rusefi
/
rusefi_documentation
mirror of https://github.com/rusefi/rusefi_documentation.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #139 from chuckwagoncomputing/install-instructions 

Move Frank* install instructions
This commit is contained in:
David Holdeman 2021-05-17 18:05:40 -05:00 committed by GitHub
parent 281b007333 e34c5ec68a
commit c0bebf5bf1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 16 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
HOWTO/HOWTO-Install-rusEFI-Firmware.md Normal file
View File

@ -0,0 +1,13 @@
### Install firmware on Frankenstein, Frankenso, and Discovery
1. Connect the stm32f4discovery ('brain board') to the IO board, place jumpers like XYZ, then connect to a PC with a mini-USB cable. Mini-USB cable is used to power and to program the brain board. See below procedure found [here](http://rusefi.com/forum/viewtopic.php?f=5&t=210&start=23)
2. Before loading rusEFI firmware - if you have one of the newer Rev D STM32 discovery boards - you need to update discovery's firmware. That's in the "Firmware" dialog of ST Link utility, as shown in this picture.
![STLink Firmware Update](Images/Stlink_firmware_update.png)
![Discovery Upload Wire](Images/discovery_upload_wire.JPG)
* To upload the binary image into the microcontroller you will need to download & install [STM32 ST-LINK utility](http://www.st.com/st-web-ui/static/active/en/st_prod_software_internet/resource/technical/software/utility/stsw-link004.zip). (this is both the utility and the driver) Once installed it will look like this.
![STLink Utility](Images/st_link_utility.png)
* You should click '''Target --> Program...''' , browse to the rusefi.bin you have downloaded and hit Start button like this
![STLink Start](Images/st_link_start.png)
* After you have programmed the chip, you should click '''Target --> Disconnect''' and hit the '''black button''' on the discovery board '''to reset''' the firmware. After you hit the reset button, you should expect all four LEDs to blink once and then you should see just the '''blue LED blinking'''. If all is good, proceed to the Dev Console below.

20
HOWTO/HOWTO-quick-start.md
View File

@ -18,28 +18,14 @@
## Once you get your hardware: ## Once you get your hardware:
### Install firmware on Frankenstein, Frankenso, and Discovery
_If you have any other rusEFI board, such as microRusEFI, Proteus, or Hellen, your board comes with firmware installed, and you can skip to "Update Firmware"._
1. Connect the stm32f4discovery ('brain board') to the IO board, place jumpers like XYZ, then connect to a PC with a mini-USB cable. Mini-USB cable is used to power and to program the brain board. See below procedure found [here](http://rusefi.com/forum/viewtopic.php?f=5&t=210&start=23)
2. Before loading rusEFI firmware - if you have one of the newer Rev D STM32 discovery boards - you need to update discovery's firmware. That's in the "Firmware" dialog of ST Link utility, as shown in this picture.
![STLink Firmware Update](Images/Stlink_firmware_update.png)
![Discovery Upload Wire](Images/discovery_upload_wire.JPG)
* To upload the binary image into the microcontroller you will need to download & install [STM32 ST-LINK utility](http://www.st.com/st-web-ui/static/active/en/st_prod_software_internet/resource/technical/software/utility/stsw-link004.zip). (this is both the utility and the driver) Once installed it will look like this.
![STLink Utility](Images/st_link_utility.png)
* You should click '''Target --> Program...''' , browse to the rusefi.bin you have downloaded and hit Start button like this
![STLink Start](Images/st_link_start.png)
* After you have programmed the chip, you should click '''Target --> Disconnect''' and hit the '''black button''' on the discovery board '''to reset''' the firmware. After you hit the reset button, you should expect all four LEDs to blink once and then you should see just the '''blue LED blinking'''. If all is good, proceed to the Dev Console below.
### Update Firmware ### Update Firmware
Now that your board has rusEFI firmware installed on it, the firmware can be updated without using STLink software. You should ensure your firmware is up to date before proceeding. Your board comes with rusEFI firmware installed on it, but it should be updated.
[How to update your firmware](HOWTO-Update-Firmware) [How to update your firmware](HOWTO-Update-Firmware)
If you have a Frankenso, Frankenstein, or are just messing with a Discovery, you will need to install firmware first. See [these instructions.](HOWTO-Install-rusEFI-Firmware)
## rusEFI Console ## rusEFI Console
[Console](Console) [Console](Console)