Updated Proteus (markdown)
This commit is contained in:
parent
125c710e99
commit
badf212db1
|
@ -48,3 +48,9 @@ black oxide, #4 3/8" long screws recommended
|
||||||
Most boards will need a debug header installed if you want to attach a debugger (not used for normal users). The recommended connector is Samtec PN `FTSH-105-01-F-DV-007-K`. When soldering the connector, the keying notch goes towards the center of the board, nearer to the 23p center connector.
|
Most boards will need a debug header installed if you want to attach a debugger (not used for normal users). The recommended connector is Samtec PN `FTSH-105-01-F-DV-007-K`. When soldering the connector, the keying notch goes towards the center of the board, nearer to the 23p center connector.
|
||||||
|
|
||||||
Any debugger compatible with the standard 10-pin Cortex Debug Header should work, though the [STLINK-V3 Mini](https://www.st.com/en/development-tools/stlink-v3mini.html) is recommmended. It's available for $10-12 US from normal distributors like Mouser/Digikey. A ribbon cable is included so the connector and programmer are all that's required to debug on Proteus.
|
Any debugger compatible with the standard 10-pin Cortex Debug Header should work, though the [STLINK-V3 Mini](https://www.st.com/en/development-tools/stlink-v3mini.html) is recommmended. It's available for $10-12 US from normal distributors like Mouser/Digikey. A ribbon cable is included so the connector and programmer are all that's required to debug on Proteus.
|
||||||
|
|
||||||
|
|
||||||
|
TODO:
|
||||||
|
https://github.com/rusefi/proteus-m73tu-adapter
|
||||||
|
https://github.com/rusefi/proteus-XXX-adapter
|
||||||
|
https://github.com/rusefi/proteus-rx8-adapter
|
Loading…
Reference in New Issue