rusefi
/
rusefi_documentation
mirror of https://github.com/rusefi/rusefi_documentation.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

merge rusEFI wiki

This commit is contained in:
GitHub Action 2023-12-18 13:35:42 +00:00
parent 0ed3c1a6b6 e94ed9008b
commit 863640f28c
1 changed files with 5 additions and 59 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
WBO.md
View File

@ -9,63 +9,13 @@
## rusEFI Wide band oxygen
rusEFI has two probably working implementations for Bosch wideband oxygen control:
* We have cj125 integration
* We like [https://github.com/mck1117/wideband](https://github.com/mck1117/wideband) even more. See [the forum thread](https://rusefi.com/forum/viewtopic.php?f=4&t=1856)
## rusEFI wideband module
* [https://github.com/mck1117/wideband](https://github.com/mck1117/wideband) is what we use [the forum thread](https://rusefi.com/forum/viewtopic.php?f=4&t=1856)
See [rusEFI-Wideband-Controller](rusEFI-Wideband-Controller)
See [Hellen-WBO](Hellen-WBO)
TODO: document it better
## cj125 troubleshooting
We have a few rusEFI console commands relevant for cj125
``cj125_info``
``cj125_restart``
``cj125_calibrate``
![x](Overview/wbo/cj125_heating_4_9.png)
AndreiKA says Prometheus works
Matthew says 0.3 SOIC-24 boards works
Wideband controller based on Bosch CJ125 chip
green is vUr, temperature feedback
red is duty cycle
yellow is vUa, the lambda current measurement
white is converted AFR
fully operating in <30 seconds
in to closed loop in ~18 seconds
P=30
I=5
D=0.3
though you could probably use D=0 since the system is already damped so hard
50Hz
[Older SOIC-24 board - double sided assembly](https://github.com/rusefi/hw_modular/tree/master/cj125_Module)
[Newer LQFP-32 board - single side assembly](https://github.com/rusefi/rusefi/tree/master/hardware/CJ125_board)
## Naming Convention
pin 1 red: IP=Pump Current
@ -86,14 +36,6 @@ pin 6 black: UN = Vs = sensor voltage output = INRC
![x](FAQ/LSU_42_LSU_49_Plug_Comparsion.jpg)
With SOIC-24 rusEFI module W1=W10=0R means LSU 4.2
With SOIC-24 rusEFI module W1=W10=Do not populate means LSU 4.9
**Q: Any troubleshooting hints when things do not work?**
A: VM wire between CJ125 and sensor is virtual ground, should measure 2.5v when sensor is connected and when sensor is disconnected.
## Part Numbers
### Connector Shells
@ -121,3 +63,7 @@ Part numbers provided by and available for purchase at corsa-technic.com individ
## ADV
1J0973705 8R0906262E
## CJ125
* CJ125 is an unavailable older old chip replaced by CJ135. CJ125 is not available from legit distributors for many years now. There is no documentation for CJ135. Some time ago we chose to no longer spend resources on CJ125.