From a201fe1d9114ae5fc5fd10cffec317591ccbf3a9 Mon Sep 17 00:00:00 2001
From: rusefillc <48498823+rusefillc@users.noreply.github.com>
Date: Sun, 6 Sep 2020 00:02:18 -0400
Subject: [PATCH] Created HOWTO Crimp Ampseal (markdown)

---
 HOWTO-Crimp-Ampseal.md | 9 +++++++++
 1 file changed, 9 insertions(+)
 create mode 100644 HOWTO-Crimp-Ampseal.md

diff --git a/HOWTO-Crimp-Ampseal.md b/HOWTO-Crimp-Ampseal.md
new file mode 100644
index 00000000..5ccda943
--- /dev/null
+++ b/HOWTO-Crimp-Ampseal.md
@@ -0,0 +1,9 @@
+
+
+https://youtu.be/24bNFu7a9lc
+
+If your pins are not loose, use nice wire cutters to separate individual terminals from the loom - do not bend break terminals from the loom.
+
+Pop red wedge lock up into "insertion position" - do not remove red wedge lock completely. You only need to remove red wedge lock completely in case of emergency if normal de-pinning does not work.
+
+While Matt says to only strip 3mm of the wire, Andrey would strip TDB length (about 8mm?) so that you can hit the round cap on the terminal. Having the wire bottoming out allows for a quicker crimping by simplifying wire positioning.
\ No newline at end of file