diff --git a/Hellen-128-Mercedes.md b/Hellen-128-Mercedes.md
index abdc75ca..325a3456 100644
--- a/Hellen-128-Mercedes.md
+++ b/Hellen-128-Mercedes.md
@@ -4,6 +4,21 @@ Available at [rusEFI store](https://www.shop.rusefi.com/shop/p/hellen-128-merced
 
 This development board is PnP for Mercedes with the 128 Pin ECU (could be used on M104, M111, M112 and M113 engines; late 90s-early 2000s. confirm your ECU _harness_)
 
+## Hardware features
+
+* ME 2.0/2.1 pinout
+* Up to 8 Injectors.
+* Up to 8 Coils (Low impedance or Smart coils)
+* On board WBO controller
+* ETB support
+* VR Crank and HAll Cam sensor support
+* 1/2 channel Knock input
+* Factory Engine Sensor input support
+* CAN communication
+* Possibility to extend IOs (Inputs/Outputs)
+* USB connection
+* SD-CARD logging
+
 ## Firmware
 
 [Download Release](https://github.com/rusefi/rusefi/releases/latest/download/rusefi_bundle_hellen128.zip)
@@ -26,21 +41,6 @@ This development board is PnP for Mercedes with the 128 Pin ECU (could be used o
 
 [Test points](Hardware/Hellen/hellen128mercedes-rev-b-reference-4-cylinder-test-points.png)
 
-## Hardware features
-
-* ME 2.0/2.1 pinout
-* Up to 8 Injectors.
-* Up to 8 Coils (Low impedance or Smart coils)
-* On board WBO controller
-* ETB support
-* VR Crank and HAll Cam sensor support
-* 1/2 channel Knock input
-* Factory Engine Sensor input support
-* CAN communication
-* Possibility to extend IOs (Inputs/Outputs)
-* USB connection
-* SD-CARD logging
-
 ## Hardware extension/ configuration
 
 ### Ignition jumpers (rev. a, rev. b)
@@ -187,5 +187,4 @@ ISL9V3040S3S is the large IGBT driver (same thing as ISL9V3040S3ST)
 
 Smaller NGD8201AN or ISL9V3040D3ST could probably be used as well.
 
-
-See also [HOWTO-M111-on-microRusEFI](HOWTO-M111-on-microRusEFI)
\ No newline at end of file
+See also [HOWTO-M111-on-microRusEFI](HOWTO-M111-on-microRusEFI)