From c0c42482ca5598d48dd8cf8e9059be654ba01c37 Mon Sep 17 00:00:00 2001 From: Matthew Kennedy Date: Tue, 3 Nov 2020 21:08:45 -0800 Subject: [PATCH] Updated Proteus (markdown) --- Proteus.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Proteus.md b/Proteus.md index 8100aac2..22f15361 100644 --- a/Proteus.md +++ b/Proteus.md @@ -41,6 +41,6 @@ Source & production files at: https://github.com/mck1117/proteus/ ## Dev Access -Most boards will need a debug header installed if you want to attach a debugger (not used for normal users). The recommended connector is Samtec PN `FTSH-105-01-F-DV-007-K`. +Most boards will need a debug header installed if you want to attach a debugger (not used for normal users). The recommended connector is Samtec PN `FTSH-105-01-F-DV-007-K`. When soldering the connector, the keying notch goes towards the center of the board, nearer to the 23p center connector. Any debugger compatible with the standard 10-pin Cortex Debug Header should work, though the [STLINK-V3 Mini](https://www.st.com/en/development-tools/stlink-v3mini.html) is recommmended. It's available for $10-12 US from normal distributors like Mouser/Digikey. A ribbon cable is included so the connector and programmer are all that's required to debug on Proteus. \ No newline at end of file