rusefi
/
rusefi_documentation
mirror of https://github.com/rusefi/rusefi_documentation.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

merge rusEFI wiki

This commit is contained in:
GitHub Action 2021-03-25 07:38:13 +00:00
parent 12d2251c5e b66cb28b1f
commit 8341314ba3
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Trigger-Configuration-Guide.md
View File

@ -30,15 +30,15 @@ To inspect the missing tooth signal's shape:
3. Crank (or run) the engine for a few seconds, until you see a trace appear on the screen in TunerStudio, then release the starter.
4. Determine which of the below images matches your trigger pattern:
#### Correct missing tooth shape
#### This is the correct missing tooth shape:
< image correct >
![correct VR missing tooth pattern](https://i.imgur.com/x3AK5sU.jpg)
#### Swap your wires!
#### This is the wrong missing tooth shape - swap your wires:
< image wrong >
![wrong VR sensor missing tooth pattern](https://i.imgur.com/rJRJWP7.jpg)
> These images were collected on a Volvo 60-2 trigger wheel, the exact timing may vary, but a long period of low preceding the long high time (marked with arrow on the wrong image) is the clear indicator of a miswired sensor.
> These images were collected on a Volvo 60-2 trigger wheel, the exact timing may vary, but a long period of low preceding the long high time (marked with arrow on the wrong image) is the clear indicator of a miswired sensor. The correct pattern is equally sized low periods, with a single long high period.
5. If your missing tooth looks like the wrong example, swap the VR+ and VR- wires. Repeat steps 2-4, and double check that it now looks like the good example.
6. In TunerStudio, ensure that "Use only rising edge" is set to `true`, and "Invert Primary" is set to `false`. (found in the menu *Base Engine* > *Trigger*). These are the only correct options for a MAX992x-based VR interface.