed-loop_idle_timing.png)
 
 ### Warmup Idle multiplier
-![x](Overview/TS_generated/dialog_Warmup_Idle_multiplier.png)
 
+![x](/Overview/TS_generated/dialog_Warmup_Idle_multiplier.png)
 
 generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020
diff --git a/Overview/TS_generated/rusEFI-project-Ignition.md b/Overview/TS_generated/rusEFI-project-Ignition.md
index 179223a8..7193564a 100644
--- a/Overview/TS_generated/rusEFI-project-Ignition.md
+++ b/Overview/TS_generated/rusEFI-project-Ignition.md
@@ -1,5 +1,7 @@
 # [rusEFI project](rusEFI-project)
+
 ## Ignition
+
 [Ignition settings](#ignition-settings)
 
 [Dwell](#dwell)
@@ -13,7 +15,8 @@
 [Ignition Intake Air Temp correction](#ignition-intake-air-temp-correction)
 
 ### Ignition settings
-![x](Overview/TS_generated/dialog_Ignition_settings.png)
+
+![x](/Overview/TS_generated/dialog_Ignition_settings.png)
 
 Two wire wasted: This is needed if your coils are individually wired (COP) and you wish to use batch ignition (wasted spark).
 
@@ -24,19 +27,23 @@ Use TPS-based Advance Table: This flag allows to use TPS for ignition lookup whi
 Dizzy out Pin: This implementation makes a pulse every time one of the coils is charged, using coil dwell for pulse width. See also tachOutputPin
 
 ### Dwell
-![x](Overview/TS_generated/dialog_Dwell.png)
+
+![x](/Overview/TS_generated/dialog_Dwell.png)
 
 ### Ignition Cylinder Extra Timing
-![x](Overview/TS_generated/dialog_Ignition_Cylinder_Extra_Timing.png)
+
+![x](/Overview/TS_generated/dialog_Ignition_Cylinder_Extra_Timing.png)
 
 ### Ignition Table
-![x](Overview/TS_generated/dialog_Ignition_Table.png)
+
+![x](/Overview/TS_generated/dialog_Ignition_Table.png)
 
 ### Warmup timing correction
-![x](Overview/TS_generated/dialog_Warmup_timing_correction.png)
+
+![x](/Overview/TS_generated/dialog_Warmup_timing_correction.png)
 
 ### Ignition Intake Air Temp correction
-![x](Overview/TS_generated/dialog_Ignition_Intake_Air_Temp_correction.png)
 
+![x](/Overview/TS_generated/dialog_Ignition_Intake_Air_Temp_correction.png)
 
 generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020
diff --git a/Overview/TS_generated/rusEFI-project-Sensors.md b/Overview/TS_generated/rusEFI-project-Sensors.md
index be9aabc8..add60a87 100644
--- a/Overview/TS_generated/rusEFI-project-Sensors.md
+++ b/Overview/TS_generated/rusEFI-project-Sensors.md
@@ -1,5 +1,7 @@
 # [rusEFI project](rusEFI-project)
+
 ## Sensors
+
 [Trigger Inputs](#trigger-inputs)
 
 [Other Sensor Inputs](#other-sensor-inputs)
@@ -32,7 +34,7 @@
 
 [Narrow to Wideband approximation](#narrow-to-wideband-approximation)
 
-[CJ125 Settings (wbo decoder)](#cj125-settings-(wbo-decoder))
+[CJ125 Settings (wbo decoder)](#cj125-settings-wbo-decoder)
 
 [Speed sensor](#speed-sensor)
 
@@ -41,7 +43,8 @@
 [EGT inputs](#egt-inputs)
 
 ### Trigger Inputs
-![x](Overview/TS_generated/dialog_Trigger_Inputs.png)
+
+![x](/Overview/TS_generated/dialog_Trigger_Inputs.png)
 
 Invert Primary: This setting flips the signal from the primary engine speed sensor.
 
@@ -51,39 +54,48 @@ Cam Sync/VVT input: Camshaft input could be used either just for engine phase de
 TODO #660
 
 ### Other Sensor Inputs
-![x](Overview/TS_generated/dialog_Other_Sensor_Inputs.png)
+
+![x](/Overview/TS_generated/dialog_Other_Sensor_Inputs.png)
 
 Throttle Up switch: Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata
 
 ### Analog Input Settings
-![x](Overview/TS_generated/dialog_Analog_Input_Settings.png)
+
+![x](/Overview/TS_generated/dialog_Analog_Input_Settings.png)
 
 ### CLT sensor
-![x](Overview/TS_generated/dialog_CLT_sensor.png)
+
+![x](/Overview/TS_generated/dialog_CLT_sensor.png)
 
 ### IAT sensor
-![x](Overview/TS_generated/dialog_IAT_sensor.png)
+
+![x](/Overview/TS_generated/dialog_IAT_sensor.png)
 
 ### aux1 Thermistor Settings
-![x](Overview/TS_generated/dialog_aux1_Thermistor_Settings.png)
+
+![x](/Overview/TS_generated/dialog_aux1_Thermistor_Settings.png)
 
 ### aux2 Thermistor Settings
-![x](Overview/TS_generated/dialog_aux2_Thermistor_Settings.png)
+
+![x](/Overview/TS_generated/dialog_aux2_Thermistor_Settings.png)
 
 ### TPS
-![x](Overview/TS_generated/dialog_TPS.png)
+
+![x](/Overview/TS_generated/dialog_TPS.png)
 
 TPS low value detection threshold(%): TPS error detection, what TPS % value is unrealistically low
 
 TPS high value detection threshold(%): TPS error detection, what TPS % value is unrealistically high
 
 ### Accelerator pedal
-![x](Overview/TS_generated/dialog_Accelerator_pedal.png)
+
+![x](/Overview/TS_generated/dialog_Accelerator_pedal.png)
 
 Down (WOT) voltage: Pedal in the floor
 
 ### MAP sensor
-![x](Overview/TS_generated/dialog_MAP_sensor.png)
+
+![x](/Overview/TS_generated/dialog_MAP_sensor.png)
 
 Measure Map Only In One Cylinder: Useful for individual intakes
 
@@ -92,25 +104,28 @@ Measure Map Only In One Cylinder: Useful for individual intakes
 Measure Map Only In One Cylinder: Useful for individual intakes
 
 ### MAP sampling
-![x](Overview/TS_generated/dialog_MAP_sampling.png)
+
+![x](/Overview/TS_generated/dialog_MAP_sampling.png)
 
 ### Baro sensor
-![x](Overview/TS_generated/dialog_Baro_sensor.png)
+
+![x](/Overview/TS_generated/dialog_Baro_sensor.png)
 
 ### MAF sensor
-![x](Overview/TS_generated/dialog_MAF_sensor.png)
 
-### MAF sensor
-![x](Overview/TS_generated/dialog_MAF_sensor.png)
+![x](/Overview/TS_generated/dialog_MAF_sensor.png)
 
 ### EGO sensor
-![x](Overview/TS_generated/dialog_EGO_sensor.png)
+
+![x](/Overview/TS_generated/dialog_EGO_sensor.png)
 
 ### Narrow to Wideband approximation
-![x](Overview/TS_generated/dialog_Narrow_to_Wideband_approximation.png)
+
+![x](/Overview/TS_generated/dialog_Narrow_to_Wideband_approximation.png)
 
 ### CJ125 Settings (wbo decoder)
-![x](Overview/TS_generated/dialog_CJ125_Settings_wbo_decoder.png)
+
+![x](/Overview/TS_generated/dialog_CJ125_Settings_wbo_decoder.png)
 
 Is UA input divided?: Is your UA CJ125 output wired to MCU via resistor divider?
 
@@ -118,13 +133,15 @@ Is UR input divided?: Is your UR CJ125 output wired to MCU via resistor divider?
 Looks like 3v range should be enough, divider generally not needed.
 
 ### Speed sensor
-![x](Overview/TS_generated/dialog_Speed_sensor.png)
+
+![x](/Overview/TS_generated/dialog_Speed_sensor.png)
 
 ### Oil pressure
-![x](Overview/TS_generated/dialog_Oil_pressure.png)
+
+![x](/Overview/TS_generated/dialog_Oil_pressure.png)
 
 ### EGT inputs
-![x](Overview/TS_generated/dialog_EGT_inputs.png)
 
+![x](/Overview/TS_generated/dialog_EGT_inputs.png)
 
 generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020
diff --git a/Overview/TS_generated/rusEFI-project.md b/Overview/TS_generated/rusEFI-project.md
index f0a8d6fc..024c3986 100644
--- a/Overview/TS_generated/rusEFI-project.md
+++ b/Overview/TS_generated/rusEFI-project.md
@@ -1,7 +1,9 @@
-# [Base Engine](rusEFI-project-Base-Engine)
+# rusEFI Project
 
-<a href='rusEFI-project-Base-Engine'>![x](Overview/TS_generated/top_level_Base_Engine.png)
-</a>[Base Engine Settings](rusEFI-project-Base-Engine#base-engine-settings)
+## [Base Engine](rusEFI-project-Base-Engine)
+
+[x](/Overview/TS_generated/top_level_Base_Engine.png)
+[Base Engine Settings](rusEFI-project-Base-Engine#base-engine-settings)
 
 [Trigger](rusEFI-project-Base-Engine#trigger)
 
@@ -11,7 +13,7 @@
 
 [Starter relay output](rusEFI-project-Base-Engine#starter-relay-output)
 
-[Fuel pump  rail](rusEFI-project-Base-Engine#fuel-pump--rail)
+[Fuel pump  rail](rusEFI-project-Base-Engine#fuel-pump-rail)
 
 [Fan Settings](rusEFI-project-Base-Engine#fan-settings)
 
@@ -21,11 +23,10 @@
 
 [Status LEDs](rusEFI-project-Base-Engine#status-leds)
 
+## [Fuel](rusEFI-project-Fuel)
 
-# [Fuel](rusEFI-project-Fuel)
-
-<a href='rusEFI-project-Fuel'>![x](Overview/TS_generated/top_level_Fuel.png)
-</a>[Injection settings](rusEFI-project-Fuel#injection-settings)
+[x](/Overview/TS_generated/top_level_Fuel.png)
+[Injection settings](rusEFI-project-Fuel#injection-settings)
 
 [Injector dead time](rusEFI-project-Fuel#injector-dead-time)
 
@@ -43,17 +44,16 @@
 
 [tCharge Settings](rusEFI-project-Fuel#tcharge-settings)
 
-[Accel/Decel Enrichment](rusEFI-project-Fuel#accel/decel-enrichment)
+[Acceleration or Deceleration Enrichment](rusEFI-project-Fuel#acceleration-or-deceleration-enrichment)
 
-[TPS/TPS Acceleration Extra Fuel(ms)](rusEFI-project-Fuel#tps/tps-acceleration-extra-fuel(ms))
+[TPS Acceleration Extra Fuel](rusEFI-project-Fuel#tps-acceleration-extra-fuel)
 
 [Engine Load Acceleration Enrichment Taper](rusEFI-project-Fuel#engine-load-acceleration-enrichment-taper)
 
+## [Ignition](rusEFI-project-Ignition)
 
-# [Ignition](rusEFI-project-Ignition)
-
-<a href='rusEFI-project-Ignition'>![x](Overview/TS_generated/top_level_Ignition.png)
-</a>[Ignition settings](rusEFI-project-Ignition#ignition-settings)
+[x](/Overview/TS_generated/top_level_Ignition.png)
+[Ignition settings](rusEFI-project-Ignition#ignition-settings)
 
 [Dwell](rusEFI-project-Ignition#dwell)
 
@@ -65,11 +65,10 @@
 
 [Ignition Intake Air Temp correction](rusEFI-project-Ignition#ignition-intake-air-temp-correction)
 
+## [Cranking](rusEFI-project-Cranking)
 
-# [Cranking](rusEFI-project-Cranking)
-
-<a href='rusEFI-project-Cranking'>![x](Overview/TS_generated/top_level_Cranking.png)
-</a>[Cranking Settings](rusEFI-project-Cranking#cranking-settings)
+[x](/Overview/TS_generated/top_level_Cranking.png)
+[Cranking Settings](rusEFI-project-Cranking#cranking-settings)
 
 [Cranking Coolant Temperature Multiplier](rusEFI-project-Cranking#cranking-coolant-temperature-multiplier)
 
@@ -77,11 +76,10 @@
 
 [Cranking TPS Multiplier](rusEFI-project-Cranking#cranking-tps-multiplier)
 
+## [Idle](rusEFI-project-Idle)
 
-# [Idle](rusEFI-project-Idle)
-
-<a href='rusEFI-project-Idle'>![x](Overview/TS_generated/top_level_Idle.png)
-</a>[Idle settings](rusEFI-project-Idle#idle-settings)
+[x](/Overview/TS_generated/top_level_Idle.png)
+[Idle settings](rusEFI-project-Idle#idle-settings)
 
 [Idle hardware](rusEFI-project-Idle#idle-hardware)
 
@@ -91,11 +89,10 @@
 
 [Warmup Idle multiplier](rusEFI-project-Idle#warmup-idle-multiplier)
 
+## [Advanced](rusEFI-project-Advanced)
 
-# [Advanced](rusEFI-project-Advanced)
-
-<a href='rusEFI-project-Advanced'>![x](Overview/TS_generated/top_level_Advanced.png)
-</a>[Boost Control](rusEFI-project-Advanced#boost-control)
+[x](/Overview/TS_generated/top_level_Advanced.png)
+[Boost Control](rusEFI-project-Advanced#boost-control)
 
 [General Purpose PWM 1](rusEFI-project-Advanced#general-purpose-pwm-1)
 
@@ -129,11 +126,10 @@
 
 [FSIO Curve #4](rusEFI-project-Advanced#fsio-curve-#4)
 
+## [Sensors](rusEFI-project-Sensors)
 
-# [Sensors](rusEFI-project-Sensors)
-
-<a href='rusEFI-project-Sensors'>![x](Overview/TS_generated/top_level_Sensors.png)
-</a>[Trigger Inputs](rusEFI-project-Sensors#trigger-inputs)
+[x](/Overview/TS_generated/top_level_Sensors.png)
+[Trigger Inputs](rusEFI-project-Sensors#trigger-inputs)
 
 [Other Sensor Inputs](rusEFI-project-Sensors#other-sensor-inputs)
 
@@ -173,15 +169,14 @@
 
 [EGT inputs](rusEFI-project-Sensors#egt-inputs)
 
+## [Controller](rusEFI-project-Controller)
 
-# [Controller](rusEFI-project-Controller)
+[x](/Overview/TS_generated/top_level_Controller.png)
+[ECU stimulator](rusEFI-project-Controller#ecu-stimulator)
 
-<a href='rusEFI-project-Controller'>![x](Overview/TS_generated/top_level_Controller.png)
-</a>[ECU stimulator](rusEFI-project-Controller#ecu-stimulator)
+[Data logging Settings](rusEFI-project-Controller#data-logging-settings)
 
-[Datalogging Settings](rusEFI-project-Controller#datalogging-settings)
-
-[Bench Test & Commands](rusEFI-project-Controller#bench-test-&-commands)
+[Bench Test and Commands](rusEFI-project-Controller#bench-test-and-commands)
 
 [Popular vehicles](rusEFI-project-Controller#popular-vehicles)
 
@@ -197,13 +192,13 @@
 
 [TLE8888](rusEFI-project-Controller#tle8888)
 
-[All Pins 1/3](rusEFI-project-Controller#all-pins-1/3)
+[All Pins 1 of 3](rusEFI-project-Controller#all-pins-1-of-3)
 
-[All Pins 2/3](rusEFI-project-Controller#all-pins-2/3)
+[All Pins 2 of 3](rusEFI-project-Controller#all-pins-2-of-3)
 
-[All Pins 3/3](rusEFI-project-Controller#all-pins-3/3)
+[All Pins 3 of 3](rusEFI-project-Controller#all-pins-3-of-3)
 
-[Experimental/Broken](rusEFI-project-Controller#experimental/broken)
+[Experimental or Broken](rusEFI-project-Controller#experimental-or-broken)
 
 [Multispark](rusEFI-project-Controller#multispark)
 
@@ -223,6 +218,4 @@
 
 [AntiLag Settings NOT WORKING](rusEFI-project-Controller#antilag-settings-not-working)
 
-
-
-generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020
+generated by class com.rusefi.MdGenerator on Fri May 01 15:24:28 EDT 2020 manually corrected!